Navy Brat Posted December 6, 2016 Report Share Posted December 6, 2016 Would it be possible for someone to help me determine what kind of rifle I have inherited? It was purchased in the mid 1980s and came in a green and white cardboard box with "Springfield Armory" printed on it. It came with an owners manual with a drawing on the cover of a soldier lying on the ground. The wood is a dark chocolate brown with a matte finish. The grain of the wood runs parallel lengthwise, not diagonal. It has a folding bi-pod, winter trigger, and an attached fabric sling. Here is a list of three markings on the gun: 1. On the metal part that faces you when you're firing it: 7.62 mm BM59 Springfield Armory 0000946 2. On the left face of that same metal part: P B BM59 3. On the right face, on a movable piece of metal between the trigger and the magazine: P B - BM59 IAP Thanks in advance for any help offered. It will be greatly appreciated! Link to comment Share on other sites More sharing options...
Navy Brat Posted December 6, 2016 Author Report Share Posted December 6, 2016 Also, what is a "re-weld," and how do you identify one? Link to comment Share on other sites More sharing options...
Navy Brat Posted December 6, 2016 Author Report Share Posted December 6, 2016 I could also use some advice about how to find a buyer for this rifle in Virginia. I know about the Gun Broker auction website, but it's rather intimidating and I would prefer an easier solution. Link to comment Share on other sites More sharing options...
timkel Posted December 6, 2016 Report Share Posted December 6, 2016 This dealer has a good reputation.http://dealernfa.com/ Link to comment Share on other sites More sharing options...
John Ryan Posted December 6, 2016 Report Share Posted December 6, 2016 (edited) It is, of course a BM59 by Springfield Armory Inc of IL ( not the govt arsenal in Massachusetts) . This co was/is owned by the Reese family.They imported many "new old stock" Italian parts in the 80's and assembled very nice rifles out of them. Hence they had to add their name as a manufacturer to the existing Beretta name on the parts. Only more desirable, are the actual Italian made BM59 ( or BM62) from Beretta before 1984. I have not been following the market on these. Be aware that the market might be slow on these as there has been a huge volume of Italian army surplus BM59 partsonto the market in the past year and many people are building these rifles from parts. This might be eroding demand for Springfield built guns. Good luck. JR Edited December 6, 2016 by John Ryan Link to comment Share on other sites More sharing options...
TSMGguy Posted December 6, 2016 Report Share Posted December 6, 2016 (edited) Only more desirable, are the actual Italian made BM59 ( or BM62) from Beretta before 1984. The receiver on the OP's rifle was made by Beretta. That's what the PB on the side rail means. PB: Pietro Beretta, the world's oldest gun maker. The receiver was forged, rather than cast. Edited December 6, 2016 by TSMGguy Link to comment Share on other sites More sharing options...
Navy Brat Posted December 7, 2016 Author Report Share Posted December 7, 2016 (edited) Only more desirable, are the actual Italian made BM59 ( or BM62) from Beretta before 1984. The receiver on the OP's rifle was made by Beretta. That's what the PB on the side rail means. PB: Pietro Beretta, the world's oldest gun maker. The receiver was forged, rather than cast. What do you mean by "the OP's rifle," TSMGguy? Edited December 7, 2016 by Navy Brat Link to comment Share on other sites More sharing options...
Navy Brat Posted December 7, 2016 Author Report Share Posted December 7, 2016 So is my rifle definitely NOT a re-weld? Link to comment Share on other sites More sharing options...
jim c 351 Posted December 7, 2016 Report Share Posted December 7, 2016 Navy Brat,OP = Original Poster.Go on www.gunbroker.comDo a search by typing in your rifle info. This will give you an idea what they are selling for.Do a gun show search for your state.When you have determined an acceptable selling price attend a gun show and walk around with your rifle.You may want to attend a few shows without the rifle to get a feel for things. Also you can buy a "Blue Book" at the show.Jim C Link to comment Share on other sites More sharing options...
Navy Brat Posted December 7, 2016 Author Report Share Posted December 7, 2016 Navy Brat,OP = Original Poster.Go on www.gunbroker.comDo a search by typing in your rifle info. This will give you an idea what they are selling for.Do a gun show search for your state.When you have determined an acceptable selling price attend a gun show and walk around with your rifle.You may want to attend a few shows without the rifle to get a feel for things. Also you can buy a "Blue Book" at the show.Jim C Thank you, Jim! I appreciate your response. Link to comment Share on other sites More sharing options...
Navy Brat Posted December 7, 2016 Author Report Share Posted December 7, 2016 It is, of course a BM59 by Springfield Armory Inc of IL ( not the govt arsenal in Massachusetts) . This co was/is owned by the Reese family.They imported many "new old stock" Italian parts in the 80's and assembled very nice rifles out of them. Hence they had to add their name as a manufacturer to the existing Beretta name on the parts. Only more desirable, are the actual Italian made BM59 ( or BM62) from Beretta before 1984. I have not been following the market on these. Be aware that the market might be slow on these as there has been a huge volume of Italian army surplus BM59 partsonto the market in the past year and many people are building these rifles from parts. This might be eroding demand for Springfield built guns. Good luck. JR Thank you very much for your response, John. This is great information! Link to comment Share on other sites More sharing options...
John Ryan Posted December 7, 2016 Report Share Posted December 7, 2016 Only more desirable, are the actual Italian made BM59 ( or BM62) from Beretta before 1984. The receiver on the OP's rifle was made by Beretta. That's what the PB on the side rail means. PB: Pietro Beretta, the world's oldest gun maker. The receiver was forged, rather than cast. Yes the receiver was made by Beretta ( and is not welded) but not assembled into a rifle by them. Reese /Springfield Inc imported the parts, including finished new receivers and assembled many of them into finished rifles. Hence the Springfield Inc ser # as well as the Beretta marking. There were Beretta made guns ( imported before 1984) that have higher desirability due to the fact that they are Beretta factory assembled and serialized as opposed to the Reese /Springfield Inc built guns. ( which are still great guns). JR Link to comment Share on other sites More sharing options...
Navy Brat Posted December 8, 2016 Author Report Share Posted December 8, 2016 Only more desirable, are the actual Italian made BM59 ( or BM62) from Beretta before 1984. The receiver on the OP's rifle was made by Beretta. That's what the PB on the side rail means. PB: Pietro Beretta, the world's oldest gun maker. The receiver was forged, rather than cast. Yes the receiver was made by Beretta ( and is not welded) but not assembled into a rifle by them. Reese /Springfield Inc imported the parts, including finished new receivers and assembled many of them into finished rifles. Hence the Springfield Inc ser # as well as the Beretta marking. There were Beretta made guns ( imported before 1984) that have higher desirability due to the fact that they are Beretta factory assembled and serialized as opposed to the Reese /Springfield Inc built guns. ( which are still great guns). JR Thank you very much for clearing everything up, John! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now