gerard Posted June 26, 2020 Report Share Posted June 26, 2020 I would like too trade a SMG Cutts Compensator for a Thompson sling The compesator is in good condition . i live in Holland Link to comment Share on other sites More sharing options...
anjong-ni Posted June 27, 2020 Report Share Posted June 27, 2020 Looks nice.Thanks to the UN-trade-in-arms-treaty, neither one can legally cross the Atlantic. Good luck....Phil Link to comment Share on other sites More sharing options...
HHollow Posted June 27, 2020 Report Share Posted June 27, 2020 I do not agree. A form6 would be granted to import the compensator. And if the stated value were less than $100 a form6 could be skipped. I can not imagine that the state department or the US would fuss over sling? Link to comment Share on other sites More sharing options...
Black River Militaria CII Posted June 27, 2020 Report Share Posted June 27, 2020 (edited) Import is not restricted into the US of such a part as noted above. In reality, most MG parts can be imported with the exception that receivers must be destroyed to import specs and "non-sporting" barrels must also be destroyed, with a closely monitored exception for certain "replacement parts"barrels. The compensator can easily be imported.The draconian restrictions apply to export of MG and MG related parts as far as US regulation, but a sling is not restricted in any way.FWIW Edited June 27, 2020 by Black River Militaria CII Link to comment Share on other sites More sharing options...
HHollow Posted June 27, 2020 Report Share Posted June 27, 2020 Import is not restricted into the US of such a part as noted above. In reality, most MG parts can be imported with the exception that receivers must be destroyed to import specs and "non-sporting" barrels must also be destroyed, with a closely monitored exception for certain "replacement parts"barrels. The compensator can easily be imported.The draconian restrictions apply to export of MG and MG related parts as far as US regulation, but a sling is not restricted in any way.FWIW Is the import of belt feed devices generally allowed just like most other MG parts? I have heard conflicting stories. In Europe the ownership of such a thing is generally not regulated, so far as I can tell. Link to comment Share on other sites More sharing options...
maxfaxdude Posted June 27, 2020 Report Share Posted June 27, 2020 Looks nice.Thanks to the UN-trade-in-arms-treaty, neither one can legally cross the Atlantic. Good luck....Phil^^^^ Not true. ^^^^ U.S. importation for an item like this is completely legal but can take QUITE A WHILE to happen. Like mentioned above, if valued at less than $100, no U.S. importation permit is needed. The ATF Form 6 can be filed electronically and can sometimes be approved in a week or less. Link to comment Share on other sites More sharing options...
john Posted June 28, 2020 Report Share Posted June 28, 2020 I was under the impression that machine gun parts are prohibited but "accessories" were allowed, including mags, drums, slings, etc.But then, I'm not an arms treaty expert, nor do I play one on TV.... Link to comment Share on other sites More sharing options...
anjong-ni Posted June 30, 2020 Report Share Posted June 30, 2020 "Where my K98 stock from Europe went" "Including"...but not limited-to...There's more to it. I guess it was open to...interpretation. Can mere mortals obtain a "Form-6"?....Phil 1.4 Parts and components Under Article 4 of the ATT, States Parties must regulate the export of parts and components that can provide the [capability to assemble] the conventional arms included in the scope of the ATT. The ATT does not provide a definition of parts and components. However, Article 3 of the Firearms Protocol does: “’Parts and components’ shall mean any element or replacement element specifically designed for a firearm and essential to its operation, including a barrel, frame or receiver, slide or cylinder, bolt or breech block, and any device designed or adapted to diminish the sound caused by firing a firearm.” Link to comment Share on other sites More sharing options...
peter kohler Posted July 2, 2020 Report Share Posted July 2, 2020 pm me I have a reproduction sling that I don't use. I get slings and other accessories from overseas all the time. just got an original rear sight for my m1 carbine from france. and ive bought a couple of the front clamps for my m1thompson from Holland. the part name escapes me but it goes around the wood and barrel to take the strain off the grip rest. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now