HAWKENFAN Posted June 21, 2020 Report Share Posted June 21, 2020 Is the Kahr Auto Ordnance Thompson firing pin a drop in fit? Mine broke and got a new one. Seems to mic out the same, but the tip is broke off to measure against the new one. Link to comment Share on other sites More sharing options...
68coupe Posted June 21, 2020 Report Share Posted June 21, 2020 No. They require fitting. You'll have to take some material off at the contact point with the trigger group. Link to comment Share on other sites More sharing options...
deerslayer Posted June 21, 2020 Report Share Posted June 21, 2020 Take the safety out of the lower. As you start to fit the firing pin, you will probably not be able to release (or fire it) with a normal trigger pull. You have use a small screw driver to reach in the safety hole and pull the sear down further and release it. If you take off to much material you will get doubles or firing pin caused jams. You only take off enough material to get it to fire. Link to comment Share on other sites More sharing options...
peter kohler Posted June 22, 2020 Report Share Posted June 22, 2020 theres a tutorial on this site that shows what to do. ive changed about 4 of them so far. just go easy on the filing it doesent take much . Link to comment Share on other sites More sharing options...
HAWKENFAN Posted June 22, 2020 Author Report Share Posted June 22, 2020 Thanks all. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now