Dave Janowski Posted August 8, 2003 Report Share Posted August 8, 2003 OK guys, the kits are ready! Link to comment Share on other sites More sharing options...
Dave Janowski Posted August 8, 2003 Author Report Share Posted August 8, 2003 Wow this board is fast! Anyhow the kits are ready but I can not sell ANY until my incorporation goes through! My attorney has told me if I were to sell any without being incorporated I would be a very foolish individual, and as of now he has never left me out to dry! Sorry I have not been on the board too much I had a Hernia that needed some surgery, a word of advice DO NOT THINK you are still 18 and bullet proof! Damn that surgery hurts like hell! So guys thanks for all of your iunquiries, and just hang in there I dont know how long it takes to incorporate, but the application has been sent in a few weeks ago! Guys , the wait will be WELL worth it! Dave Link to comment Share on other sites More sharing options...
M1tommygun Posted August 8, 2003 Report Share Posted August 8, 2003 YEE HAAA! Sign me up for a spring kit for my M1. Hopefully, the incorporating won't take as long as it is to get my paperwork to register a SBR from the ATF. I am glad you are recovering from you surgery. My father-in-law had the same surgery a couple of years ago, and he would agree with you about the pain. I was starting to wonder if I was going to end up with a popeye right arm from pulling the bolt back on my M1 http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif. Glad you are back. Scott Link to comment Share on other sites More sharing options...
LIONHART Posted August 8, 2003 Report Share Posted August 8, 2003 Good to see you back on the board David! Hope that you'll make a speedy recovery! Link to comment Share on other sites More sharing options...
Walter63a Posted August 8, 2003 Report Share Posted August 8, 2003 Get well soon Dave. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif Link to comment Share on other sites More sharing options...
Sgt Posted August 8, 2003 Report Share Posted August 8, 2003 Dave-- Glad you are doing better and back on board. You're right about that age thing. You can count me in for a spring set when the paperwork is complete. Thanks! Link to comment Share on other sites More sharing options...
Ron A Posted August 8, 2003 Report Share Posted August 8, 2003 I am interested in a kit for a 27 m1 My best for a speedy recovery. Link to comment Share on other sites More sharing options...
Redselfloader Posted August 9, 2003 Report Share Posted August 9, 2003 I will take one for my 27A1 Get well soon Link to comment Share on other sites More sharing options...
Zamm Posted August 11, 2003 Report Share Posted August 11, 2003 Dave, Disregaurd my thread, and congrats on your sucessful surgery, hope you are feeling better. Best, Zamm Link to comment Share on other sites More sharing options...
TOMMY SMG Posted August 27, 2003 Report Share Posted August 27, 2003 Hi Dave, Have you heard anything on if your incorporation has been approved yet so you can start shipping the kits? http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/unsure.gif Hope your having a speedy recovery from your surgery http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/huh.gif and feeling better.. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/biggrin.gif Jim http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif Link to comment Share on other sites More sharing options...
TommyGunner Posted August 27, 2003 Report Share Posted August 27, 2003 Dave, Please count me in on a set for my 27. Would like to offer them on the website if you are interested. Send me an email. Glad to see you back. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/tongue.gif Damon Link to comment Share on other sites More sharing options...
Dan99Hawk Posted August 31, 2003 Report Share Posted August 31, 2003 Count me in too.. !! Thanx. Link to comment Share on other sites More sharing options...
tcgoll Posted September 1, 2003 Report Share Posted September 1, 2003 I'll take 2 M1 sets. Hernia surery is a BITCH. Have have had that and a Liver Transplant and the pain from the hernia was much worse. Get well soon Link to comment Share on other sites More sharing options...
StoryforU Posted October 10, 2003 Report Share Posted October 10, 2003 Yo Dave, How's Incorporation coming? Link to comment Share on other sites More sharing options...
nhglyn Posted October 11, 2003 Report Share Posted October 11, 2003 As soon as everything is all set, I want a set too. Email me when ready please. Link to comment Share on other sites More sharing options...
timg953 Posted October 11, 2003 Report Share Posted October 11, 2003 I need one for a 27. E-mail me with the details. Link to comment Share on other sites More sharing options...
adlake Posted October 14, 2003 Report Share Posted October 14, 2003 I'll take one for my 1927A1 as well-Adlake Link to comment Share on other sites More sharing options...
Zamm Posted October 15, 2003 Report Share Posted October 15, 2003 Dave, Good lord, ya got yerself a business going here with all us takers! Hope your doing well health wise, and all is going well with the incorperation stuff. Talk soon, Zamm Link to comment Share on other sites More sharing options...
Grey Crow Posted October 15, 2003 Report Share Posted October 15, 2003 I as well am anxiously awaiting their release. I'm far from built like a Gorilla. Those original springs are murder. Hope all is well and the legal red tape soon clears for production release. Link to comment Share on other sites More sharing options...
M1tommygun Posted October 15, 2003 Report Share Posted October 15, 2003 I emailed Dave the other day, but I have yet to hear from him yet. I hope he is doing ok. I agree with you Grey Crow, those origional springs are murder. Scott Link to comment Share on other sites More sharing options...
adlake Posted October 15, 2003 Report Share Posted October 15, 2003 I have to ask whats the principal behind this I guess I am not to smart when it comes to springs. I cannot see how you can reduce the pull and get it to chamber as well. not looking for secrets here just the thought-adlake Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now