

Sa 1927a1 Newbie
Started by
TOM R
, Mar 12 2006 10:31 AM
6 replies to this topic
#1
Posted 12 March 2006 - 10:31 AM
hey guys I used to belong to the old board here years ago, and now I am back, just picked up a 1927a1 auto ordnance at the gunshow looks new was $725 out the door, can't wait to shoot it, don't worry guy I am not gonna start ruining mags, I am gonna modd the guns latch to fit gi mags

#2
Posted 12 March 2006 - 11:15 AM
Hey Tom,
Enjoy your semi auto Thompson. I purchased one from one of the board members a little less than a year ago and I had it re-done with a full auto frame for the bolt hold open and detachable buttstock, comp. mounted over the bbl for a total of 16.5" and a few other things that have been discussed in many other threads. (E-mail with any questions)
Have fun,
Dave
Enjoy your semi auto Thompson. I purchased one from one of the board members a little less than a year ago and I had it re-done with a full auto frame for the bolt hold open and detachable buttstock, comp. mounted over the bbl for a total of 16.5" and a few other things that have been discussed in many other threads. (E-mail with any questions)
Have fun,
Dave

#3
Posted 12 March 2006 - 11:57 AM
mine has a bolt hold open, and the finned barrel is 17 3/4" from reciever to end of the comp, unfortunatly i think the detatchable stock is a nogo in n.j.
#4
Posted 12 March 2006 - 12:16 PM
Dan Block can make a fixed stock that resembles the '28 buttstock. It's much better looking than the funky one that comes on the semi's.
#5
Posted 12 March 2006 - 04:50 PM
http://img106.imagev...90_IMG_0455.JPG
http://img111.imagev...85_IMG_0451.JPG
http://img23.imageve...70_IMG_0444.JPG
http://img23.imageve...61_IMG_0443.JPG
http://img121.imagev...96_IMG_0460.JPG
Here is some work from Dan Block
I cut the barrel down and put an early style comp on it, from Doug Richardson
Still need a hold open lever put in still.
Lyman sight and I'll be done,I think...
http://img111.imagev...85_IMG_0451.JPG
http://img23.imageve...70_IMG_0444.JPG
http://img23.imageve...61_IMG_0443.JPG
http://img121.imagev...96_IMG_0460.JPG
Here is some work from Dan Block
I cut the barrel down and put an early style comp on it, from Doug Richardson
Still need a hold open lever put in still.
Lyman sight and I'll be done,I think...

Edited by Elbow, 12 March 2006 - 07:21 PM.
#6
Posted 12 March 2006 - 09:39 PM
Elbow,
Very nice !!! Dan does excellent work.
Dave
Very nice !!! Dan does excellent work.
Dave

#7
Posted 13 March 2006 - 05:08 PM
elbow nice gun, guys thanks for all the info , I remember from the old board here years ago that there is a ton of info great board guys
