Jump to content

New Wh M1 Arrives!


Recommended Posts

After a double form 4 transfer, the new WH M1 has arrived. It was a pleasure to find one unfired in the original box with all of the paperwork and tags. I quickly switched out the unmarked M1A1 style bolt for a new condition Savage manufacture M1 bolt from IMA.

Haven't fired the beast yet.

Now off to PK to bring the gun to GI specs and to make it resemble an early GI M1, with plain, flat pivot and safety, non-cross bolt stock, and plain Lyman "L" rear sight. Finish will be blued.

The gun seems fairly well made, except for roughness in the feed ramp and inside of the ejection port. The trigger pull is VERY heavy, and the front sight (marked AOC) is not pinned. Most internals are new condition original GI.

Best regards and wishes for a great 2004!

MVC_008S.JPG

Link to comment
Share on other sites

TSMGguy: Congratulations on your new arrival! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif How long did the double form 4 transfers take? The wait must have seemed forever. Any glitches we should be warned about? http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/unsure.gif
Link to comment
Share on other sites

Hawksnest: The nine month wait for this TSMG is the second longest nine month wait I've ever endured! The seller was actually acting as a middle man between the original owner and my dealer here in Texas. He insisted on a form 4 transfer, rather than a much faster form 3 transfer. That was the first three months. I submitted my form 4 the very day that the first transfer arrived approved. After three months, it was kicked back for lack of a "citizenship certification", which neither I nor my dealer knew about! A further three months went by until approval. All well that ends well!

MVC_007S.JPG

Link to comment
Share on other sites

Congratulations, TSMGguy. Do you plan to shoot it before PK works on it? Are the WH bolts so different from a surplus bolt? I ask that because I got mine a couple of weeks ago and it still had the WH bolt. The dealer said he thought the previous owner had swapped them out. What parts on the M1A1 must be replaced to ensure reliability? I plan to shoot mine in a couple of weeks and make any necessary adjustments based on its performance. I'm also interested in finding out how to identify certain internal parts as original military surplus or postwar fodder? Anyway, best of luck with the new tommy! I know how excited you must be. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif
Link to comment
Share on other sites

Jay Baker:

Sounds like you just got one of these as well?

I will shoot the beast before sending it off to PK, if for no other reason than just to see how much better it works on its return.

I hope PK will see this and wade in on the WH M1A1 bolt question. I understand that the WH bolts can be badly out of spec. Just holding the WH and Savage produced bolts next to each other, I can see obvious differences, including that the WH bolt is about 1/16" longer than GI. Then there's the safety question: the firing pin on the M1 bolt does not protrude past the bolt face until the front of the bolt nearly makes contact with the receiver. Cartridges thus cannot be fired by the firing pin when slightly out of battery, as occasionally happens with M1A1 style bolts.

Original parts can be pretty easy to identify; most will have the manufacturer's stamp, generally "S" or "AOC". There were other subcontractors as well. The post war parts on this gun include the sear, trip, and magazine catch. All are rather crudely cast, and have a reddish-purple color, making them easy to spot without even having to look for the maker's marks. The front of the trip where it catches the bolt is especially rough, producing an extremely heavy trigger pull. I would worry about this damaging the slot in the bolt, and so will not try to fire the gun until the WH parts are all replaced with GI, which is easily done.

Link to comment
Share on other sites

TSMGguy,...Congrats!...We are all pretty much NFA here, so we know about waiting and paper foulups.IMO you should try to fire it before you send it to PK, that way it won`t be so hard to part with it for 4 more months.If it is any thing like my WH28,don`t waste your time trying to make it work,I tried for 6 months and no go.Mine was unfired and a POS!,even after swapping out all the internals. The military and Colt butt stocks wouldn`t even slid on the frame,... that`s how poorly they are machined.I`m not trying to bum you out..just trying to save you some time and grief.My transfer also was kicked back.... citizen paper,treasury to justice new forms,etc.It`s a good thing it was not my first NFA,... Soooooo...test fire,call PK and say hello to my lil`freind... my WH28 is already there.KEEPEM`SMOKIN`,out. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/wink.gif
Link to comment
Share on other sites

Great looking M1. I only have one complaint. Why did you lay it on the rocks to take a picture! AAAAGH! Mine have their own blanket to lay on when I'm out if I don't have a stand.

 

Link to comment
Share on other sites

Thompson on the rocks -- I'll have a double, please! Actually, the gun is held up off of the rocks by a hunk of dark colored closed cell foam. After I had finished "posing" the gun, I dashed inside to get the camera. I came back outside to find the dog sniffing the gun. If he had lifted his leg. . . well, I would have missed that dog!
Link to comment
Share on other sites

Congratulations on the new arrival! I wish I had one! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif Regards, Walter
Link to comment
Share on other sites

TSMGguy, I went back and re-read your post. I see that you have the M1 bolt. Big difference compared to the M1A1. I saw Frank's article in SAR about the early bolts having a faster cycle. Looks like I'll be looking for a new bolt, at least!
Link to comment
Share on other sites

Jay Baker, try IMA. The M1 bolt that they sent me was in perfect condition, and included the extractor, firing pin, firing pin spring, hammer, hammer spring, and hammer hinge pin. I couldn't have been happier with the purchase.
Link to comment
Share on other sites

I have a question, the hammer abutment point on the M1 (and for that matter, the 1921/28)...Was this area hardened especially for the wear and tear of the hammer hitting it? and is this area hit by the M1A1 bolt too?
Link to comment
Share on other sites

M1A1 Bolts: Those made by A/O WH were of very poor quality and I would not recommend firing a single round or even letting the bolt go home forcefully in a gun outfitted with one. Not all were overly long, but I have encountered two that were long enough to reach the chamber end of the barrel and cause damage severe enough to stop function. Most other dimensions are not good but also not as damaging.

 

Many of the problems encountered and corrected in WH M1’s are in the (incomplete) machining of the receiver. I have seen bolt pockets that were twisted, over size, undersize or had corner radiuses that would not let the buffer seat except on the edges, among other things. All of this and more can be corrected or accounted for, but can cause a lot of grief in the mean time.

 

The hammer in the M1 contacts the inside of the receiver at the same point as does a 28 model. No special hardening is done to the receiver at this point. It does wear and can be rebuilt, but I have not seen a gun that required it to be done due to normal wear & tear. I have rebuilt this area on guns that were undersized from the factory.

 

Link to comment
Share on other sites

I would not shoot ONE round thru the WHM1 until PK looks at it! My WHM1 was new in the box & here are some of the problems PK found: loose barrel, cast magazine catch, bolt was too long & damaged the inside of my chamber, the inside of the receiver was machined roughtly, & the forearm gripmount broke!!!! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/sad.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/sad.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/sad.gif PK fixed all the problems & even installed a G.I. rear sight inplace of the WH cheapo that was on it (it was a AOC from my parts kit). The gun is the most relieable gun I own!!!! http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/laugh.gif It is even better than my S&W 9mm pistol (wish I could carry it for my conceal/carry gun). Enjoy the heck out of it!!! P.S. The ammo I shoot in it that works all the time is Seller & Bellot & Armscor. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...