Neil Smith M14 Transferable Conversions
Posted 15 November 2018 - 02:19 AM
I just purchased one, and now I'm curious about how many are out there.
This one is a Springfield M1A, and was originally misidentified as a factory M14 before double checking paperwork to see that Neil had done the registration.
Is Neil still alive and working in the industry? I couldn't find much information about him online.
Posted 15 November 2018 - 10:29 AM
He is alive and well. Should be at OGCA this weekend.
Edited by sherman3, 15 November 2018 - 05:16 PM.
Posted 15 November 2018 - 03:29 PM
You could meet him if you come to Knob Creek Shoot. He also knows about M-16's.
Posted 15 November 2018 - 09:50 PM
He's not an "online" guy. The only m14's I've seen from him were all cut and welded guns? There are a bunch. The one's I've seen were cut right in half and his guy did a heck of a job welding them back together......excellent work and not noticeable unless you open the action and inspect very carefully.
Posted 16 November 2018 - 04:09 AM
Or is there a phone number or contact information for him available? I'd love to chat with him.
Edited by -JC-, 16 November 2018 - 04:10 AM.
Posted 18 November 2018 - 08:23 AM
He also noted that his armor did such an excellent job on the conversions, that all parts were interchangeable, there were NO "Custom" fitted parts.
He is a great man to visit with. I always greatly enjoy our conversations.
Edited by Colt Chopper, 22 November 2018 - 08:38 PM.
Posted 21 November 2018 - 06:48 PM
Nice guy, but hard to get info out of him, and as someone mentioned not a computer guy.
He did a number of M1A conversions I had one, however, someone knowledgeable told me that Bruce Stalwell (sp?) actually did the conversions.
Posted 22 November 2018 - 09:33 AM
Posted 25 November 2018 - 09:20 PM
I'm curious to know if the smaller manufacturers who registered and welded M1a receivers could have possibly made more than Smith Ent, or Springfield Armory.
It seems not many M14/M1a registered guns are out there.
Posted 26 November 2018 - 08:06 PM
There are a good number of guns out there and of the welded together guns the Swalwell would be the one to get if you're inclined to purchase a welded gun. Several others tried it and failed. Springfield likely made the most, several hundred and a few of the Devine TX springfields were converted as well but as I understand not by them. There are numbers somewhere on Smith enterprises (might be 100 or so or less from memory?) Lots of one offs made by various people back in the day, but springfield was by far the most dominant converter followed by Smith ent., then probably Neil Smith.
There are plenty of guns, but mostly collectors buy and hold them since they are not a big hit with "shooters" so they don't sell that frequently vs. the quantity out there. Two of mine are set up specially for reduced recoil, free float match barrels, and shoot sub 1/2 MOA with a QD suppressor and federal 168g match. There's just no other MG package out there that has that capability? I have pvs-22 I can clip on the front and do it at night too. I'm a big fan of the platform, but I think a full auto AR-10 could be close if properly set up.
Posted 09 December 2018 - 03:58 AM
Posted Yesterday, 10:57 PM
What kind of quality are these receivers that were brought back to life? Would they be worth a look at getting?