benedw60 Posted April 16, 2019 Report Share Posted April 16, 2019 Neat idea for those who need a m1 bolt https://www.gunbroker.com/item/808973419 Link to comment Share on other sites More sharing options...
BillyDixon Posted April 16, 2019 Report Share Posted April 16, 2019 ive done many of these, not quite as simple as it sounds ,block equires drill for roll pind , filler pieces for h-pice welded in and ground smooth,then drilled to accept m1 bolt handle. back in the day i did these for j. curtis earl he advertised them as experimental govt made, just sayn Link to comment Share on other sites More sharing options...
mnshooter Posted April 17, 2019 Report Share Posted April 17, 2019 Seller calls it a M1A1 conversion. Does the block keeps the 28 firing pin in the forward position, or does it allow the hammer/firing pin to function -M1 style? Link to comment Share on other sites More sharing options...
BillyDixon Posted April 17, 2019 Report Share Posted April 17, 2019 block has machine cuts in it so you use the 28 fireing pin and hammer., just like on a 28 bolt. ,just sayn Link to comment Share on other sites More sharing options...
Adg105200 Posted April 17, 2019 Report Share Posted April 17, 2019 Couldn't it be machined to have the H-slot sections on the conversion block to hold it in place on the 28 bolt? Andrew Link to comment Share on other sites More sharing options...
BillyDixon Posted April 17, 2019 Report Share Posted April 17, 2019 machining cost bucks, thats why we try to keep it simple to keep cost down, just sayn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now