Jump to content

Specifics on toolless takedown


Recommended Posts

Hey guys (and gals?), first post here but I've have been working on my favorite bucket list gun the Thompson. Just had a couple questions on the tool less take down mod I have seen done. First with the dremel did you use a burr type tool or a small sanding drum. Second did you do any kind of work on the inside of the frame behind the fire control group for reassembly? Mine tends to hang up when I go to reassemble it and thus require the dreaded flat head to lift the plunger. Thanks for the help and this forum is awesome.
Link to comment
Share on other sites

I used a Dremel cut-off wheel and files to take the 1/4" off of the mount rails and a round file to kind of ramp the forward part of the slot behind the trigger group in the lower frame. In my post here I have pics but not specific wording detail you can see.

 

http://www.machinegunboards.com/forums/index.php?showtopic=17720&hl=%2B27a1+%2Bremodel

 

Jon

 

Edited by 06AngusSG
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...