Glen Whittenberger

The show and shoot will be at Deer Creek Range in Jonesboro, In ( about 20 miles north of Indianapolis ) . The Thompson show will be Saturday the 6 of October , and the shoot will be Sunday the 7 th . We will shoot : Standard Course of Fire 3 - gun " Elliot Ness Body Guard " event Spray and Pray Thompson " Drive By " Man on Man steel plate Open Shooting Bring plenty of ammunition . Please see news letter or go to " www.thetca.com " for futher details . PS: Or contact Glen Whittenberger

I've been shooting my 22 kit in a M1 for about two weeks and I left the kit in the gun and the gun in the barn . On removing the kit I found that the 45 barrel had rust on it . I am guessing from the heat form all the 22's shot thru the liner . The rust was just surface and brushed out . I "Rigged" it and put the liner back in and I will check it in a couple days. Just a warning to all you 22 Thompson shooters . Glen

These are to new production 22 kits for the 1921/1928/M1/M1A1 Thompson . The barrel is cut to install without removing the ejector and the bolt carrier is machined to except the new steel 21/28 actuator ( will not mare top of receiver ) . Complete ( unfired ) with 10 mags , Shipped for $850 each . Please e=mail Glenhwhittenberg@aol.com or call 812-935-7221 for more info .

i'LL SELL YOU 20 FOR $215 SHIPPED .

:rolleyes:RPM WITH bLACK DOG KIT Blazer Fed Bulk Dyna-point 11 1/2 ' 0.038 5.5 cpi 643 681 662 12 " 0.035 5.5 cpi 677 695 699 9 1/4 0.043 6.3 cpi * 768 796 765 10 1/4 0.043 6.3 cpi * 857 888 872 * = my heavy duty spring

I also got one from Merle when he and I were at TATA. He cut my barrel to leave in the stock extractor and bolt for the raised cocking knob on a 1928. I had some friends over shoot Saturday and we fired 1500 + 22 lr ( 550 Fed bulk pack, 500 CCI blazer, 200 CCI Mini-Mags,( 200 Win Dynapoints , 150 Rem Std Vel with a suppressor ), and some Stingers. WE had " ONE " failure to extract with the Fed Bulk pack . I did run a patch down the barrel every 500 rounds to clean the chamber . Rpm was about 800 with 9 1/4 " spring and 775 with a 10 " spring. These were my heavy duty ( M1 / 28 ) springs that I cut down . I would recommend this kit to anyone thats want to have some cheap fun with a Thompson . Merle says he only had about 10 kits left at this time , and does not know if Black Dog will run any more . My advise is to buy now ! :agree:

21 recoil kits are sold out. I still have the JAC 22 kit .

The Ceiner 22 all kit has an extra sear cut , my steel weight set, and two mags . Used ( read tuned ) . Works great . $ 600 shipped . ( New price $750 ) The 1921 recoil kit contains an actuator, spring guide, buffer w/discs , and recoil spring . $550 shipped. This a a new after market kit ( never in a gun ) . Will work in all 1928 and 1921 full auto guns - save your REAL parts or speed up your 28. Please e-mail Glenhwhittenberg@aol.com

These anvils correct the feed lips on 20 and 30 round mags. Please e-mail glenhwhittenberg@aol.com for complete list of Thompson parts.

Drive a lead bullet backwards thru barrel with a 7/16 " brass rod. It will catch the case and drive it out.

I use 5.0 Solo 1000 with 230 FMJ.

99 % WCC and TZZ onced fired GI brass for $50 per 1000 delivered. I have some TZZ match brass for $60 per 1000 delivered. limited quantities of each.

http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif The 2007 T C A Show and Shoot will be held 13 and 14 July 2007 , in the Bloomington, In area . Please contact the T C A at TCA1934@COMCAST.NET , or P.O. Box 1675, Ellicott City, MD 21041-1675 if you plan tp attend. Details will be in published in the club's February 2007 Newsletter. There will be lots of competion shoots and open shooting, complete with mag dumps !! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/rolleyes.gif

As Ken at age 83 once told me ( At one time I had 102 regestered machguns. Now I just collect Machine Gun Owners !!! ) He let my shoot his Swedish K at Knob Creek for 10 + years . He was a GREAT ASSET to the class 3 comunity ! I WILL MISS HIM ! Glen Whittenberger

http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif M60 JOE made me a loader for the JAC 22 Thompson mags. He modified a Ramline loader with a new base. It works GREAT!! He sell them for $138 and they are worth it. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif Go to his web sight and e-mail him and he will make you one.

http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/sad.gif Yes !!! WH barrels are only good for 15,000 rounds of ball. Military barrels are good for 20,000 rounds of ball. I had some barrels carbo-nitriated, they lasted about 35,000 rounds of ball ( not cost effective, but saved changing so much ). I have used 8 barrels in 225,000 rounds in my WH. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif It is still running !!!!

http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif DSA ( www.dsaarms.com) has used ones for $10 + shipping. Old but functional with a little TLC. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/rolleyes.gif

http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif Thompson mag anvils put correct radius on 20 & 30 rd mags $50 + $5 shipping 1928 recoil buffer $5 + $1 shipping 1921 buffer washers ( set ) $10 + $1 shipping saftey / selector removal tool, plastic coated to prevent scratching trigger housing $15 + $5 shipping M1/M1A1/1928 recpil springs $5 + $2 shipping rear sight rivets ( set ) plese specify fixed or Lyman $5 + $1 shipping e-mail for address TNX Glen http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif

Don Hall's shoot report letter said April 16 & 17 , 2005. If it changes it will be in Thompson news letter. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif

I have mag anvils that will allow you to put the correct radius on the feed lips of 20 & 30 rd Thompson mags. I also have made another run of recoil springs for M1/M1A1/28's, they have two more coils than the ones I had the last couple years. They work GREAT http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif

I had made new recoil springs for the M1 and 1928 Thompsons. They have two more coils than the ones I've been selling. I shot 2500 + rds at Knob Creek without cleaning the gun and it ran great. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/rolleyes.gif $5.00 each + $2.00 per order shipping. Thank You

207,250 since 1983 in a West Hurley ( and still running ). Approx 9 barrels both GI and aftermarket.