Does anyone know where I can get "that thing" I was told about a long time ago that fixes messed up feedlips on the 20 and 30 round mags? Seems to me that there was something like a thingy that you first removed the floor plate, spring and follower and put this device in and smacked it with a hammer. I am sorry for being vauge, but its been a long time.
Anyone?
Jr
I Need Some Help With My Lips
Started by
John Jr
, Jan 30 2004 08:19 PM
11 replies to this topic
#1
John Jr
-
- Regular Group
-
- 1956 posts
Long Time RKI Member
- Gender:Male
- Location:Mena, Arkansas, USA
- Interests:Plenty
Posted 30 January 2004 - 08:19 PM
#2
LIONHART
-
- Regular Group
-
- 2785 posts
Long Time RKI Member
- Gender:Male
- Interests:Thompsons of course. All Manufactures and Models.
Posted 30 January 2004 - 08:33 PM
John Jr., I know what your talking about. I haven't seen any of those for sale. Perhaps if there is enough interest in these, maybe PK can make up a few. I'd buy one too.
#3
giantpanda4
-
- Board Benefactor
-
- 2264 posts
Respected Member
- Gender:Male
- Location:Howell, MI 48855
- Interests:Mechanical toys - cars, instruments, and of course - guns. The 1921-28 thompsons are the epitomy of perfection for a mechanical device that fills all my interests!
Posted 30 January 2004 - 08:51 PM
Interesting.
Does anyone have a picture of this?
Does anyone have a picture of this?
#4
Chopper28
-
- Board Benefactor
-
- 737 posts
Long Time RKI Member
- Gender:Male
- Interests:All Class three stuff and ammo
Posted 30 January 2004 - 09:00 PM
Glen Whittenberger makes and sells them. Any one have his address? I know he used to advertise them in the TCA newsletter. They are called magazine anvils and I think they are $50.00 each
Edited by Chopper28, 30 January 2004 - 09:03 PM.
#5
John Jr
-
- Regular Group
-
- 1956 posts
Long Time RKI Member
- Gender:Male
- Location:Mena, Arkansas, USA
- Interests:Plenty
Posted 30 January 2004 - 09:05 PM
Thats what it was!
I need one!
Jr
I need one!
Jr
#6
Randy Lish
-
- Regular Group
-
- 48 posts
Long Time Member
- Gender:Male
- Location:Salt Lake City, Utah
- Interests:Collecting Thompsons, B.A.R.'s and other firearms that are related to Police & Gangsters from the 1920-30's era. I also am interested in the Mountain Man era 1820's -1840's, as well as the Old West 1870's - 1890's. I've been a law enforcement officer for 34 years and I work part time at a local gunstore.
Posted 30 January 2004 - 09:51 PM
John Jr.
As of a couple of months ago, the following information was still good:
GlenHWhittenberger@aol.com
Glen Whittenberger
5540 Wright Dr.
Troy, Mi 48098
(248 ) 879-5511
20 & 30 Round Magazine Anvils
Makes feed lips the correct radius and distance apart.
$50.00 each
$ 5.00 S & H
Hope that helps.............
Best Regards
Randy
As of a couple of months ago, the following information was still good:
GlenHWhittenberger@aol.com
Glen Whittenberger
5540 Wright Dr.
Troy, Mi 48098
(248 ) 879-5511
20 & 30 Round Magazine Anvils
Makes feed lips the correct radius and distance apart.
$50.00 each
$ 5.00 S & H
Hope that helps.............
Best Regards
Randy
#7
John Jr
-
- Regular Group
-
- 1956 posts
Long Time RKI Member
- Gender:Male
- Location:Mena, Arkansas, USA
- Interests:Plenty
Posted 30 January 2004 - 10:14 PM
Thanks! I sent him an Email
Jr
Jr
#8
John Jr
-
- Regular Group
-
- 1956 posts
Long Time RKI Member
- Gender:Male
- Location:Mena, Arkansas, USA
- Interests:Plenty
Posted 30 January 2004 - 10:42 PM
Email bounced. I will call him tommorow.
Jr
Jr
#9
full auto 45
-
- Board Benefactor
-
- 4793 posts
Respected Member
- Gender:Male
- Location:Looking over your shoulder right now
- Interests:Thompson's, Any Machinegun, Harley's and scuba diving. In that order.
Posted 30 January 2004 - 11:02 PM
Glen may be in the process of moving. Don't hold me to that, but I know he is building a house and moving as soon as it's finished. That's all I have to say 'bout that.
#10
Ron A
-
- Regular Group
-
- 641 posts
Long Time RKI Member
- Gender:Male
- Location:Helena, Montana
- Interests:Collector of Thompson guns & items<br>Colt single actions<br>Native American items - pre 1900
Posted 31 January 2004 - 12:17 AM
I ordered one several months ago - found that he is slow in answering the E mails. I would send him a check with some for postage - he responded by return mail with the anvil.
By the way it works great!
By the way it works great!
#11
LIONHART
-
- Regular Group
-
- 2785 posts
Long Time RKI Member
- Gender:Male
- Interests:Thompsons of course. All Manufactures and Models.
Posted 31 January 2004 - 12:35 PM
I tried emailing Glen, and my email will not go through. It states that the email address is too long. Is there another? John Jr, if you find anything out, will you post it here? Thanks!
Edited by LIONHART, 31 January 2004 - 12:40 PM.
#12
Chopper28
-
- Board Benefactor
-
- 737 posts
Long Time RKI Member
- Gender:Male
- Interests:All Class three stuff and ammo
Posted 31 January 2004 - 02:07 PM
Glen also has excellent ,newly made recoil springs for 2.00 each. Real nice guy and easy to deal with. Also has a wife who is a excellent shot with a TSMG.
