Jeff51
Regular Group-
Posts
58 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Jeff51
-
The markings on the magazine is The Crosby Co.
-
I have a BFONG and am not sure where to ask this question. I bought 20 rounders from Apex and got them. After cleaning the cosmoleane from the magazines I found out that one of the mags will not work. I can insert the mag and have to beat it out of the gun! I have other 20rounders and 30rounders that work fine.How do I get this 20rounder to work?
-
Does anybody have any tricks/tips to reinstall that doesn't involve a lot of cussing? This is for M1A1 BFONG. Thanks for the help.Jeff
-
Has anybody heard from PHIL-ORD on the BFONG ? How long is the wait? I have e-mailed them several times on this question and have not gotten an answer. I hope I am on the list.
-
Rough guess' I'm selling my Semi BAR with the case and accessories , to a dealer how much can I get? I have the 2-20rd mags and 2-30rd that came with it and a repo right hand bandoler with 6-20rd. Shot maybe 200rds. Can anybody give me a guess?
-
Where did you get the M3 large plate from ?
-
Lebman 1911 Select Fire
Jeff51 replied to deerslayer's topic in Gangsters, Outlaws & Lawmen of the Early 20th Century Forum
Have you seen this yet. Its old but fun to watch ! -
Need Oiler cap with stem for M3A1
Jeff51 replied to NFA amnesty's topic in The U.S. M3-M3A1 Message Board
I think I have what you need. It still in a parts kit that I got 20 years ago. You just want the part that unscrews from the handle, right? Jeff -
Reprinted WWI BAR Ordnance Handbooks
Jeff51 replied to PrayingMantis's topic in Browning Message Board (Full Auto Only)
How do you want payment? P/P Let me know. Thanks, Jeff -
How do you get 8 magazines in the pouch ?????????????????? I can get 7 ,but can not get 8. I looked at your picture and followed the mag inserting and still can't get 8 . I can get four across the bottom and three across thr top but thats it. Can you help? I'm pretty sure the pouch's are the same size. Thanks Jeff
-
WTS Thompson Hat Pins M1928A1
Jeff51 replied to ron_brock's topic in Thompson Submachine Gun Message Board
PM Sent. -
Phila Ordnance M1 Thompson Full Auto Blank Gun
Jeff51 replied to reconbob's topic in Thompson Submachine Gun Message Board
Bob- Please put my name for one of your weapons. Let me know when in Feb they will be ready. Thia is for one of your blank firing Thompsons. Thanks, Jeff -
Thanks for the idea! I took it to my gunsmith and in 5min had the recoil spring installed.Reassempled rifle last night and all is well. I will pick up the air lines and see about th next time I clean it. Thanks for the help. Jeff
-
I disassembled my OOW1918A3 SLR for cleaning for the first time and I tried for over 3 hours to get the recoil spring and rod installed after cut fingers and cussing I still could not get it installed ! Any body have any hints to get this spring installed? I have seen OOW video and thats why my fingers are cut up. I can't hold the spring compressed long enough to install it. Is there a short cut I missed? Thanks, Jeff
-
M3 Tools-interest if I machine some?
Jeff51 replied to Got Uzi's topic in The U.S. M3-M3A1 Message Board
I might be interested, depends on which tools and what the price would be. Jeff I have a M3A1 will that make a difference on the tools? -
I found a company that has 30 06 150grain FMJ made by a company called "Military Surplus" that has 500rds at a cheap price. I can't find anything about this military surplus company that makes this ammo. Has anybody heard of them? This site Ammo.com. Thanks for the help, Jeff
-
Can I use any 30 06 ammo, or do I need to stick to "Garand" ammo? Also is POF ammo any good? I expect to get the rifle sometime in Jan. Thanks
-
Would you send some of your neighbors over here to help? I finally got 8 mags in the pouch (nylon, Vietnam era) so I don`t think it shrunk. I`ll never get the cover to snap. Is there a certain order they go into the pouch, up or down or feedlips in first or back end in first.. Yes I know this a lot of questions. Thanks for helping an old man out. Jeff
-
Nobody know`s how to do this.
-
I`ve got two of the nylon pouch`s and am wondering if any body can tell me how to get EIGHT mag`s in them! I can get six or seven but no matter how hard I try I can`t get EIGHT ! Can somebody draw me a diagram to help me out? Thanks Jeff
-
If anybody comes up with a disk for the M3-A1 let me know because I`ll take one.
-
Senate Gun Control Vote Looming
Jeff51 replied to 1921A's topic in Off Topic Forum - If your post disappeared look in here
Done, again ! -
Paperwork Came In! New Owner.
Jeff51 replied to 50RoundsOnDeck's topic in Thompson Submachine Gun Message Board
The bag (I believe) is a Vietnam carrying case for a M-60 barrel. It looks the same as the bags that I have. -
No thats not it. I want the other end that sits at the back of the reciever tube that holds the guide rods together. I thought that I had the right name for ths part. I would like the big plate instead of the small (bar)plate. What exactly is this called? Thanks, Jeff I found out that its called "bolt and guide group"and I don`t need the bolt or the springs.
-
Does anybody know where I can get one? I am using the orignal small plate and thought I should up grade to the larger one. Thanks, Jeff