darrylta Posted July 26, 2010 Report Share Posted July 26, 2010 (edited) I cleaned up a Colt 1918 BAR parts kit today and noticed the nice NOS like front grip was stamped with the letter E inside the grip. Who were the makers of Colt wood on the early BARs and what manufacturer used the letter "E". Thanks, Darryl Edited July 28, 2010 by darrylta Link to comment Share on other sites More sharing options...
winbar Posted August 9, 2010 Report Share Posted August 9, 2010 I cleaned up a Colt 1918 BAR parts kit today and noticed the nice NOS like front grip was stamped with the letter E inside the grip. Who were the makers of Colt wood on the early BARs and what manufacturer used the letter "E". Thanks, Darryl Darryl, I looked at my Swedish BAR handguards and found one that has an"E" stamped inside like yours. I bought a total of 5 handguards from Ohio Ordnance in 2001. 2 had the royal crown stamped on the lower outside front of the handguard, 2 had no markings, and the 5th one has the "E" inside. Looking at the finish and metal I would say all of them were made at the same place. I bought an M1921 gastube/handguard assembly on ebay back in 2003. The handguard on that assembly looks to be from a rifle that was actually used. It has a capitol "N 3" stamped on the inside at the front right up against the end of the flat surface milled for the handguard bracket, as well as the royal crown on the outside lower front. Doug Link to comment Share on other sites More sharing options...
darrylta Posted August 10, 2010 Author Report Share Posted August 10, 2010 (edited) WinBar, I know that Colt made the first batch of kg m/1921 BAR's shipped to Europe. I guess it's still a mystery if Colt stamped their furniture and if they did, did they use the C and arrow stamping. I checked with the WWIIBARMAN guys and did not receive a definitive from them either. Thanks for the input, Darryl Edited August 10, 2010 by darrylta Link to comment Share on other sites More sharing options...
winbar Posted August 10, 2010 Report Share Posted August 10, 2010 WinBar, I know that Colt made the first batch of kg m/1921 BAR's shipped to Europe. I guess it's still a mystery if Colt stamped their furniture and if they did, did they use the C and arrow stamping. I checked with the WWIIBARMAN guys and did not receive a definitive from them either. Thanks for the input, Darryl Darryl, I have what is probably a Colt 1919 commercial handguard that I bought from J Curtis Earl back in 1996. It has the "C" with arrow on the front face of the handguard. I took some pictures of my early handguards for George (Junkyardslug) Knott but I don't think they are in the photo album on WWIIBARMAN any more. I'll look to see if I have any pics with the cartouche. Doug Link to comment Share on other sites More sharing options...
darrylta Posted August 11, 2010 Author Report Share Posted August 11, 2010 (edited) WinBar, My hand protector has aluminum liners, I've heard that the Colt liners were steel. Is that correct? Thanks, Darryl Edited August 11, 2010 by darrylta Link to comment Share on other sites More sharing options...
winbar Posted August 12, 2010 Report Share Posted August 12, 2010 WinBar, My hand protector has aluminum liners, I've heard that the Colt liners were steel. Is that correct? Thanks, Darryl Darryl, My "1919" handguard looks like a 1918 handguard (no heat shields). If you look in Jim Ballou's book on page 66 there is a schematic showing a Colt 1919. The only difference from a 1918 I see is that the recoil spring has been moved to the rear. Doug Link to comment Share on other sites More sharing options...
darrylta Posted August 12, 2010 Author Report Share Posted August 12, 2010 WinBar, Attached is a photo of some Swedish MGs, the bottom one is an early Colt m21 with heat protection liners in the hand guard? Food for thought, Darryl Link to comment Share on other sites More sharing options...
winbar Posted August 14, 2010 Report Share Posted August 14, 2010 (edited) WinBar, Attached is a photo of some Swedish MGs, the bottom one is an early Colt m21 with heat protection liners in the hand guard? Food for thought, Darryl Darryl, I noticed in your picture of Swedish BARs that the third one down has a " Chilean" style buttstock but no pistol grip. Jim Ballou's write-up on the M21's mentions several parts being ordered specifically by the Swedes. He doesn't mention the handguard though. I have never seen a picture of a "Swedish" handguard on any other original Colt contract gun. Have you? Doug Oops! Looks like there is a pistol grip behind the gun rack peg but no checkering on the buttstock. Doug Edited August 14, 2010 by winbar Link to comment Share on other sites More sharing options...
darrylta Posted August 14, 2010 Author Report Share Posted August 14, 2010 No I haven't. The linered handguard may be a Swedish mod of a later date on the Colt m21. Thanks for the help, Darryl Link to comment Share on other sites More sharing options...
winbar Posted August 14, 2010 Report Share Posted August 14, 2010 No I haven't. The linered handguard may be a Swedish mod of a later date on the Colt m21. Thanks for the help, Darryl Darryl, I looked at all my M21 handguards (6 total) again with a magnifying glass to see if there was a Colt " Doug Link to comment Share on other sites More sharing options...
darrylta Posted August 15, 2010 Author Report Share Posted August 15, 2010 Doug, I appreciate your help and research on the subject. I expect to receive my Marlin Rockwell BAR in early October. I'm seeing that with the many BAR configurations both military and commercial, the options to outfit a receiver is huge. Good luck on your build, Darryl Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now