Kurtyboy Posted June 13, 2016 Report Share Posted June 13, 2016 (edited) Hi all, I'm looking for another favor please. Could any Lewis Gun owners please help me by taking some photos of the mouthpiece from a few angles including side view? Many thanks,Marcus Edited October 14, 2016 by Kurtyboy Link to comment Share on other sites More sharing options...
Black River Militaria CII Posted June 13, 2016 Report Share Posted June 13, 2016 It would help to know what you are trying to see.......please explain. Link to comment Share on other sites More sharing options...
warren Posted June 13, 2016 Report Share Posted June 13, 2016 I have a spare rad out of the jacket without a barrel in it.A quick sketch with points of where you need the photo's would sure help. Link to comment Share on other sites More sharing options...
DougStump Posted June 13, 2016 Report Share Posted June 13, 2016 I have a PDF that might be helpful. PM me your email address. If you are looking for the cross second the find, I have a short section of radiator that was turned into a paper weight. Link to comment Share on other sites More sharing options...
DougStump Posted June 13, 2016 Report Share Posted June 13, 2016 (edited) #&%@# phone double posted. Edited June 13, 2016 by DougStump Link to comment Share on other sites More sharing options...
DougStump Posted June 13, 2016 Report Share Posted June 13, 2016 I have a PDF that might be helpful. PM me your email address. If you are looking for the cross section of the fins, I have a short section of radiator that was turned into a paper weight. Link to comment Share on other sites More sharing options...
Kurtyboy Posted June 19, 2016 Author Report Share Posted June 19, 2016 It's the front and back cross sections of the radiator I need to see please. Photos taken as straight on as possible. ThanksI have a spare rad out of the jacket without a barrel in it.A quick sketch with points of where you need the photo's would sure help. Link to comment Share on other sites More sharing options...
Kurtyboy Posted June 19, 2016 Author Report Share Posted June 19, 2016 Photos taken in the directions of the arrows please. Front of radiator with no lens distortion (photo taken from 3-4 feet away using zoom), and the upper half of the rear of the radiator that is visible through the back of the shroud. Thanks again.http://i678.photobucket.com/albums/vv142/kurtyboy2/am/radiator%20photos.jpg Link to comment Share on other sites More sharing options...
warren Posted June 24, 2016 Report Share Posted June 24, 2016 tried to take you some pictures but not much luck.This is the best I could do.I'll try with a lamp set up when I have a chance Link to comment Share on other sites More sharing options...
Kurtyboy Posted June 25, 2016 Author Report Share Posted June 25, 2016 Thanks Warren, they do help somewhat together with the diagram from DougSump. All I really need now is a photo looking into the back of the shroud so I can see exactly how much of the radiator is visible. Link to comment Share on other sites More sharing options...
warren Posted July 4, 2016 Report Share Posted July 4, 2016 OK, lets try this again with a different camera and light outside.Just let me know if any of these are OK Link to comment Share on other sites More sharing options...
Kurtyboy Posted October 14, 2016 Author Report Share Posted October 14, 2016 Wow, sorry I missed your last reply Warren - don't recall getting a notification. But your previous photos did help greatly. I'm looking for some pictures of the mouthpiece now if anyone can help please. Link to comment Share on other sites More sharing options...
Kurtyboy Posted October 14, 2016 Author Report Share Posted October 14, 2016 Wow, sorry I missed your last reply Warren - don't recall getting a notification. But your previous photos did help greatly. I'm looking for some pictures of the mouthpiece now if anyone can help please. Link to comment Share on other sites More sharing options...
Kurtyboy Posted May 3, 2017 Author Report Share Posted May 3, 2017 I'm working on the feed arm now and could use a clear perpendicular photo of the whole part if anyone can help, please? I've viewed about every resource available online that I can find but there's very little that can be used as an accurate and complete template. Thanks Link to comment Share on other sites More sharing options...
DougStump Posted May 3, 2017 Report Share Posted May 3, 2017 I dug out one of my spares, I'll email you some photos today. Do you need the whole are, or just what shows with the pan removed? As this is just for show, have you considered 3D printing? Link to comment Share on other sites More sharing options...
Kurtyboy Posted May 3, 2017 Author Report Share Posted May 3, 2017 Thanks Doug, great pictures you sent me. I'm not a big fan of 3D prints, I only use them as a last resort. I will mainly be using laser cut steel plates refined by machining. I think I'm covered now for the arm and pawls now. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now