mp40 Posted October 25, 2003 Report Share Posted October 25, 2003 I was just wondering how many rounds you guys think that you have fired through your pride and joy? http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif I know that some of the questions rate Thompson abuse! but needed to be asked http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif Link to comment Share on other sites More sharing options...
brian Posted October 25, 2003 Report Share Posted October 25, 2003 in the 4 or so months that i had it, AND it was working. right around 1000rds. pk has it now. Link to comment Share on other sites More sharing options...
full auto 45 Posted October 25, 2003 Report Share Posted October 25, 2003 I would have to say I have put over 10,000 rounds through my gun. Hell the first time I ran it, I was it's first, I put over 1000 rounds through it. It's always nice to be the first. Hell last week-end I put right at 1000 rounds through my 1928 and M1. After all those damn pumpkins kept on charging over the hill! Link to comment Share on other sites More sharing options...
jfcastro Posted October 26, 2003 Report Share Posted October 26, 2003 About 200 rounds give or take. I used to use reloads with round head lead bullets and, as a consequence, has serious leading problems in the barrel. I shifted to FMJ heads which made the cost of the rounds quite expensive and is the reason why I don't shoot my gun so much. Link to comment Share on other sites More sharing options...
John Jr Posted October 26, 2003 Report Share Posted October 26, 2003 Round about 5K. Put 600 thru the Browning today too. That thing eats ammo! Link to comment Share on other sites More sharing options...
Chopper28 Posted October 26, 2003 Report Share Posted October 26, 2003 12-15k in 24 years. Can afford to shoot it more now an will be. Link to comment Share on other sites More sharing options...
SecondAmend Posted October 26, 2003 Report Share Posted October 26, 2003 An interesting question. As others have noted, MG shooting is expensive. I only use American factory-made ammo. I want to be able to sue someone real if I get a squib load that ruins the gun. As a result it costs about $2.58/second of air time to run the '28A1 I acquired in July. I've put about 1500 rounds through it in four shooting sessions. I expect in about five years the value of the gun will have crept up to the point where I'll consider it too valuable to risk breaking. Shooting will greatly diminish then. I could be wrong but I don't think too many minty '21's are shot very much any more. Sort of like the '65 Corvette my brother bought in the early '80s and quit driving in the late '80s, then sold in the early '90s because it was too risky to take out on the road. Link to comment Share on other sites More sharing options...
JimFromFL Posted October 26, 2003 Report Share Posted October 26, 2003 Not sure how many but enough to have to replace the barrel as the barrel bent to where shots were shooting high and to the left. Link to comment Share on other sites More sharing options...
Chopper28 Posted October 26, 2003 Report Share Posted October 26, 2003 The day my TSMG becomes to valuable to shoot will be the day they put me in the ground. It is a gun,it was made for shooting. It has no other use. I bought it to have fun with not to sit and look at. If you want an investment buy stocks, bonds, gold, diamonds or some other intangible items. TSMG's are machined out of solid steel with early twentith century technology. They were built to last and have held up amazing well. If a part breaks or wears out so what. Replace it and roll on. What fun is there in putting them away in a safe. That is like having a super model for a wife and not being able to touch her. TSMG's are hungry beast, they like ammo. I say feed them! Just mt .02 Link to comment Share on other sites More sharing options...
hawksnest Posted October 26, 2003 Report Share Posted October 26, 2003 What good is a corvette if you can't drive it? http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/unsure.gif I bought my thompsons to shoot! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/cool.gif Link to comment Share on other sites More sharing options...
Glen Whittenberger Posted October 26, 2003 Report Share Posted October 26, 2003 207,250 since 1983 in a West Hurley ( and still running ). Approx 9 barrels both GI and aftermarket. Link to comment Share on other sites More sharing options...
1919A6 Posted October 27, 2003 Report Share Posted October 27, 2003 Got two Colt Thompsons. The 21 from J. Curtis Earl shows lot of hard ball wear in the barrel. The 21/28 Navy sharp clear rifling. Only shoot Round Nose Oregon Trail Laser Cast bullets that I reload on my 650 Dillion. Lead in Cutts Comp. but it comes right out with extra large dental tools bought at a gun show. As far as shooting them - As long as the "Colt" doesnot wear off, don't think they will lose any value and I only got them in 1998. Same goes with the Ithaca M3A1, the IMI Uzi and Mini Uzi, the RAMO M1919A6 in 30-06. Link to comment Share on other sites More sharing options...
must Posted October 27, 2003 Report Share Posted October 27, 2003 As far as using the Thompson is concern, I equate it to my 641/2 mustang I drive everyday to work. It would just kill me to look at it in the garage & not drive it. I've been driving it for 22+ years now & I have a ton of spare parts on hand to fix it with (thats why I'm not afraid to drive it). Even tho I shoot a PK improved West Hurley M1 Thompson, I have managed to squirrel away alot of parts to fix it also ( I intend to shoot it alot). By the way, thats where my handle on this board comes from is my car! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif Link to comment Share on other sites More sharing options...
john Posted October 27, 2003 Report Share Posted October 27, 2003 About 2K per year through my A.O.'28 Bridgeport......and I've owned it for about 5 years. I just don't let it get too hot. Barrel rifling still looks great. There is a bit of bare (shiney) inside the receiver....I suppose I should get it reparked to minimize the wear..... I bought it to shoot and shoot it I must!! john Link to comment Share on other sites More sharing options...
DaveNH Posted October 27, 2003 Report Share Posted October 27, 2003 Yup, bought mine to shoot it. I usually go through about 500 rounds every time i take it to the range. I keep having to buy more cases of S&B, the stack in the garage keeps getting shorter, i just don't understand it. I have a West Hurley that was built/rebuilt (?) by a gunsmith in CT. I don't know his name as i bought the Thompson from the original CT owner two or three years ago. The gun is an M1A1 that is really neat with lots of customizations: - removeable front grip hanger - easily removeable barrel (the screw that holds the front grip hanger unscrews and free's up the barrel to unscrew) - cut for a drum - removeable 28 stock - both front grips - lyman type rear sight that screws on - finned barrel with cutts compensator - several extra barrels The finish is a deep chocolate black, an incrediblly smooth finish, looks painted, but it's not. It came with 30 seymour 30rnd magazines, a drum, and a bunch of spare parts, stocks, and barrels. I usually use the drum and 5 or so magazines when i go out and shoot. Not bad for $5500.. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif My only complaint is that the rear sight keeps unscrewing and i have to keep an alan wrench with me to tighten it after every few magazines. I've tried locktight, but it won't hold it. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/sad.gif These might work if you have the right codec on your system. http://www.mv.com/ipusers/tmfeng/SIGforum/....50Rnds.dvd.mpg http://www.mv.com/ipusers/tmfeng/SIGforum/DaveNH.2.mpg Link to comment Share on other sites More sharing options...
Bisley45 Posted October 28, 2003 Report Share Posted October 28, 2003 around 25,000 rnds threw my uncles M1A1/M1 Tommy in the last 18 years, I remember four or five duds and one partial case seperation that prompted me to buy him an M1 bolt. Don't remember any jambs, a couple of times the bolt closed on an empty chamber but the most common stopage is running out of ammo. Still has GI barrel, not much for rifling, but shoots strait enough to hit hedge ball at aprox 25yards on semi. BB Link to comment Share on other sites More sharing options...
LIONHART Posted October 29, 2003 Report Share Posted October 29, 2003 Hell, if I had a Colt '21 I'd shoot it A LOT!Though many folks who buy those don't, and keep them for investments. That's sort of like marrying a Virgin, and wanting to keep her that way! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif Link to comment Share on other sites More sharing options...
Jay Baker Posted October 29, 2003 Report Share Posted October 29, 2003 Since May 2000, when I got the '28, I bet I have yet to break 1500 rounds. Love to shoot it more, just never seem to have the time to go. I'm going to have to change my ways! Link to comment Share on other sites More sharing options...
JimFromFL Posted October 30, 2003 Report Share Posted October 30, 2003 QUOTE (LIONHART @ Oct 29 2003, 05:24 PM) Hell, if I had a Colt '21 I'd shoot it A LOT!Though many folks who buy those don't, and keep them for investments. That's sort of like marrying a Virgin, and wanting to keep her that way! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif The reason for not wanting a virgin for either my wife or my Thompson is because I already planned on having plenty of fun with both. The fact I already replaced the barrel and a few other parts on the Thompson sort of shows which one actually gets more use;-) Link to comment Share on other sites More sharing options...
Arthur Fliegenheimer Posted October 30, 2003 Report Share Posted October 30, 2003 A women is like a new Steinway Piano, the more you use it, the better it sounds. Comparing virigin super models to Colt TSMG's seems odd since a TSMG is not going to learn anything new from repeated use. The idea that people buy Colt TSMG's for investment only applies to those Colt's which have not been abused for the last 80 years. There is no downside to continuously firing rounds through a 50% Colt TSMG. Why one would take one of the last remaining 95% - 98% Colt TSMG and run the actuator till the top of the receiver looks like pot metal is just bizaar, if not a sign of sheer dunderheadedness. Considering the surplus of Savage and West Hurley TSMG's and their parts, why would someone feel compelled to resort to firing 1000's of rounds through such a firearm? This reminds of a fellow on the net who recounted how he substituted just about every part on his Colt TSMG for G.I. parts (including barrel, bolt, actuator, wood, and a Savage frame) before taking it to the range. Now that seemed strange since the only thing left that was Colt, and totally irreplaceable, was the receiver. For all these swap outs, he might as well have been firing a Savage or West Hurley TSMG. Link to comment Share on other sites More sharing options...
michael Posted October 30, 2003 Report Share Posted October 30, 2003 I agree the previous post. There are a finite number of these guns around esp. the colt guns. If there are a few left out there that are in premium condition it is because of the fact that they were not used much in the first place. It's funny, everyone seems to want that pristine piece but not the discipline to keep it that way. I feel the one I have should be enjoyed but with care so I can pass it along in the family. This is important in all machine guns, as no more will be added to the registry. What we have is it... Link to comment Share on other sites More sharing options...
prairiefire Posted November 12, 2003 Report Share Posted November 12, 2003 in the 1 1/2 mos. i've had my 1928a1, some 3000 rds of 230 grn. LRN reloads under 4.8 grns of V-V N320. Goes 890 fps ave. I know, I know. Spare parts for thompsons in the Philippines are practically zilch, but I CAN'T STOP SHOOTING IT! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/tongue.gif Link to comment Share on other sites More sharing options...
SecondAmend Posted November 12, 2003 Report Share Posted November 12, 2003 The biggest problem I have is finding a place to shoot. Only one indoor range in my area will let me fire full-auto, and that range is over 15 miles from my work or my house. My other choice is to drive 150 miles to my brother's farm. If I had convenient access to open shooting, the ammo bill would be way higher. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now