Jump to content


Photo

Semi auto mg34 machine work


  • Please log in to reply
3 replies to this topic

#1 Dp28

Dp28

    New Member

  • Regular Group
  • 2 posts

Posted 17 February 2021 - 02:02 PM

I've got a mg34 semi auto that has a serial number
Looks like a tnw from bottom but does not have the serial.
The front 2 inches was missing so I found one from a cut 34 and had lewman arms assemble it.
Problem is that the back portion
1 lacks an ejection port cover hole
2 the barrel in her hole is drilled for the big part of the plunger but not the smaller part that slides into the spring.
I can't use it as is
Who can i send it to to do the machine work
  • 0

#2 Dp28

Dp28

    New Member

  • Regular Group
  • 2 posts

Posted 17 February 2021 - 06:35 PM

Inner hole* not in her hole
  • 0

#3 Ryo

Ryo

    Member

  • Regular Group
  • 95 posts
  • Gender:Male

Posted 24 February 2021 - 12:36 PM


2 the barrel in her hole is drilled for the big part of the plunger but not the smaller part that slides into the spring.

Had a good laugh..

 

So your trying to modify the TNW to accept a ejector cover?  Any reason why?

Mine (real MG34, mismatch S/N) broke the ejection cover spring, hence it stays open rather than closed.


As for the S/N it's on the ring near the stock attachment. (or at least it was for me.  Pain to find due to all the mismatch parts)


  • 0

#4 peter kohler

peter kohler

    Regular Member

  • Regular Group
  • 185 posts

Posted 26 February 2021 - 07:55 AM

my mg34 ejection cover door stays open   


  • 0