Jump to content

My new 50rd drum(info needed)


Recommended Posts

Hi guys. Finally got my hands on a 50round drum for my 28. To be 100% honest I dont now too much on these so would appreciate anyones input.Ive spent a bit of time doing some research but that made it more confusing!! My main question is what date would you think it was made? I was told wartime but hey... you cant believe everything your told. Sorry about the cosmiline. I havnt gotten around to giving it a clean up yet. Thank you in advance

post-260119-0-82533900-1541406524_thumb.jpeg

post-260119-0-23306700-1541406572_thumb.jpeg

post-260119-0-89807900-1541406699_thumb.jpeg

post-260119-0-22400000-1541406778_thumb.jpeg

post-260119-0-18960900-1541406884_thumb.jpeg

post-260119-0-73151300-1541406939_thumb.jpeg

Link to comment
Share on other sites

I believe this model drum is often referred to as the "Bridgeport drum" that was manufactured by United Specialties Company during World War II. Note the "U" marking on the drum body and cover. There were several variations during the production run. I do not see the Thompson bullet trademark on your cover. Roger may chime in with more information.

 

These are very hardy drums and should provide you a lifetime of use!

Link to comment
Share on other sites

The good news is you have an original drum. Few or no drums were manufactured in 1942 since the M1 TSMG and 30 rd. magazines were already in the works. Yours most likely made in 1940 or '41. I've seen no precise records.

Link to comment
Share on other sites

Andrew11,

 

Your drum appears to be a third generation United Specialties which, as others have mentioned, is typically referred to as a Bridgeport drum. This assumes that it does not have Thompson bullet logo on the front above the WIND TO 9 OR 11 CLICKS (hard to confirm from your pics). GIJives timeframe is correct.

 

Roger

Link to comment
Share on other sites

Hi Guys. once again this forum and its members have provided me with great information . Thanks to all that have commented. Very happy knowing this is a war time drum. It had taken me a while to find one here where I am. TSMG28 you are correct. There is no Thompson bullet logo on this drum. I assume that there wasn't much difference from 1st gen to 3rd gen?

Link to comment
Share on other sites

Ditto on the pinned section which explains the different models. I've got two similar ones. Yours looks pretty nice IMO. Needs cleaning up on the inside.

 

You're going to really like it when you clean it up and fire 50 rounds through it.

 

Robert

Link to comment
Share on other sites

Most common ww2 drum

 

Ive got 2. Found one brand new condition for $450 a while back

 

 

They sell for $400-450 in excellent condition

 

Now find the other makers. Much harder to find

 

Cool item to own. Enjoy shooting it

Edited by huggytree
Link to comment
Share on other sites

Andrew,

 

Not much difference between V1 and V3 in quality, but the markings are different. The V1 drum has the New York address on the body faceplate like the previous drums from Worcester Pressed Steel. Both V1 and V2 have WIND TO 9 CLICKS on the cover instead of WIND TO 9 OR 11 CLICKS, and their cover faceplates have individual winding instructions for the 1921 and 1928 guns.

 

You found a really nice drum that should be highly reliable once you clean it up.

 

Roger

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...