DougStump Posted March 23, 2019 Report Share Posted March 23, 2019 I learned this trick a long time ago in a galaxy far, far away from an old silversmith. Recording faint stamped or engraved markings can sometimes be a problem. Plain photography usually isn't satisfactory, and filling the markings with paint isn't always desirable. Here's a quick harmless way to do it. This method will sometimes reveal markings too faint for the naked eye. And you will have an image for your permanent records. 1. Clean the markings with a solvent (denatured alcohol) and an old toothbrush. You need to get all the dirt & gunk out of the markings.2. Light a plain old wax candle. Play the flame over the markings until they are completely covered with black soot.3. Take a piece of "Magic" or "Invisible" tape and carefully place it over the markings. Note that it will not stick to the soot and may try to slide. If it does, go back to step 2.4. Gently press & rub the tape over the markings. A Q-tip works great.5. Carefully pull the tape off and stick it on a white card or paper.6. Clean and OIL the firearm! Give it a try. Class dismissed. Link to comment Share on other sites More sharing options...
RoscoeTurner Posted March 23, 2019 Report Share Posted March 23, 2019 Will have to give that a try. Use a chalk pencil to fill these markings on a MG08 barrel yesterday for a little photo work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now