3 replies to this topic

[Dp28]

I've got a mg34 semi auto that has a serial number
Looks like a tnw from bottom but does not have the serial.
The front 2 inches was missing so I found one from a cut 34 and had lewman arms assemble it.
Problem is that the back portion
1 lacks an ejection port cover hole
2 the barrel in her hole is drilled for the big part of the plunger but not the smaller part that slides into the spring.
I can't use it as is
Who can i send it to to do the machine work

[Dp28]

Inner hole* not in her hole

[Ryo]

2 the barrel in her hole is drilled for the big part of the plunger but not the smaller part that slides into the spring.

Had a good laugh..

 

So your trying to modify the TNW to accept a ejector cover?  Any reason why?

Mine (real MG34, mismatch S/N) broke the ejection cover spring, hence it stays open rather than closed.

As for the S/N it's on the ring near the stock attachment. (or at least it was for me.  Pain to find due to all the mismatch parts)

[peter kohler]

my mg34 ejection cover door stays open