Hello all!
I'm pleased to announce the new Services that Damon at Tommygunner is providing for all those who own a Semi-Auto Thompson. Some of the Services available could also be implemented to those who own a FA. Damon is now providing individuals a chance to enhance the overall appearance of their Thompson to appear just like a Colt 1921 Model!
I have worked with Damon in the past, and the quality of workmanship speaks for itself!
I invite everyone to take a look, and I suspect Damon will be quite busy in the very near future. Congratulations Damon, and I wish you great success and enjoyment overhauling and beautifying these Thompsons!
http://www.tommygunn...vices/index.htm
New Thompson Services For The 1927a1 And Fa's!
Started by
LIONHART
, Jan 20 2005 10:46 PM
11 replies to this topic
#1
LIONHART
-
- Regular Group
-
- 2785 posts
Long Time RKI Member
- Gender:Male
- Interests:Thompsons of course. All Manufactures and Models.
Posted 20 January 2005 - 10:46 PM
#2
Sgt
-
- Board Benefactor
-
- 2049 posts
Long Time RKI Member
- Gender:Male
- Location:Eastern TN
- Interests:Militaria, Chess, Tools, Sherlock Holmes, Printmaking, UFOs, Ghosts, Electronics, Comic Books, Long walks in the rain, with my Savage 1928a1. (just kidding on the last one; it doesn't have to be raining) -- Ralph
Posted 21 January 2005 - 03:50 PM
Can you do a Kahr overstamp?
#3
LIONHART
-
- Regular Group
-
- 2785 posts
Long Time RKI Member
- Gender:Male
- Interests:Thompsons of course. All Manufactures and Models.
Posted 21 January 2005 - 11:22 PM
Sgt!
Haven't seen you in these parts of the Woods for sometime now. What.. did you get lost?
Haven't seen you in these parts of the Woods for sometime now. What.. did you get lost?
#4
Sgt
-
- Board Benefactor
-
- 2049 posts
Long Time RKI Member
- Gender:Male
- Location:Eastern TN
- Interests:Militaria, Chess, Tools, Sherlock Holmes, Printmaking, UFOs, Ghosts, Electronics, Comic Books, Long walks in the rain, with my Savage 1928a1. (just kidding on the last one; it doesn't have to be raining) -- Ralph
Posted 22 January 2005 - 01:41 AM
Lionhart--
I've been quite busy with my art stuff lately. I occasionally surface to make a bad pun or two. LOL. I'll email you my recent kahr exploits.
I've been quite busy with my art stuff lately. I occasionally surface to make a bad pun or two. LOL. I'll email you my recent kahr exploits.
#5
TommyGunner
-
- Regular Group
-
- 410 posts
Long Time RKI Member
- Gender:Male
- Location:Olivebridge, NY
-
Interests:The Tommy Gun (duh)
Fedora Linux
Hunting
Posted 23 January 2005 - 02:25 PM
Thanks Devlin, Phil..
Set up some software to produce quotes. Because some operations are included in others...it usually works out to be less than adding up the mods you want. Will be adding to the list shortly.
Ralph...
What? and deface a gun with "All the classic details of the time honored original"? Just wouldn't be right.
Damon
Set up some software to produce quotes. Because some operations are included in others...it usually works out to be less than adding up the mods you want. Will be adding to the list shortly.
Ralph...
What? and deface a gun with "All the classic details of the time honored original"? Just wouldn't be right.
Damon
#6
brian
-
- Regular Group
-
- 345 posts
Regular Member
- Gender:Male
- Location:lebanon,Pa
Posted 23 January 2005 - 03:52 PM
| QUOTE (PhilOhio @ Jan 21 2005, 10:15 AM) |
| I guess the only service not offered, because it can't be, would be removal of "Kahr Arms" from the receiver.  |
the only refferance to kahr arms, that i found, is the "KA" in the serial, i.e. "KA41##". unless it's buried under the butt stock.
#7
Norm
-
- Board Benefactor
-
- 2514 posts
Long Time RKI Member
- Gender:Male
- Location:Memphis, TN
- Interests:Thompsons (of course), Electronics, Physics, History, Mechanics, Collecting License Plates.
Posted 23 January 2005 - 04:58 PM
My Kahr receiver does not have "KAHR" on it either.
The serial number contains a "KA", but that is it.
Also, the serialnumber is stamped inside the receiver (on the underside of the top of the receiver, just behind where the hole is to remove the cocking handle.)
The address on the side is...
AUTO-ORDNANCE CORPORATION
WORCESTER, MASSACHUSETTS, U.S.A.
Norm
The serial number contains a "KA", but that is it.
Also, the serialnumber is stamped inside the receiver (on the underside of the top of the receiver, just behind where the hole is to remove the cocking handle.)
The address on the side is...
AUTO-ORDNANCE CORPORATION
WORCESTER, MASSACHUSETTS, U.S.A.
Norm
#8
LIONHART
-
- Regular Group
-
- 2785 posts
Long Time RKI Member
- Gender:Male
- Interests:Thompsons of course. All Manufactures and Models.
Posted 23 January 2005 - 05:07 PM
Phil, I would suggest that you contact Kahr, and inform them of the necessity of your statement to be enclosed as a Card, with each AND every Firearm they manufacture!
OR, The Federal Tommygunner Marketing Requirement!
Say Damon, I know you folks just shipped out my VZ24 that I sent in for Restoration. I shall let you know the moment I receive it. Thank you again Damon!(Now, would you like to do a K98?
)
My Kahr does not state "Kahr" on the Receiver. Rather, Auto-Ordnance. The Serial Number starts off with a "KA". However, there are no other Serial Numbers that I could find, other than the one on the left hand side of it's Receiver. Nothing inside my Receiver...
| QUOTE |
| (This might come to be known as the federal PK marking requirement.) |
OR, The Federal Tommygunner Marketing Requirement!
Say Damon, I know you folks just shipped out my VZ24 that I sent in for Restoration. I shall let you know the moment I receive it. Thank you again Damon!(Now, would you like to do a K98?
)My Kahr does not state "Kahr" on the Receiver. Rather, Auto-Ordnance. The Serial Number starts off with a "KA". However, there are no other Serial Numbers that I could find, other than the one on the left hand side of it's Receiver. Nothing inside my Receiver...
#9
brian
-
- Regular Group
-
- 345 posts
Regular Member
- Gender:Male
- Location:lebanon,Pa
Posted 23 January 2005 - 06:14 PM
from their web site under "contact us".
Consumer Sales & Technical Support
Mailing Address:
130 Goddard Memorial Dr.
Worcester, MA 01603
Attn: Service Dept.
TEL: 508-795-3919
FAX: 508-795-7046
Consumer Sales & Technical Support
Mailing Address:
130 Goddard Memorial Dr.
Worcester, MA 01603
Attn: Service Dept.
TEL: 508-795-3919
FAX: 508-795-7046
#10
M-2 CARBINE
-
- Regular Group
-
- 27 posts
Member
Posted 23 January 2005 - 07:48 PM
my is a thompson M1
The address on the side is
AUTO-ORDNANCE CORPORATION
WORCESTER, M.A U.S.A.
Kahr is no where on my receiver and my serial number says KC1XXX
The address on the side is
AUTO-ORDNANCE CORPORATION
WORCESTER, M.A U.S.A.
Kahr is no where on my receiver and my serial number says KC1XXX
#11
full auto 45
-
- Board Benefactor
-
- 5005 posts
Respected Member
- Gender:Male
- Location:Looking over your shoulder right now
- Interests:Thompson's, Any Machinegun, Harley's and scuba diving. In that order.
Posted 23 January 2005 - 08:41 PM
They don't put Kahr on the reciever. Just that is has their "Worcester Ma" and the "KC" or "KA" by the serial number. If it has that, it's a new made gun by Kahr Arms, the owners of Auto Ordnance and the "Thompson".
#12
TommyGunner
-
- Regular Group
-
- 410 posts
Long Time RKI Member
- Gender:Male
- Location:Olivebridge, NY
-
Interests:The Tommy Gun (duh)
Fedora Linux
Hunting
Posted 25 January 2005 - 09:59 AM
Well one thing is for sure Kahr is using the Thompson name like they own it...as successors in interest from the Numrich AOC.
Devlin,
Sure I love mausers! I use a sporterized K98 for my big game gun. I put a custom walnut sporterized stock, Pillar blocked, Timeny (sp) trigger, turned the bolt handle down, competition crown, High polish and made a custom scope mount for it. Drives tacks! Let me know when you are ready!
Damon
Devlin,
Sure I love mausers! I use a sporterized K98 for my big game gun. I put a custom walnut sporterized stock, Pillar blocked, Timeny (sp) trigger, turned the bolt handle down, competition crown, High polish and made a custom scope mount for it. Drives tacks! Let me know when you are ready!
Damon
