Jump to content

Recommended Posts

Hi Grauwolf,

 

You are in luck. If you want a new made booster, one of our members has just run off a batch. I'd get two! Wait, I did!

 

Enjoy,

 

Grasshopper

 

Follow the link: https://adcofirearms.com/shop/manufacturer/adco/booster-test-post/

Edited by Grasshopper
Link to comment
Share on other sites

There is no such thing as an MG08 bolt.

Im not too sure what else to call it. I know its not a bolt in the traditional sense but thats all Ive seen it called.

 

Edit: would it be called a lock?

Edited by grauwolf
Link to comment
Share on other sites

I'm looking for:

A feed pawl

A working lock

and a booster.

 

 

thanks in advance!

 

 

I have some reproduction feed arms, if you are interested please email me at PMM1910@gmail.com.

MG08c.jpg

MG08d.jpg

Link to comment
Share on other sites

The OP is most likely looking for the lower feed arm, not a " feed pawl". Since he is learning the nomenclature, I suspect he might be confusing the two and his feedblock has a broken feed arm, which is so common.

But, maybe his feed pawls are missing in the shuttle or the lower ones are gone.........

I have never heard of new made feed pawls but again, maybe someone is making them....

Just sayin'.....

Link to comment
Share on other sites

How about springs for the feed block, for the feed pawls? Is anybody making those?

 

Also Black River Militaria fixed my lower feed arm, ask him if he can fix it.

 

The OP is most likely looking for the lower feed arm, not a " feed pawl". Since he is learning the nomenclature, I suspect he might be confusing the two and his feedblock has a broken feed arm, which is so common.

But, maybe his feed pawls are missing in the shuttle or the lower ones are gone.........

I have never heard of new made feed pawls but again, maybe someone is making them....

Just sayin'.....

Edited by jamesbucklin
Link to comment
Share on other sites

The OP is most likely looking for the lower feed arm, not a " feed pawl". Since he is learning the nomenclature, I suspect he might be confusing the two and his feedblock has a broken feed arm, which is so common.

But, maybe his feed pawls are missing in the shuttle or the lower ones are gone.........

I have never heard of new made feed pawls but again, maybe someone is making them....

Just sayin'.....

Yea the lower arm of the pawl looks like it was cut off at one point, figured Id need to replace the entire pawl itself.

 

Im extremely new to all this so the nomenclature is very foreign to me.

Link to comment
Share on other sites

To clarify for myself, I need only the "feed slide pawl spring", see attached pic, spring circled in red. Can I just pull this out, bend it farther apart to make it work? Or do they need to be heat treated to work right? Thanks for any info.

post-1716-0-26597200-1591238920_thumb.jpeg

Link to comment
Share on other sites

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...