Jump to content


Photo

Has anyone ever gotten an ATF exemption for an AOW


  • Please log in to reply
11 replies to this topic

#1 bmarvin

bmarvin

    RKI Member

  • Board Benefactor
  • 732 posts
  • Gender:Male

Posted 19 September 2019 - 10:01 AM

I may have  a chance of buying a fairly rare C&R AOW. It isn't registered. It's twin is on the ATF exempt list (listed by serial number). This one is 4 digits off. I can break down the  gun and keep the parts and different locations so I'm in compliance but I'd rather have it together.

Has anyone petitioned the ATF and gotten an exemption?

I assume I'd send photos and the reason why to tech branch?

 

Thanks

Brian


  • 0

#2 bmarvin

bmarvin

    RKI Member

  • Board Benefactor
  • 732 posts
  • Gender:Male

Posted 19 September 2019 - 01:29 PM

Here's  a fairly typical Auto and Burglar Model B that was exempted from the NFA in 2013.

https://stevebarnett...m-batf-20-gauge


  • 0

#3 Bill DeShivs

Bill DeShivs

    Member

  • Regular Group
  • 34 posts

Posted 19 September 2019 - 03:08 PM

I believe you have to send the weapon to ATF, not pictures.


  • 0

#4 bmarvin

bmarvin

    RKI Member

  • Board Benefactor
  • 732 posts
  • Gender:Male

Posted 19 September 2019 - 03:50 PM

I believe you have to send the weapon to ATF, not pictures.

That would be quite the risk that you'd ever get the gun back


  • 0

#5 johnsonlmg41

johnsonlmg41

    Respected Member

  • Board Benefactor
  • 812 posts
  • Gender:Male

Posted 19 September 2019 - 08:55 PM

I would send a letter referencing the letter in the link you posted, stating that you have the opportunity to purchase an essentially identical firearm and ask that all of them be removed from the NFA as a "class" and see what happens with that before you do anything else.   A lot of things can be added, but it's pretty rare that anyone asks, and of course if you don't ask, you surely won't receive. 

Most of the time submissions are sent by 02/07's for classification, just in case they rule against it, the firearm can be returned as a dealer sample and not have to be abandoned by a non-licensee.

 

Since everything is outlined in the letter already, I don't see how they grant permission for one, and not the rest?   Best of luck, I think it's worth pursuing.


  • 0

#6 Grasshopper

Grasshopper

    Long Time RKI Member

  • Board Donor
  • 266 posts
  • Gender:Male
  • Location:Sunny Florida
  • Interests:Engines, Tractors(old, rusty is better), mechanisms, and the occasional MG

Posted 19 September 2019 - 11:40 PM

Hi Bmarvin,

 

While not exactly the same issue, "Trapper Carbines" of the 1892 Winchester with 15" barrels are often discovered and exempt from the provisions of the NFA.  The same is true of some other short rifles that would normally be controlled by the NFA.

 

Good Luck,

 

Grasshopper


  • 0

#7 bmarvin

bmarvin

    RKI Member

  • Board Benefactor
  • 732 posts
  • Gender:Male

Posted 20 September 2019 - 08:05 AM

The gentleman that "found" the gun called West Virginia to first inquire if it is registered, even though the form isn't with the others, and second to ask about getting an exemption. Photos and a letter with the reason why were requested by ATF. They made no mention of needing the actual firearm.


  • 0

#8 DINK

DINK

    Long Time RKI Member

  • Regular Group
  • 242 posts
  • Gender:Male

Posted 21 September 2019 - 05:43 AM

I'v done it.  I stumbled across an old High Standard Model S pistol, which was a smooth-bored pistol they made before 1934.  There were several others listed by serial number in the C&R NFA-exempt list and I sent NFA Branch a letter requesting that my pistol be added to the list.  I included photos of the pistol and the serial number where it was stamped on the major components.  A couple of months later I got a letter informing me that my pistol had been added to the list.

 

It was actually pretty straightforward and painless.


  • 0

#9 bmarvin

bmarvin

    RKI Member

  • Board Benefactor
  • 732 posts
  • Gender:Male

Posted 22 September 2019 - 09:03 AM

I'v done it.  I stumbled across an old High Standard Model S pistol, which was a smooth-bored pistol they made before 1934.  There were several others listed by serial number in the C&R NFA-exempt list and I sent NFA Branch a letter requesting that my pistol be added to the list.  I included photos of the pistol and the serial number where it was stamped on the major components.  A couple of months later I got a letter informing me that my pistol had been added to the list.

 

It was actually pretty straightforward and painless.

Did you send the information to tech branch or just the generic address for transfers?

Thanks

Brian


  • 0

#10 DINK

DINK

    Long Time RKI Member

  • Regular Group
  • 242 posts
  • Gender:Male

Posted 22 September 2019 - 10:15 AM

It's been a while (2002) but I believe I just sent it to the generic NFA Branch address.  I dug around and found the text of the letter I sent, FWIW:

 

 

 

December 12, 2002

 

 

 

Gentlemen;

 

I would like to request that a particular firearm be added to the list of Curios and Relics and have it removed from the purview of the National Firearms Act.  The firearm in question is a High Standard Model “S” with the serial number 59493.  These pistols are .22 Long Rifle caliber, but have smooth-bored barrels for use with shot shells.  Other known examples of this rare pistol are all listed as Curio and Relics, but this particular one has apparently just come to light and this serial number is not among those on the C&R list.

 

In support of my request, I am enclosing three digital photographs, which show the following features of the pistol in question:

 

  • The markings “HIGH-STANDARD MODEL “S”/ -.22 L.R. SHOT ONLY-“ which appear on the left side of the slide.

 

  • The serial number “59493” which is stamped on the front of the grip.

 

  • The last three digits of the serial number, which are stamped on the underside of the slide and show that the slide was original to this pistol.

 

If there are any questions you might have concerning this pistol, I may be contacted via phone at XXXXXXXXXX, by e-mail at XXXXXXXXXXXXX, or by regular mail.

 

I thank you for your consideration and look forward to your reply.

 

 

 

Sincerely,


  • 1

#11 Howlin Mad

Howlin Mad

    New Member

  • Regular Group
  • 1 posts

Posted 23 September 2019 - 01:51 PM

An alternative to a waiver is to have the barrel rifled. No longer an AOW with a rifled barrel.

 

This guy: http://www.oregunsmithingllc.com/ 

 

You would have to ask him if he does 20 gauge, he does .410 for sure.

 

Cost for a .410 Handy-Gun barrel was $200.  Very nice work.


  • 0

#12 Bill DeShivs

Bill DeShivs

    Member

  • Regular Group
  • 34 posts

Posted 01 October 2019 - 09:43 PM

A 20 Ga. is over .50 cal. It would be classed as a destructive device.


  • 0