Jump to content


Photo
- - - - -

Ejector Removal 1927m1 Semi


  • Please log in to reply
2 replies to this topic

#1 M1Brian

M1Brian

    Member

  • Regular Group
  • 83 posts

Posted 22 October 2003 - 03:59 PM

So if I read it correctly from needing help with disassembly 1927a1 semi odball post to remove the ejector from the bolt you first pry it up and then unscrew it or is it pry it out away from the bolt and unscrew it. Sounds like the first. About how much does it rise before contacting the threads?

Thanks
M1Brian
  • 0

#2 Grey Crow

Grey Crow

    RKI Member

  • Board Donor
  • 1077 posts
  • Location:North Central Pennsylvania
  • Interests:Thompson Submachine guns, computers, reptiles.

Posted 22 October 2003 - 04:03 PM

M1Brian,

The ejector is on the left side of the receiver, just above the mag well. Once the bolt is removed or in its rear position, lift the ejector plate and rotate it, being careful not to scratch your receiver.

The extractor on the right side of the bolt. To remove the extractor, remove the bolt from the receiver, lift the front edge and pull forward .
  • 0

#3 M1Brian

M1Brian

    Member

  • Regular Group
  • 83 posts

Posted 23 October 2003 - 02:25 PM

I was in a bit of a hurry when I posted and don't believe I typed ejector instead of extractor. Another embarassing thompson moment. I would be dropping down and giving R Lee Ermy 20 for a stunt like that. Anybody see him unload the 1928 on sunday night on mail call into a bunch of watermelons?

Later
M1Brian
  • 0