.. If another route to make the original 16.5 inch barrel appear shorter, and still stay legal, would be to design a custom
front vertical grip which would position it a little further forward, thus making the barrel appear shorter.
Has this been done on project "X", or any other custom project out there yet?
If so, does anyone offer this custom vertical front fore grip for sale anywhere?
If so, who ans how much?
I want one.
I was thinking that doing this modification as well as moving back the Cuts compensator would really make the Semi auto look very much like a full auto weapon.
THanks all..
On Learning About Project "x", I Was Wondering...
Started by
dallasdave
, Jan 05 2004 05:37 PM
6 replies to this topic
#2
The1930sRust
-
- Moderator
-
- 1939 posts
Respected Member and Board Donor
- Gender:Male
- Location:Confederate, Kentucky
- Interests:Thompsons, obviously. Proud West Hurley 1928 and Savage M1 owner, cave explorer, and KSP trooper (retired). Also interested in 1920-1930 American history. I appreciate all Thompson models and their owners.
Posted 05 January 2004 - 08:53 PM
Dan Block (Deerslayer) has such an extended grip, http://home.rconnect...nlaura/id5.html
Also, there has been speak here before about moving the Cutts back. Don't know where but a search might turn it up...
Also, there has been speak here before about moving the Cutts back. Don't know where but a search might turn it up...
#3
Sgt
-
- Board Benefactor
-
- 2047 posts
Long Time RKI Member
- Gender:Male
- Location:Eastern TN
- Interests:Militaria, Chess, Tools, Sherlock Holmes, Printmaking, UFOs, Ghosts, Electronics, Comic Books, Long walks in the rain, with my Savage 1928a1. (just kidding on the last one; it doesn't have to be raining) -- Ralph
Posted 05 January 2004 - 11:06 PM
I'll bet that explains the oversized vertical grips on the Kahr's now. It was maybe an aesthetic decision to make the barrel appear shorter. If that was the case, I question whether that actually works. If possible, you might want to consider the SBR route that several on this board took.
#4
deerslayer
-
- Board Benefactor
-
- 1801 posts
Respected Member
- Location:North Iowa
Posted 06 January 2004 - 12:29 AM
You'd have to reposition the attachment hole from through the grip to somewhere aft, and it gets pretty skinny where the web of your hand is. Making a longer horizontal grip works really well, but a slighly longer vertical would probably be tough. One thing that does pop into mind would be to make a new hole in the hanger about an inch forward though there might not be that much room to go without building a custom hanger too. That way you could keep the bolt going through the grip (it adds a lot of strength I'd guess). If you want to try something let me know.
Dan
Dan
#5
Zamm
-
- Regular Group
-
- 831 posts
Respected Member & Artist
- Gender:Male
- Location:Long Island, New York
- Interests:Thompsons, and all their goodies!<br>Obsolete Victorian Photomechanical processes,<br>Etching, Engraving and all Printmaking,<br>Entomology, specializing in Coleoptera,<br>Arachnology, specializing in Theraphosidae.
Posted 06 January 2004 - 04:40 AM
DallasDave,
PK is Moving back my Cutts on a 27A1 barrel. He is cutting the barrel and weilding the Cutts to the end, thus making the compensater become the barrel. Super legal and straight up.
It's only a 2 inch difference, but in perspective ( look between your legs
),
that can be a big difference!
Oh crap, I have a feeling the voodoo doll is about to appear... where's the corner?!
Zamm
PK is Moving back my Cutts on a 27A1 barrel. He is cutting the barrel and weilding the Cutts to the end, thus making the compensater become the barrel. Super legal and straight up.
It's only a 2 inch difference, but in perspective ( look between your legs
),that can be a big difference!
Oh crap, I have a feeling the voodoo doll is about to appear... where's the corner?!
Zamm
#6
dallasdave
-
- Regular Group
-
- 7 posts
New Member
Posted 06 January 2004 - 07:05 AM
Thanks Zamm,
(and everyone else too)
I may contact PK as well and have the barrel shortened and the cutts welded to the barrel also.
Can you give me a ballpark figure aon what that operation costs?
Does he re-blue the barrle once the welding is done?
Thanks,
Dave
(and everyone else too)
I may contact PK as well and have the barrel shortened and the cutts welded to the barrel also.
Can you give me a ballpark figure aon what that operation costs?
Does he re-blue the barrle once the welding is done?
Thanks,
Dave
#7
TAB
-
- Regular Group
-
- 89 posts
Member
Posted 06 January 2004 - 10:14 AM
Dave,
PK attends to all of the little things, very professional. He can also redo your actuator to get rid of the cheese grater look as supplied with the 27. If you go back a page or two to 'Early Christmas', you can see a photo of a 27 with comp moved back, fitted with one of Dan Block's horizontal grips. The actuator doesn't show up too well in the photo, not being the rather massive thing it once was...
T
PK attends to all of the little things, very professional. He can also redo your actuator to get rid of the cheese grater look as supplied with the 27. If you go back a page or two to 'Early Christmas', you can see a photo of a 27 with comp moved back, fitted with one of Dan Block's horizontal grips. The actuator doesn't show up too well in the photo, not being the rather massive thing it once was...
T
