Jump to content

Mad Machinist

Regular Group
  • Posts

    131
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Mad Machinist

  1. What beretta reciever are you referring to as sheet metal.......the M38 and M38/44 stuff I have is all machined......
  2. I ordered from them once before......was not really pleased with the product, plust it took quite a while to show up....ordered a reproduction forearm and it was kinda cheesy at best. Call me at the shop (Macon Armory) Monday and remind me....I'm peicing together/making the parts for a franken kit that will eventually get built into a shooter.....I'll pull the screws on one of mine measure and see if I have any.....
  3. https://www.justgunparts.com/index.php?main_page=index&cPath=6
  4. Link to Keep shooting new production???? Looked but didn't find.
  5. Material,ID, and estimated price?.....I could use a 40 at the moment......Haven't had time to finish fixtures to make
  6. If so give me a shout at Macon Armory 478 474-2990
  7. What is humorous about all of this on the Keystone /Christie mags is the dies are the same ones......the original Christie mags were made by Service Stampings in Willoughby OH ......who also make parts for me as well. When Ken sold them they went to Keystone. Wish now I had bought the dies when I had the opportunity a few years ago.....just didn't have the spare cash at the time.....Might look into it again.....:D
  8. I would make other arangement than Square.....If they find out what you are using for is firearm related they will pull the plug with NO notification. Ask me how I know I used them early on when I was first starting out....and they seriously screwed me up.....Cool product, wish I'd thought of it as another use for my 20 round AR45 magazines.....May you sell a metric crap load of them!!!!!!!!!!!!!!!!
  9. Find someone with a mill......plunge cut with a small endmill and then follow with a drill once you have a flat. Gonna take some serious setup to not drill a new hole in the mag well on the backside..........:-) Seriously if the setup is good you can drill from both sides and meet in the middle.....then ream without the magwell EDIT: Are you trying to cut the opening for the mag to enter the tube.....or drill the hole for the pin to hold the magwell in place?
  10. Gonna move these to Gunbroker soon, As I said I'm clueless on value....if anyone wants them, make me an offer, I'd rather they stay here in the community.
  11. If I have lost my mind on price...LOL.....let me know....I have zero background with this stuff......price based on a google search
  12. Recently aquired these in a batch of stuff, and as I don't have a type 92 or anticipate aquiring one thought I'd see if anyone here was interested. Best price I have seen on these is $150 a strip and not in as good condition. As always I am flexible and open to offers and trades. Always interested in Thompson , MP38/40, M38 Beretta, FBP, and sten goodies.....kit or parts......:D Hopefully I can find these a proper home.
  13. One man shop......and I am swamped. They are still on the board to be done....I have material, but wasn't a high priority when I started looking at them. They will get done eventually....but it is a speculation part......I have prepaid orders that come first.
  14. Looking for Sten lowers with fire control parts......don't need bolts, barrel, magwells or reciever parts......need about three sets total.....if you have fire control stuff I can make the housings. Need a loop stock as well......If you have spare stuff laying around......give me a shout. Thanks, Rudy
  15. I can make one that works no sweat......but I'd like to make one as close as possible to the original. Unfortunately the online pics basically suck and don't give the detail necessart yo do a faithful reproduction.......I wouldn't need to disassemble.....jus need to see one working. Exploring the possibility of getting access to the one at FT Lee....that was at Aberdeen. A significant number of my peer group form the Army while retired, still carry a bit of influence. when they wore three stars on active duty. We shall see.
  16. I will confirm in the AM, lost the hydraulic power unit on the Haas lathe and forgot to check in the rush to get the lathe back running.
  17. Someone planted the seed in my somewhat fevered brain that I needed to look into doing an EMP44 clone ......and I'll need to duplicate the sliding magwell to make it. Pretty much got the rest already figured out. Just need to do the Magwell. I COULD just make one but I'd like it to be mechanically similar to the original..... and not what I come up with to accomplish the goal.
  18. .578 x 28 is usually indicative of a 45 acp pistol suppressor with a spring loaded neilsen device required for locked breech reclil operated pistols to function. Please do not shoot your MP40 unless you have an adapter to disable the moveable piston. For a blowback action you'll need a fixed piston adapter for your can. I'll measure the threads on one of my barrels and get back to you. If you were closer I'd say swing buy the shop and we'd make one.
  19. Does anyone have one of these in private hands that I could look at? willing to road trip to get eyes on one so I can make drawings and get multiple hi resolution photos.
  20. I have a few pieces......Might be able to come up with enough to complete what you got.....Send me a pic of what you have next to a ruler.....I'll see what I can do....and I am gonna be making Display receivers in the near future....just tooling up now. Rudy
  21. nope...I was 5 minutes late.....bought a bunch of other stuff from Charlie and beat on him (not really, he's a great guy) till he dug some more stuff up for me......I DID get a bunch of blank tubes from him that I am gonna machine into display receivers....
  22. madmax1299.....I can't find your contact info. Got the tail pieces in, but shorter than I expected. A lot of what I got was demilled tube gun parts......usable but not what I was hoping. for. I have two for you to choose from...one is 1.620 long, the other is 1.725 in length.
  23. Do you have the sight and need just the base? I need a couple myself and was planning on making a couple....hoping to have a lot more free time in the near future...
  24. Does anyone have the drawing for an MP41 receiver......while close to an MP40 which I have.....some definite differences and I'd like to get it right the first time as I am using one of my remaining Philly ord tubes. Lacking a drawing....if anyone in the middle Ga area (within a couple of hours of Macon) has an actual MP41 that they would let me take a few measurements off the reciever, I'd be very grateful.
  25. Do you have a link to these......????Really curious, but My guess is ATF would classify this as a machinegun. From what I can see I could have it running in 10 minutes with a dremel and cutoff wheels.
×
×
  • Create New...