PK. Posted June 17, 2020 Report Share Posted June 17, 2020 I’m not in the parts business, but when i can’t get what I need I’m forced to make it. About 10 years ago milled grip mounts dried up and I produced a batch, then the Russian cache was discovered and we have been in Thompson parts heaven for a while, but that’s coming to an end and it’s no surprise that milled grip mounts are no longer readily available, so I’ve produced another lot.These are made to the 1920’s prints from the correct carbon steel and properly hardened. They are suitable for live fire applications and not just display purposes, being as good as or better than the GI parts to which we have become accustomed.Price is $67.40 plus $10 for priority mail shipping. 1st class is available upon request at a slightly reduced rate.Cash, check or money order to:Diamond K1390 E. 7th St.Delta, CO 81416p-k at q dot comThanks David for the forum 2 Link to comment Share on other sites More sharing options...
TD. Posted June 18, 2020 Report Share Posted June 18, 2020 If you have a West Hurley submachine gun with the late style riveted grip mount, I suggest you purchase one of PKs reproduction grip mounts as insurance for a future potential need. Original GI milled grip mounts are very difficult to find. I have one spare and have been offered obscene money for it. This product and price from PK is outstanding! Link to comment Share on other sites More sharing options...
Paladin601 Posted June 19, 2020 Report Share Posted June 19, 2020 If you have a West Hurley submachine gun with the late style riveted grip mount, I suggest you purchase one of PKs reproduction grip mounts as insurance for a future potential need. Original GI milled grip mounts are very difficult to find. I have one spare and have been offered obscene money for it. This product and price from PK is outstanding! How Obscene? Link to comment Share on other sites More sharing options...
cbmott Posted June 19, 2020 Report Share Posted June 19, 2020 PK money sent Link to comment Share on other sites More sharing options...
ppgcowboy Posted June 19, 2020 Report Share Posted June 19, 2020 If you have a West Hurley submachine gun with the late style riveted grip mount, I suggest you purchase one of PKs reproduction grip mounts as insurance for a future potential need. Original GI milled grip mounts are very difficult to find. I have one spare and have been offered obscene money for it. This product and price from PK is outstanding! How Obscene?Me too. Link to comment Share on other sites More sharing options...
Burns556 Posted June 19, 2020 Report Share Posted June 19, 2020 Set one aside for me. Check will go out Monday. Link to comment Share on other sites More sharing options...
Gio Posted June 19, 2020 Report Share Posted June 19, 2020 Ill take one. Thanks for making them. Will send check tomorrow Frank Link to comment Share on other sites More sharing options...
cbmott Posted July 2, 2020 Report Share Posted July 2, 2020 Grip mount came in yesterday thanks. Link to comment Share on other sites More sharing options...
PK. Posted July 3, 2020 Author Report Share Posted July 3, 2020 If you are going to post photos, you could have wiped the grease off so the uniform finish was truly represented. 1 Link to comment Share on other sites More sharing options...
Gio Posted July 3, 2020 Report Share Posted July 3, 2020 All though the picture doesnt show that well David will be glad to know that PK put his stamp on this part. PK did a great job as one would expect. Thanks PKFrank Link to comment Share on other sites More sharing options...
cbmott Posted July 3, 2020 Report Share Posted July 3, 2020 (edited) If you are going to post photos, you could have wiped the grease off so the uniform finish was truly represented.You could have been polite in your response but instead you were rude and condescending so here we are. Edited July 4, 2020 by cbmott Link to comment Share on other sites More sharing options...
Rotorhead Posted July 3, 2020 Report Share Posted July 3, 2020 I would like to buy one of your grip mounts if still available. Also do you sell the urethane buffers for a 28 Navy, if so could that be added to the grip mount order? Thanks Link to comment Share on other sites More sharing options...
wv1928 Posted July 4, 2020 Report Share Posted July 4, 2020 I STILL HAVE TWO FROM YOUR FIRST RUN. I GOT THEM FOR " JUST IN CASE ". I COULDN'T TELL THEM APART FROM THE ONE ON MY TOMMY. GUYS, I HAVE GOT TO TELL YOU THAT " PK " KNOWS HIS STUFF. YOU WON'T BE SORRY YOU GOT THESE FROM HIM. SORRY ABOUT THE LARGE PRINT BUT I AM GETTING OLD AND CAN'T SEE THE SMALL PRINT SOMETIMES. I HOPE EVERYONE HAS A GREAT " 4TH " Link to comment Share on other sites More sharing options...
PK. Posted July 4, 2020 Author Report Share Posted July 4, 2020 cbmott; I had no intention to be either rude nor condescending, just factual. I'm truly sorry i did not more clearly present my thoughts. Tact is not known to be one of my finer attributes. :-( Link to comment Share on other sites More sharing options...
glen1005 Posted July 5, 2020 Report Share Posted July 5, 2020 I would like to buy one of your grip mounts if still available. Thanks. Glen Link to comment Share on other sites More sharing options...
Motorcar Posted July 5, 2020 Report Share Posted July 5, 2020 If you are going to post photos, you could have wiped the grease off so the uniform finish was truly represented. I didn't find it rude or condescending, it made me smile...before I read any other posts...knowing the high level of pride and quality Paul puts into his work, that is exactly what I would expect. The work you did for me PK all those years ago still makes it my best of show in the safe. cbmott...relax, it's going to be okay. Link to comment Share on other sites More sharing options...
cbmott Posted July 6, 2020 Report Share Posted July 6, 2020 Motorcar, the comment wasn’t directed at you so it doesn’t really matter what you think. It’s done, chalked up as a misunderstanding before you chimed in. Now on with the show. Link to comment Share on other sites More sharing options...
Motorcar Posted July 6, 2020 Report Share Posted July 6, 2020 Motorcar, the comment wasn’t directed at you so it doesn’t really matter what you think. Then you shouldn't have posted what you did for all to see, it could have been done privately then the misunderstanding cleared up privately. Your are correct, it's done. Link to comment Share on other sites More sharing options...
Old Sensei Posted July 30, 2020 Report Share Posted July 30, 2020 Reserve one for moi. The check will go out tomorrow. Link to comment Share on other sites More sharing options...
Burns556 Posted August 4, 2020 Report Share Posted August 4, 2020 The grip mount in impeccable thank you. I would also like to purchase a urethane buffer if available. What would be the shipped price? Thanks again Link to comment Share on other sites More sharing options...
PK. Posted August 4, 2020 Author Report Share Posted August 4, 2020 1928 buffer discs are $7.50 post paidThanks :-) Link to comment Share on other sites More sharing options...
shooter333 Posted August 8, 2020 Report Share Posted August 8, 2020 Hi PK,I am new to the forum and just got my first 1928A1. I tried to PM you, but I'm not sure it went through. I would like one one your Grip mounts and 2 buffers. Sorry for the repetitive posts if the other comes through.Thanks,Brent FisherFalcon FireworksGuyton, GA Link to comment Share on other sites More sharing options...
45trust4thompson5 Posted August 20, 2020 Report Share Posted August 20, 2020 Thanks for making the grip mounts I'll take one along with 3 1928 buffers. Check will be in the mail today. Greg Link to comment Share on other sites More sharing options...
DFisch Posted September 29, 2020 Report Share Posted September 29, 2020 Sorry I'm so late to the party! Do you still have any grip mounts available? Sorry to disturb the whole forum, but I couldn't find where to PM you. Thanks! Link to comment Share on other sites More sharing options...
PK. Posted September 30, 2020 Author Report Share Posted September 30, 2020 Yes, still available. Contact at: p-k at q.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now