06AngusSG Posted March 27, 2015 Report Share Posted March 27, 2015 (edited) Hi Fellas, I know this could apply to the FA side of the switch but being a SA owner only I decided to put it here.I don't know if this will be a duplicate topic but I have not searched all of the archives yet to see if there is info in here about these. the way I got turned on to loaders like this was watching an old video of one of the Ta Ta Shows. There was like a 1/2 second flash of one of these in use. I'll bet I watched that stupid clip over 50 times to make sure I got the full concept on how to make one of these. I did say make because I did make the following. Partially due to not being able to find anyone who produces them and partially due to me liking to make my own things if I can. Though marked to take 15 rounds it will actually hold and load 20 at a time. I'm not sure how much interest there is in these but I know how long mags take to load and anything to make it quicker appeals to me. I can only imagine how many more mags a FA owner could go through on a range day... That being said if there is interest enough in these I might make some to sell on Gun Broker since I lack the Member status to sell them here. Please tell me what you think. Thanks Jon Here's a YouTube link of it in action: Now on to the pics: Edited August 28, 2015 by 06AngusSG 1 Link to comment Share on other sites More sharing options...
Kilroy Posted March 27, 2015 Report Share Posted March 27, 2015 That's pretty cool. I'd be interested in one. Probably only work with Thompson mags and not reising mags right? Link to comment Share on other sites More sharing options...
laurencen Posted March 27, 2015 Report Share Posted March 27, 2015 pretty neat, like the handle Link to comment Share on other sites More sharing options...
timkel Posted March 27, 2015 Report Share Posted March 27, 2015 I could use one too. Link to comment Share on other sites More sharing options...
06AngusSG Posted March 28, 2015 Author Report Share Posted March 28, 2015 That's pretty cool. I'd be interested in one. Probably only work with Thompson mags and not reising mags right?Kilroy I'm not sure. I've never seen a Reising mag. I did design this around Thompson mags. Link to comment Share on other sites More sharing options...
Kilroy Posted March 28, 2015 Report Share Posted March 28, 2015 I don't think it would work with the reising mags because they are double stack into a single feed and in order to get the rounds in you have to push in and slide back, I think the double motion would prevent this from working with those mags. I'd still be interested in one though if you choose to make and sell. Link to comment Share on other sites More sharing options...
T Hound Posted March 31, 2015 Report Share Posted March 31, 2015 How much are they going to go for? Link to comment Share on other sites More sharing options...
06AngusSG Posted March 31, 2015 Author Report Share Posted March 31, 2015 How much are they going to go for?I'm not exactly sure how much I'll ask. Honestly I don't have the first clue as to what they're worth to people. I have decided to make and sell a few but I'm not wanting to cross any lines on the forum here as to "selling" guidelines. So when I have them ready I'll ask Dalbert if I can put the gunbroker link here. Link to comment Share on other sites More sharing options...
Howard Posted July 9, 2015 Report Share Posted July 9, 2015 Hi, So, what is the current status of this very cool mag loader? I would definitely be interested in one. It is amazing how ammo hungry these guns are! Link to comment Share on other sites More sharing options...
Motorcar Posted July 9, 2015 Report Share Posted July 9, 2015 Well that's pretty neat. I've seen them on other style mags but yours is really nice. Link to comment Share on other sites More sharing options...
06AngusSG Posted July 10, 2015 Author Report Share Posted July 10, 2015 Hi, So, what is the current status of this very cool mag loader? I would definitely be interested in one. It is amazing how ammo hungry these guns are! The bummer is since it helps you reload so much faster and easier I find I go through more ammo when I take it out.... I've gotten really busy at work and have had no personal time to make anymore at the moment..... Life can get you like that. I DO still plan to make some but it'll have to be when I get a chance. Jon Link to comment Share on other sites More sharing options...
Howard Posted July 19, 2015 Report Share Posted July 19, 2015 Hi Jon, I understand about the time thing...not enough hours in the day. When you get to the point of being able to make these again, please keep me in mind. Thanks! Link to comment Share on other sites More sharing options...
hrt4me Posted September 4, 2015 Report Share Posted September 4, 2015 I would like to buy one please Link to comment Share on other sites More sharing options...
06AngusSG Posted September 4, 2015 Author Report Share Posted September 4, 2015 I would like to buy one pleaseSure! I'm currently working on 4 that should be done next week.PM me your email and I'll let you know when they're done. Thanks, Jon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now