MG34 - 42 Message Board Latest Topics

WTS: Entirely lot of MG42, MG42/59, and MG3 parts

Wed, 29 Jul 2026 23:50:56 +0000

I am selling all these parts that my friend assembled over the years to use. Unfortunately he has issues now that prompt him to sell what cost him $15K for less than half…$7K! The parts were demilled early, as the torch cuts to the rear only were very “Kind” in that they are very clean…no splatter or discoloration. There are only about 6 parts that are Yugo…that I can tell…and these are the Ejection Port covers (3) 1 Bipod, and a unverified Catch. Of the 3 Top Covers only one has serial numbers…and those are not on the top, but the right rear of the side. The 8 mm bbls are gorgeous with 3 being original WWII finish with such markings..and one looks to be original WWII, but might be re-finished and electro pencil marked. Two complete 8 mm bolts…one is late war (ar) and matching. There are two stocks that are also great WWII German stocks. One is the earlier wooden stock that uses a steel band wrapped around the wrist to avoid cracking instead of wrapping with wire as they, and the Yugos did. The second is an original Bakelite stock with WaA. The two bbl shrouds are saw cut once behind the Trunion. There is enough to do one WWII 8 mm build from these parts…with plenty of leftovers. Then there is an Italian made minty MG42/59 that has all parts except the Heavy Bolt. He also has for this in .308 a mint, unissued Steyr bbl. There are many receiver sections, one is German WWII, the other is from an MG3. So many parts…I can provide a list to anyone interested…but he wants to sell all at the $7K price.

*Seller has permission from Dalbert to sell these items.

MG34 .22 conversion

Sun, 02 Aug 2026 17:45:02 +0000

Found on YouTube, "MG34 .22 Conversion" CLICK HERE. Does anyone have any information about this? Appears to use a GSG 110rd drum. I'm assuming it's a .22 MG dressed up with an MG34 parts kit. Anyone know anything more? Any ideas?

MG34 receiver jig?

Sat, 18 Jul 2026 21:17:56 +0000

I was lucky to find a nice MG34 parts kit with the demilled receiver pieces. Does anyone know where to find a welding jig to make it into a post sample? I did a search online and it looks like they were never commercially available.
KK

XMG 3D Printed MG34 Style AR GRIP

Mon, 14 Oct 2024 13:50:08 +0000

I’m offering a 3D printed AR grip that resembles an MG34 grip. This helps give your XMG more of that MG34 look.

Black solid PETG. I haven’t broken mine yet in normal handling going to the range in a soft case, etc. It certainly can be broken if you roll down a hill with it. You can attach a sling but I would not carry it by the sling. I have held mine by the sling just to test it but I don’t think it would survive a march.

Most importantly it feels good in the hand!

You will notice a little bit of an odd surface finish in some places. This is an issue with the model and printing that I couldn’t resolve after hours of tinkering. But you can’t really see this stuff from a few feet back. If you have bad eyes just forget I mentioned it!

This is an AR grip so you can stick it on other guns than the XMG if you feel inclined.

Price is $45 each shipped.

WTS: MG42/59 MINT HEAVY BOLT

Sat, 25 Oct 2025 21:01:40 +0000

am selling (With Dave’s permission) a minty (From mint Italian Beretta made MG42/59 parts kit) Heavy Bolt for the .308 NATO, or 7.62x51 round. I am asking $1100.

Early MG 42 buffer

Sun, 20 Jul 2025 15:47:27 +0000

Pictured is an early MG42 cra buffer on the left and a late one on the right. The early buffer has a larger diameter (25mm) than the late one (22mm) and will not accept the three wire main spring. If you force that spring over the early buffer, the MG will not cock because there is too much friction against the receiver housing

so i suppose they had a simple MG34 like spring at the very beginning

WTB MG3 0-marked feed assembly

Sat, 16 May 2026 04:58:12 +0000

looking to buy a MG3 top cover and feed tray, with the 0 markings to indicate compatibility with m13 links. Hoping to pay ~400 for both pieces, open to negotiation

Beretta MG42/59 Kit Value?

Wed, 06 May 2026 16:30:36 +0000

I'm gearing up to part with my 1968 Beretta MG42/59 parts kit, complete with NOS 7.62 barrel, belt loader/cleaner, belt, etc.

It is a seemingly unissued kit, choice cuts, extremely easy post sample or semi build. Internal receiver rails were carefully deriveted and removed prior to demill. A very nice example. 1968 Rheinmetall / PB Beretta production with FAT 69 (Fabbrica d'Armi di Terni 1969) acceptance stamp. I saw a Lewman built semi sold on GB a few weeks ago for $14k, I believe he charges ~$3,500 for builds these days? A no-law-letter post sample is on GB right now, approaching $10k with over 4 days left.

I'll list it up on here and Sturm before GB, if anyone has interest feel free to PM me. Here are some photos of it mocked up for display, the third cut is quite clean like the others and located between the rear sight and feed tray.

WTS some yugo m53 parts

Wed, 21 Jan 2026 02:12:05 +0000

WTS a yugo m53 feed tray, complete top cover, and complete grip stick

~~Feed tray - $80 + shipping~~ sold

Top cover - $150 + shipping

Grip stick - $250 + shipping

can send additional pictures or details upon request

My MG34 and Stuff

Fri, 21 Nov 2025 19:46:39 +0000

Just to share some of my items i have collected....

WTS: MG3 & MG42 parts

Sat, 27 Sep 2025 19:38:30 +0000

I am looking to sell these parts.
MG3 NOS Feed Tray used for belts and Ammo Case……….$155+shipping

MG3 NOS Flash Hider……$75+shipping

MG42 REPRO Winter Trigger…..$50+shipping

MG42 REPRO AA Spider Sight…..$20+shipping

David has given me permission to sell items.

WTS....MG15 Double Drum Magazine Loader

Mon, 01 Dec 2025 18:55:47 +0000

Complete set for loading the D-T15/PT34 Double Drum Magaines.

Please Note...i have this Same Item Listed on...2 Platforms....Guns International and EBay..USA.

I only have ...1 Unit for Sale..sold the other Unit on Ebay couple weeks ago.

Includes...Board...Metal Winder and Tool.

$1200.00 US dollars

MG42 Post Sample Videos

Sun, 09 Nov 2025 14:40:48 +0000

Thought I'd show some videos of my post samples. I've built three so far and this 3rd MG42 build was the most challenging. The receiver was bent/warped, the WWII top cover and feed tray was bent in various areas, and I had to replace the rails with new ones (installed rivets with air hammer). My second test fire session was flawless with the two belts shown in the video.

https://www.youtube.com/watch?v=pkJ_rSyCqsI

Video of my other two. One is an MG3 and the other is an M53. All re-welds. The twin mount was missing the pedestal so I fabricated a replacement from scrap steel I had. The buckles to secure the two halves of the pedestal were purchased on Amazon. And obviously the feet are just wood 2x4s.

https://youtu.be/A0KZJMwASCI

WTS: SOLDLate war German MG42 BipodSOLD

Sun, 26 Oct 2025 21:28:54 +0000

I am selling (With Dave’s permission) this very late German WWII MG42 Bipod. I’m asking $125 plus shipping. If it is taken with my other parts listed, I’ll include it for $75 more. **SOLD**

WTS: SOLDGerman MG42 and West German MG3 partsSOLD

Sun, 26 Oct 2025 19:35:43 +0000

I am selling (With Dave’s approval) this group of German (No Yugo) MG42 parts, as well as West German MG3 parts. The two grip panels are believed to be….1 West German, and the other (maybe) a repro copy. The latch on the Barrel Change door is West German. The West German MG3 parts look to be unissued. The Spider AA Sight as well as the Winter Trigger are definitely good repros. $700 plus shipping.**SOLD**

1942 Dated Maget MG42 Amnesty Registered

Sun, 20 Jul 2025 00:23:54 +0000

Hey gents, I figured I'd share this one. This is a really cool, mostly matching 1942, dated MG42, made by Maget. I picked this up recently. This gun does have some usage and characteristic to it. However, this gun is extremely cool in the aspect that it retains mostly matching serial numbers, with the exception of the barrel, which is unnumbered, the feed tray, and the bolt. However, the feed tray looks to be from an earlier 1942 MG42, given that it has the full four digits instead of the last two. Wanted to share, and also wanted to see if anybody might have another Magit 1942 dated MG42 to compare? It's rather interesting on this one, as the lower two seems to have a mismatched serial number on the left side by the trigger, but was force-matched by armor or matched somewhere along the lines in the field with the last two digits. This one alao has the early style MG34/42 bipod as well. Enjoy, gents.

WTS: MG1, MG3 7.62x51 NOS Feed Tray

Sun, 28 Sep 2025 17:05:46 +0000

Looking to sell….with Dave’s approval….this mint, NOS, MG1, MG3 7.62x51 Feed Tray. $160+shipping.

MG42 with code NC MG42 1598 l cra have been made

Sat, 20 Sep 2025 18:25:43 +0000

I would like to know if anyone can help confirm with me the approximate manufacture date for an MG42 with the rear receiver markings of:

NC MG42 1598 l (Lower case L) cra

WTS MG42 Manual excellent contents.

Sun, 21 Apr 2024 18:20:54 +0000

Super MG42 users manual, great images - note - in German!

US$125 including postage

Mark

How much does a MG42/MG3 double lafette pedestal mount weigh?

Wed, 06 Aug 2025 00:21:57 +0000

I am looking at a double MG3 pedestal mount made by HK. No shipping is available. Pickup only. Can anyone say what it weighs with no weapons installed.

This is a stock picture. Mine would not have the outriggers. Thanks.

WTB: YUGO M53 (8mm) Belt Loader in original Can. MINT

Sat, 21 Jun 2025 16:21:20 +0000

I’m looking to purchase a post war Yugo 8mm Belt Loader that was identical to the early German loader. I want to find this still in the grease and in mint condition inside its original Yugo lime green carry ammo can with red diagonal stripe. Impossible to find?

MG42/59 Heavy Bolt/Buffer & Steyr .308 Barrel.

Wed, 30 Jul 2025 22:39:53 +0000

I will be selling the MG42/59 Heavy Bolt and its associated Buffer along with an unissued Steyr .308 Barrel. I purchased one of the minty (Looks un-fired) parts set of the Italian made MG42/59 that came from Bowman Arms about 3 or so years ago. I will post pictures of these three items later tonight or tomorrow after returning from my trip…but bid just like to ask about value. I did notice one of these bolts recently listed on GB, but the price was about $2K….which I think is insane! Can anyone guide me on fair market value for all three of these mint/unissued like conditioned items? I’m thinking somewhere around $1500 for Bolt & Buffer, and perhaps around $500 on the Steyr barrel?

Genuine MG 34 Patronentrommel double drum

Thu, 29 Apr 2021 03:48:40 +0000

It's finally here.

With a lot of help from Dan Shea here and Greg Felton in the UK, I was finally able to import a genuine MG34 Patronentrommel double drum from England into the U.S.

It was not easy and the whole process took over 1 year!

Picked Up an MG13

Sat, 08 Mar 2025 15:27:27 +0000

Thought I would share a transferable MG13 I just picked up. It is a typical Portuguese Contract firearm. I've always had the 13 on my radar and I happened across this one. I have not fired it yet, but I am looking forward to getting it out when the weather improves. It did not come with an S drum, but I have a transit chest full of mags - no other parts at the moment. When I finally get an MG42 added to the collection, I'll post a family portrait.

MP40 Extractor Installation Issue

Mon, 17 Feb 2025 04:30:44 +0000

Hello all,

Could someone provide guidance on installing a replacement extractor for an MP40? My original one is worn out and now just sits loose in the bolt groove. I’ve purchased an original German part, but it seems that I need to hammer “not tap” it in forcefully at the pin hole, which doesn’t feel or seem right. Is it common for these extractors to require slight shaving or adjustment to fit properly in the pin hole? Any advice would be appreciated!

First photo is empty bolt next to old and new extractors:

Second photo is the old extractor lying freely in grove:

Third photo is the new extractor laying in grove but will need to be hammered in or filed down to fit.

Thanks