Rekraps

So, only use the aluminum casings for sponge rounds. If you use them for chalk AND use a full load .38/blank, the case will bow. Using sponge at 1/2 power works perfect.

My set.

As it happens, I own a full set of almost identical original pouches. This is most assuredly a Luftwaffe pouch (1/2 set), in excellent condition. My full matching set cost me $2,400 four years ago, with 1/2 pouch items, in similar condition going for $1,200 or so. The selling issue for you will be it's a 1/2 set and collectors assembling a "rig" would want a full set.

Based on my experience, both guns were low count guns. Makes no difference now, I've had them both worked.

Hey Brian! Good to see your post. Both of my adapters that I purchased from you work perfectly, adding superior stability to the '76 platform, making it a reliable and sturdy platform. Your design is just great. I personally use the SIG minimalist which looks and functions great. For those of you considering this excellent solution to the shitty OEM stock on your '76, do it. Just follow directions and go slow on the install for a non-permanent accessory that makes the gun great.

Hey Jim, great post. I have owned three S&W 76's (currently have two) and all three units required trigger bar work which struck me as odd given the condition of the guns. It was my assumption (uh oh!) that these guns, even though not really designed for long-term use, would at least cycle through 5,000 or 6,000 rounds before things went bad. All three of my guns appeared to be be low round count so I was baffled. My solution was of course to ship them off to Andrewski who reworked the three piece bar and welded high strength steel to replace the softer OEM stuff. So they will be good for 10K rounds according to John. Now to your question, I strongly suspect that virtually everyone who owns these guns uses them almost exclusively on FA, thus the idea that limiting use of the semi-auto function would not really impact the wear, as most of us have experienced trigger bar failure. From my perspective, the issue is the tiny surface area on the sear and sharp edges. Even on FA the sear moves slightly which imparts wear on the much softer trigger bar end surface and so like a match, keep rubbing and "poof" it's gone. My recommendation is a hardened trigger bar, either Andrewski or some other source if you can find it. Glad to respond!

It's enough to make a man cry... brand new Thompsons!

Nice pick-up! I'm always happy that these guns (and others) are still out there... Regarding refinishing, the vast majority, if not all of the M3's were arsenal refinished after the war, yours looks just fine.

Very nice! Excellent toy!

Pic? I have never seen a PPSH with a reinforcing plug.....

Both loaders are original. I have invested quite a bit of time and money to get my "rig" correct with original parts, same waffen stamps etc. Repros omit the waffen stamp.

Agree. Not a U.S. Property marked gun, so an export or commercial version. Burst is by and far the most common (Auto is very limited in production). Gun looks good, but may have had the upper replaced (not a good match in finish for top/bottom).

Both guns look like unmolested early Wilson/Andrewski guns. By unmolested I mean not rebuilt/refurbished. Number two has been painted of course.

So, the metal casing (with small expansion hole) generate quite a bit more umph when using blank cartridges. If you use them with sponge rounds, be careful... those things move!

Hello, $25 to $30 is about right.

Bill is spot on. the barrel and stock are the key pieces. I'd sell as a lot on GB. Set starting bid at $500 with a reserve of your choice.

As for me..... I just enjoyed the pic.

Bill, can you post a link? I don't see it.

Bill, thanks for the update!

thanks for the info... always good to know.

Why don't you want to show the SN? You have the gun.... so, fuzz out the last 4 numbers and let us see the roll stamp and other markings. The value of the gun is tied to this.

Bright orange is perfect for setting the pushers apart when they are on the ground or in shrubbery area.

I guess we're not gonna get the pics....

Were you shooting FA or semi?

NIce rig! Mine is a DLO/Andrewski gun also, plenty of new in wrap mags, mag pouches, replacment parts.... and of course the necessary bayonet.