StrangeRanger Posted February 4, 2020 Report Share Posted February 4, 2020 (edited) Please add me to the list as well Are there drawings of a Reising mag that would allow a similar tool to be made for them? Edited February 4, 2020 by StrangeRanger Link to comment Share on other sites More sharing options...
nate129 Posted February 10, 2020 Report Share Posted February 10, 2020 Interested in one as well. Thank you for taking the time to develop this tool. Link to comment Share on other sites More sharing options...
coastie70 Posted February 10, 2020 Report Share Posted February 10, 2020 Please add me to the list for one Link to comment Share on other sites More sharing options...
CaribRadDoc Posted February 13, 2020 Report Share Posted February 13, 2020 Please put me in for one, as well. Thanks! Link to comment Share on other sites More sharing options...
Tiz Posted February 14, 2020 Author Report Share Posted February 14, 2020 I am keeping a running list. At present I have completed a few and am sending one to one of the board members for evaluation and feed back. I will keep everyone apprised. I am truly grateful for all the interest and am hoping the tool meets the expectations of the board member who will be testing it. Link to comment Share on other sites More sharing options...
kck8385 Posted February 15, 2020 Report Share Posted February 15, 2020 I will take one also. Kevin Link to comment Share on other sites More sharing options...
Tiz Posted February 16, 2020 Author Report Share Posted February 16, 2020 I will take one also. KevinYour on the list and thanks for your interest. Link to comment Share on other sites More sharing options...
Autorotate Posted February 19, 2020 Report Share Posted February 19, 2020 Thanks for your handiwork and taking up this project Tiz! Link to comment Share on other sites More sharing options...
Tiz Posted February 19, 2020 Author Report Share Posted February 19, 2020 I have completed a few so far. Unfortunately I ran out of the steel which I had on hand. I had not planed any production or anticipated such a positive response to my project. I did place an order for additional materials last week and expect delivery shortly and again begin fabrication, each one is hand made. So far I have about 30 members interested. These things are heavy so the price is going to be $115.00, each shipping included via USPS. If anyone who is on the list is no longer interested please let me know so I can move other orders up.Thanks for your interest. Link to comment Share on other sites More sharing options...
Tiz Posted February 24, 2020 Author Report Share Posted February 24, 2020 I will be picking up an order of steel tomorrow and I will then be able to resume making the feed lip repair tools. Thanks to all who have expressed an interest. I have you on the list. Link to comment Share on other sites More sharing options...
Autorotate Posted February 24, 2020 Report Share Posted February 24, 2020 Don’t forget to put a cool logo or at least your name or initials or the finished product...kinda like the old Diamond PK logo. A man with talent has to sign his workmanship! Link to comment Share on other sites More sharing options...
Tiz Posted February 24, 2020 Author Report Share Posted February 24, 2020 I am doing that. It is “ 5 & 10” and a serial number on each as they are shipped. I kept serial number 1 for myself. Link to comment Share on other sites More sharing options...
Autorotate Posted February 24, 2020 Report Share Posted February 24, 2020 Not sure where I am on the list, but would like to request either #15 or #45... Thanks again for taking the effort to manufacture these tools. Link to comment Share on other sites More sharing options...
ppgcowboy Posted February 24, 2020 Report Share Posted February 24, 2020 I want pi! Link to comment Share on other sites More sharing options...
Tiz Posted February 24, 2020 Author Report Share Posted February 24, 2020 Not sure where I am on the list, but would like to request either #15 or #45... Thanks again for taking the effort to manufacture these tools. #15 it is and thanks Link to comment Share on other sites More sharing options...
2t2 Posted February 24, 2020 Report Share Posted February 24, 2020 Not sure if I got on the list, but I will take one.Let me know how much and where to send the funds.Thanks,Tom Link to comment Share on other sites More sharing options...
2ndArmored Posted February 25, 2020 Report Share Posted February 25, 2020 I want pi! You'll have to wait till he gets around to it. 1 Link to comment Share on other sites More sharing options...
Tiz Posted February 25, 2020 Author Report Share Posted February 25, 2020 I want pi! You'll have to wait till he gets around to it.I am doing my best but is a slow process and when I ran out of material the process stopped all together and of course life always seems to throw a few curves. Rest assured I am working on them. Link to comment Share on other sites More sharing options...
GaryKeim Posted February 25, 2020 Report Share Posted February 25, 2020 I want pi! You'll have to wait till he gets around to it. Nice one. Link to comment Share on other sites More sharing options...
Tiz Posted February 26, 2020 Author Report Share Posted February 26, 2020 Not sure if I got on the list, but I will take one.Let me know how much and where to send the funds.Thanks,Tom2t2. you are high on the list. Thanks Link to comment Share on other sites More sharing options...
LSU Tiger Posted February 27, 2020 Report Share Posted February 27, 2020 I was Tiz's "tester" for this project. Mag #1 simply had the feed lips out of adjustment. No sweat. Remove the floor plate, spring, and follower and insert the tool and clamp into a vise. The 5/16" bolt does need clearance between the ends of the mag body under the back of the magazine. I used two numbered drill bits to open it up. I was done with that mag in maybe five minutes, tops. Mag #2 was dented on the right side and just below where the follower trips the mechanism to lock the bolt open. The tab on the rear of the follower was bent too. With the help of the tool, the dent on the side came out easily with the help of a nylon padded hammer. The feed lips were way out of alignment. I used a 4 oz ball peen hammer to tap them into the proper position. The last dent was a challenge, but the tool helped there as well. All in all, I think he did a great job with it and it's well worth the money. Link to comment Share on other sites More sharing options...
Gio Posted February 27, 2020 Report Share Posted February 27, 2020 Im glad it worked up to expectations. Look forward to getting mine. Frank Link to comment Share on other sites More sharing options...
Tiz Posted February 27, 2020 Author Report Share Posted February 27, 2020 As the Mag Feed Lip Repair Tools are completed I am contacting board members via PM in the order in which they posted their interest in purchasing a tool. If you expressed an interest please keep an eye on your PM. If you are no longer interested please let me know as well so I can update the list. Thanks to all for your interest. The list is still open if you would like one and are not on the current list. Price is $115.00 each and includes shipping. Link to comment Share on other sites More sharing options...
2ndArmored Posted February 28, 2020 Report Share Posted February 28, 2020 I want pi! You'll have to wait till he gets around to it.I am doing my best but is a slow process and when I ran out of material the process stopped all together and of course life always seems to throw a few curves. Rest assured I am working on them. Tiz;My reply was meant only as a mathematical pun, not an objection to your pace of production. ~ Lost in translation Link to comment Share on other sites More sharing options...
Tiz Posted February 28, 2020 Author Report Share Posted February 28, 2020 I want pi! You'll have to wait till he gets around to it.I am doing my best but is a slow process and when I ran out of material the process stopped all together and of course life always seems to throw a few curves. Rest assured I am working on them. Tiz;My reply was meant only as a mathematical pun, not an objection to your pace of production. ~ Lost in translationSorry that I didn't pick up on that. I thought you were a little upset with my progress. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now