The1930sRust Posted July 21, 2003 Report Share Posted July 21, 2003 In my continuing quest for ways to waste my free time, I sent my backup buttstock off to a friend who is a whiz with wood. The stock was an unfinished WWII style. As you can see from this image http://www.darklightimagery.net/thompson/patch01.jpg he was able to deftly fill in the hole with some walnut, albeit a darker wood. When you ran your fingers across it you couldn't even tell it was there. I then set about trying to stain the wood to match my other woods, and it actually came out a bit closer (less red after the Brownells dye was added) than my original stock. It still has some drying to do, but overall I am happy with the results. Curiously, the darker wood ended up staining lighter, so there is no mistaking a patch is in place. Would have been perfect if I was going to the British Lend Lease look! http://www.darklightimagery.net/thompson/patch02.jpg Mark "MP40": Happy? Happy now? Thanks for the impetus. Link to comment Share on other sites More sharing options...
TOMMY SMG Posted July 21, 2003 Report Share Posted July 21, 2003 Looks petty good to me Chris, How many coats of stain did you have to use and is it true the more coats you apply the darker it gets or will it only get so dark? I purchased an original set (buttstock and hortizonal forgrip) from Mr. Iannamico (Frank) last year and the original sling mounts were filled with the sling mounts relocated to the side (right side, I think, I'll have to check that?) of both peices. You can tell the difference, as it your case (little different color), but they still look good. Question, My 28 has the front vertical grip style on it and I would like to use the original lend lease buttstock I got from Frank, but I want to use the original front vertical grip, can I have it drilled and countersunk on the side or will it make it to weak and prone to break? I think I saw an old picture somewhere that had this lead lease type set-up? Jim (I'm giving the "Smilies" a break today!!!...) Link to comment Share on other sites More sharing options...
gijive Posted July 21, 2003 Report Share Posted July 21, 2003 Hi Chris, Looks real good! It looks just like the relocated sling swivels on the British Thompsons. The plugs didn't match the stain on the originals either. Nice job! Link to comment Share on other sites More sharing options...
The1930sRust Posted July 21, 2003 Author Report Share Posted July 21, 2003 I had, in the past, considered adding a sling swivel to my vertical grip, and my hold-testing seemed to indicate countersinking may not even be needed. I don't think you'd have to worry either way about breaking, IMHO. I think the Brits put swivels on both sides of the verticals, but I could be wrong about that. Staining this hunk of wood was trial and error. When I said it was raw wood, I lied. I recall adding one coat of boiled linseed oil about six months ago, but sanded it pretty good before staining this time. I added three coats of jacobean stain and one coat of walnut, because to my eye it was coming out too light. Then I dunked it in boiled linseed oil before adding the red Brownells dye. Then one more coat of linseed. This stock didn't behave as well as the first one. It is exuding stain! Gonna have to let it sit for a week or so and re-evaluate. The wood should darken with each coat, but I think my pre application of linseed months ago reduced this effect. They say the linseed will darken with age, too. Link to comment Share on other sites More sharing options...
mp40 Posted July 22, 2003 Report Share Posted July 22, 2003 http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif Yes, I am Chris! it looks great! now......all you need is an compensatorless front sight to complete the gun! (IMHO!) as I just love the 1921 look! strange...along time ago, I despised the vertical forgrip and the compensatorless look,as i prefered the 1928 military version of the Thompson! Link to comment Share on other sites More sharing options...
The1930sRust Posted July 22, 2003 Author Report Share Posted July 22, 2003 I, too, prefered the military look. Then I discovered Doug Richardsons vertical foregrip. I did not want to make the Westy 1928 "look" like a 21 per se. I recently discovered a reference in a 1936 AO catalog of a 1928 with ring sight, which I gather would have been the first 1928 offered. The Cutts was an option. So, I may yet lose the compensator and go for the "early 1928" look. That way I can at least say it isn't a 21 look alike, but modeled after the original 1928. Makes me feel better anyway, even if it makes some others cringe. Link to comment Share on other sites More sharing options...
TOMMY SMG Posted July 22, 2003 Report Share Posted July 22, 2003 Chris, Got home and checked out the wood I got for from Frank that we talked about earlier, I was wrong http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/dry.gif . The buttstock has the sling swivel countersink in the top, not on the side (I knew http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/ohmy.gif that!!!). The hortizontal forgrip has the countedsink on the left side, about 3/4" back from the front (about the same as the orginal countersink, on the bottom) of the grip to the front of the swivel and is cut so the bottom edge of the swivel is even with the bottm of the grip. It's the M1 style with the cross bolt and it has an "S 51" stamped in the side of it. I'd say the "S" = Savage, but not http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/unsure.gif sure what the "51" stands for http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/blink.gif ? Color looks petty much the same as yours, deep brownish/redish color. After looking it over, I'm not sure that the vertical grip would have much of a bite left for the screws after you countersunk one of the milled swivels down far enough to seat it? http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/unsure.gif Jim http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif Link to comment Share on other sites More sharing options...
The1930sRust Posted July 22, 2003 Author Report Share Posted July 22, 2003 The only vertical grip with swivel I've seen, page 46 of American Thunder, doesn't look like it was countersunk. Would it need to be? Link to comment Share on other sites More sharing options...
TOMMY SMG Posted July 22, 2003 Report Share Posted July 22, 2003 I'll take a look in my copy, page 46, OK http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif got it. I'll post some pix if I decide to do it (I'll call ya to help me http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/unsure.gif postem, every time I tried, didn't http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/dry.gif work and gave up http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/mad.gif !) Thanks, Jim http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif Link to comment Share on other sites More sharing options...
mp40 Posted July 22, 2003 Report Share Posted July 22, 2003 Chris, I cannot recall how your westy is stamped on the side, 1928? or ? Also, That 1936 AO catalog sounds pretty cool! any prices in it? good point that the compensator was an option! (evidently a popular one too!) I wonder what the compensator cost in the 20's and 30's? Link to comment Share on other sites More sharing options...
Sgt Posted July 22, 2003 Report Share Posted July 22, 2003 Chris-- Beautiful work. I love that patch job; looks just like they used to do it. Good staining job -- very deep rich color! Link to comment Share on other sites More sharing options...
The1930sRust Posted July 22, 2003 Author Report Share Posted July 22, 2003 My West Hurley is stamped US MODEL 1928. What would a new old stock Cutts cost you today? $200? Well, acording to the catalog of 1936, you could buy the whole gun for that. Looks like the Cutts added $25 to the cost of a $200 Model 28A. Of course, in adjusted dollars, that's still several thousand...[/u] Link to comment Share on other sites More sharing options...
gijive Posted July 22, 2003 Report Share Posted July 22, 2003 Hi Chris, Yes, the Colt 1928 Navy model was offered with or without a compensator, just as all the Colt models were after 1926. The compensator was introduced in 1926. The model you describe in the 1936 catalogue was not the 1st type 1928 offered. In fact, the 1928 Navy model was introduced with the compensator being "standard." The model was also offered without the compensator as well as the choice of vertical or horizontal fore grip. In reality, most 1928 Navy models sold had compensators and vertical fore grips. The 1928 Navy model without a compensator or having a horizontal fore grip is a actually a pretty rare version of the Colt guns. Go for whatever suits your fancy! Link to comment Share on other sites More sharing options...
Arthur Fliegenheimer Posted July 22, 2003 Report Share Posted July 22, 2003 GiJive, Yah, a Colt 28N without a second type Cutt's and a horizontal grip are rare species. The 28N with comp was the most expensive version of the Colt. Now that the owner of the U.S. Model 1928 West Hurley has patched the underside buttstock sling swivel to suggest the look of a British Lend Lease model, he might as well stick with the military theme Thompson, and retain the West Hurley "Cutt's", and save the $400 for a second pattern original Cutt's. Link to comment Share on other sites More sharing options...
TAB Posted July 22, 2003 Report Share Posted July 22, 2003 There was an article in Thompson Collector news, April 2001 on the sling swivels and vertical foregrips. Online at: http://www.nfatoys.com/tsmg/tcn/default.htm I moved the swivel to the left side on a horiz grip, to the right on a vertical. Found that if the swivel is on the left side and you sling the rifle over a shoulder, the magazine release can foul and drop the magazine. Not an issue if you sling the rifle at the ready... never know when a crazed rock chuck is going to bounce you. Link to comment Share on other sites More sharing options...
TAB Posted July 22, 2003 Report Share Posted July 22, 2003 My stock, bit the worse for wear, a Kahr stock, I used dowels in the plug, and I'm not exactly a polished hand at this. THe dimple at the bottom is Kahr's, they really wanted those sling swivels to stay put. http://wsvl-web1.uwyo.edu/plug.jpg Link to comment Share on other sites More sharing options...
TOMMY SMG Posted July 23, 2003 Report Share Posted July 23, 2003 TAB, It doesn't look to bad, I'll bet if you take it someone like a cabinet maker he could strip-it and make it look like brand-new http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif . Thanks http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif for the tip on the pictures for the sling swivel mounted on the front vertical grip, that's just what I was looking for. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/cool.gif It's been some time since I've read through the T.C.N. (Thompson Collectors News) http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/ohmy.gif , lot of great articles and pictures to look at. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif Jim Link to comment Share on other sites More sharing options...
Waffen Und Bier Posted July 23, 2003 Report Share Posted July 23, 2003 Gleat! Oh thas' gleat! Scene one! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif One day, I WILL find an original British modified vertical grip to go with my original British 1928 buttstock (with the swivel on top). Until then I'll have to make do with a modified horizontal. A buddy loaned me a vertical to use on a show display (but I don't remember if it was real or made up). I have a Canadian proofed M1A1 buttstock (beauty, eh) somewhere around here. I can't remember if it had a top or bottom swivel. I have a colour photo from a British military museum in a book which features a British LL Thompson and the mount on the left side of the vertical grip appears to be inletted. I like the M1 TSMG, I like the 1921, but an unmollested British proof 1928 Savage is my dream Thompson http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/rolleyes.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/tongue.gif Can you spot the Thompson in the photo? http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/dry.gif http://members.aol.com/waffenundbier/Maitland2.jpg Link to comment Share on other sites More sharing options...
TAB Posted July 23, 2003 Report Share Posted July 23, 2003 QUOTE It doesn't look to bad, I'll bet if you take it someone like a cabinet maker he could strip-it and make it look like brand-new And then I'd be afraid of scratching it! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/ohmy.gif I don't remember if you asked, but in wartime photos, the location of the sling swivel (left or right) seems to vary. It might have been that article that suggested that maybe it depended on the handedness of the shooter, but I've an acquaintance that got a boot for shooting left-handed on an exercise. The right hand being the one they were taught. Hence I added my observation about the magazine release fouling when you put the sling swivel on the left. Then again, in training, they took the magazines out generally it seems. Bier und Waffen, nice little collection. I have an original British buttplate on the stock above. LOL. I think what Laidler calls a back alley job. It's a kahr, not a piece of history so I took liberties with what I had on hand so I could add a trap for an oil bottle as well. Hard to display the grenades, but aren't they usually tucked in the pouches, being equal opportunity armament? http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now