Kahr Semi M1 Sbr Is Here
Posted 12 January 2005 - 07:44 PM
Any suggestions for any parts I might swap out to get it running the best or should I just take it out and give it a try first? Experiences, comments?
On a more exciting front the Form 4 for my full-auto M1919A4 Saginaw should be coming in soon! Boo-ya! And this one will be the real deal (or really close to it.)
Posted 12 January 2005 - 08:40 PM
The ammo lasts a little longer.
You might seriously consider swapping out the mag catch for one that is already modified or doing the mods yourself. See the FAQ section, on the how to.
Feeding seems to be one of the real bugs, and that little change makes quite a difference. Then you can buy GI mags at a lower cost than the modified ones that Kahr sells.
Posted 12 January 2005 - 11:58 PM
|Kahr supposedly produced one for me then backed out and said that one didn't meet their quality control|
Oh lord...even if I can get by the Oxymoron of Kahr Quality Control, how bad must that gun have been to not meet their standards....
Seriously... I hope it's a great gun and you have many years enjoying it..
Posted 13 January 2005 - 02:31 AM
Congrats! I've seen the ads for Kahr's SBR but never heard from anyone who has one. Can you post some pics or comment on fit and finish? Thought about buying a Kahr SBR a while back but ended up coming across a WH M1 at a good price so I did the form 1 SBR route on that one instead.
Regarding shooting it, if it were me I'd go out and blast away! Wouldn't personally see any reason to change parts unless it doesn't run. Have fun, and by all means, keep us posted.
Posted 14 January 2005 - 11:16 AM
|QUOTE (marks @ Jan 13 2005, 02:31 AM)|
Congrats! I've seen the ads for Kahr's SBR but never heard from anyone who has one. Can you post some pics or comment on fit and finish?
Sure I'll post some pics etc. Funny thing is, it's supposed to be the M1 but they shipped it with the vertical forgrip!??! Man, those guys weren't paying attention. Hope that doesn't speak to the guts of it. Horizontal foregrip is in the mail to me, though.
Amazingly enough, the fit and finish seems to be really nice! I'm pretty impressed by it. Even my Class III dealer thought it was nice (and he has a lot of cool stuff.) Laid it next to the real deal and, apart from some minor contours, it's pretty damn close. Oh yeah, people weren't kidding when they said those springs are strong! Sheesh.
Since I have a bunch of different types of .45 laying around I'll make a note of what seems to run the best. Heck, I can polish a feed ramp if I need to.
Posted 14 January 2005 - 11:27 AM
Posted 14 January 2005 - 12:04 PM
A Dave Janowski spring and buffer kit will solve the hard spring tention problem.
For about $50, it's worth it!
Installs in seconds with no modification to the gun.
Posted 15 January 2005 - 03:45 PM
|QUOTE (marks @ Jan 13 2005, 02:31 AM)|
|Can you post some pics or comment on fit and finish?|
Posted a couple of pretty large pictures on my basement FTP site. Both are close to 2 megs so dialup users might have a wait! Of course, wrong forestock.
Here ya go: ftp://tommygun:kahrSBR04@220.127.116.11
Posted 15 January 2005 - 05:17 PM
|QUOTE (LIONHART @ Jan 15 2005, 04:25 PM)|
|I don't see anything.....|
Web browsers can be flaky with FTP sometimes. You can go to www.net2ftp.com and use their browser-based FTP interface and it seems to work fine.
let me know
Posted 16 January 2005 - 12:34 AM
Posted 16 January 2005 - 06:43 PM
Now, the bad. Rear site worked all 4 of its screws loose and I lost one. Front sight has now rotated about 4 or 5 degrees to the right (it's in with a hexhead screw I think) and the bar that extends out of the safety actually fell out!
Looks like I have some feedback to Kahr but my worst fears did not come true. I have no problem in chambering, firing, and extracting now and that's all that really worried me after hearing the horror stories. Seems like the other problems are cosmetic and the guys doing the final build just aren't paying attention.
All in all, for less than 1/10th the price of the real deal, I got a damn fun little Thompson! I feel sorry for my wife, though. This one experience has made up my mind. I must have the real one someday. I've got the disease!
Posted 17 January 2005 - 02:38 AM
I had to laugh a little bit (not at your expense) but your notes about the sights coming loose and a screw going away reminded me of an outing with an AM180 I use to have where I was always 'fixing' something. One day after dealing with repeated jams I removed the drum and the feed block just fell off. The look on my face was apparently priceless. Now when equiptment breaks down due to 'use' it's affectionately referred to (by shooting buds and I) as "the wheels are coming off" time to put it away.
Posted 18 January 2005 - 01:18 PM
|QUOTE (marks @ Jan 17 2005, 02:38 AM)|
|I had to laugh a little bit (not at your expense) but your notes about the sights coming loose and a screw going away reminded me of an outing with an AM180 I use to have where I was always 'fixing' something. One day after dealing with repeated jams I removed the drum and the feed block just fell off. The look on my face was apparently priceless. Now when equiptment breaks down due to 'use' it's affectionately referred to (by shooting buds and I) as "the wheels are coming off" time to put it away.|
Ha! I had a similar day with an M1 carbine. Stupid gas system just wasn't putting out the power. Failure to feed, partial feeds, failure to extract, etc. So frustrating as I was trying educate my buddies on WWII weapons. Of course, then I broke an extractor! Time to put it away, smile, and thank the man above that I was just firing at the range and no one was shooting back!
Posted 18 January 2005 - 08:13 PM
Wanna suggestion? Send it back... if you had paid $1552.00 (1352.00 MSRP +200.00 Stamp)for a rifle by a reputable gunmaker like this Kimber (selling on GunsAmerica for 1699.00) and the rear sights fell apart , and the front sight rotated, and part of the safety fell off and it wouldn't function properly, would you take it to another individual to make it work right????? Would you say it's a Fun Little Kimber? No.. We would be swept away by the speed of the truck taking it back.
That's my suggestion..
Posted 18 January 2005 - 09:45 PM
I can understand that..I've done that too, and it's cost me nothing more than $$$.
Learning from my past mistakes, I'd send it back to Karh. Have them make it right!
All this talk about Karh Quality has really gotten me angry. WH produced Junk, and now Karh is carrying on their old tradition. I think we should ALL email them a Nasty Gram. Let's tell them what WE really think! I intend to do just that. Enough of this Horse Shit...
There is absolutely NO excuse in this day and age for producing bad Drums and Guns. Hell Man, look at the Original Colt "L" Drums of yesteryear? With the Modern Equipment available today, one would think a superior product could be produced, but that's not the case with Kahr. They are bent on manufacturing pieces of shit, and will continue to do so.
Unless we make OUR voices heard, Kahr isn't going to change a damn thing.
Posted 19 January 2005 - 02:04 AM
Posted 19 January 2005 - 02:15 AM
Posted 19 January 2005 - 05:48 AM
You hit the nail on the head!
Its not only in guns but in just about everything, the way of the world if you will. Make it, make it quick, and turn a profit. The days of the craftsman are pretty much gone.
Sure there are a few artisans left, but at a premium.
I sold pet supplies for 28 years, and saw many products that should have never left the draftsman's table
Yes, I own a Kahr 27, and it at one time did suffer the same problems. I remember how my heart sank when after 3 rounds it jammed. Had the same problems with several Colts!
Union labor, and the fact that no one cares anymore. Get it made, and get the check.
I also agree that at almost 1k they should function out of box.
The Kahr, and Colts all work great now, but for an additional premium.
I reality it not just Kahr, its life in general.
Some of Colt's pistols have plastic triggers.
I wonder if HK would be interested in manufacturing Thompson's? Bet the price would double!
Posted 19 January 2005 - 03:28 PM
|I wonder if HK would be interested in manufacturing Thompson's? Bet the price would double!|
IF HK produced these, they would be twice as much, and would be WORTH every penny at that! All a Kahr Semi is, is an OVERPRICED Jenning's
|May heaven bless your silver tongue, Mr. Lionhart. Whatever can be the reason why so many give so much slack to Kahr? Do their products give off fumes that soften the brain and impair logic, or what?|
Well hell Phil, like I said. We ALL need to get involved and make damn sure Kahr turns their operation around for the better. If not, nothing will ever change. Fumes? HA! Perhaps they do. As far as my Silver Tongue. I do what I can..