M65 Rear Sight
Posted 05 November 2018 - 11:23 AM
Posted 05 November 2018 - 02:22 PM
Pop the guts out of the back of the receiver and bore sight it?
Posted 05 November 2018 - 05:49 PM
Shoot it at 25 yards first, you will likely be on paper at 25 yards.
Posted 08 November 2018 - 07:07 AM
The rear sight is set right in the middle for elevation, I dont know what kind of range that sets me up for?
Edited by Kilroy, 08 November 2018 - 07:07 AM.
Posted 08 November 2018 - 12:15 PM
Just pick out a rock or dirt clod at 50yds with a lot of space around it . Shoot from the bench with a rest . Should take less than a mag to get close / on . Then switch to the paper to fine tune .
Posted 09 November 2018 - 11:30 AM
Edited by doc280, 09 November 2018 - 01:09 PM.
Posted 30 November 2018 - 10:32 AM
These are my rifle settings.
For what range?
Posted 30 November 2018 - 11:16 AM
This is actualy very little help .
You can loosen the two screws and move the plate quite a bit .
The object is to look at the ballistic chart for the round you are using , then sight it in where you want , then set the plate to zero , then adjust your # of minutes from there to the distance you're shooting at ( different from your sight in range ) .
Posted 01 December 2018 - 07:18 AM