Tiz Posted March 17, 2020 Report Share Posted March 17, 2020 If you are one of the many individuals who contacted me through a post on the board expressing an interest is a mag repair tool, please watch for a PM advising you that your tool is ready. If you receive a PM and are no longer interested please let me know that as well so I can go down the list. Thanks everyone for your interest and especially those who have already received their tool and expressed their satisfaction with it. Link to comment Share on other sites More sharing options...
Tiz Posted March 18, 2020 Author Report Share Posted March 18, 2020 bump Link to comment Share on other sites More sharing options...
Tiz Posted March 21, 2020 Author Report Share Posted March 21, 2020 bump Link to comment Share on other sites More sharing options...
Autorotate Posted March 21, 2020 Report Share Posted March 21, 2020 Received mine a few weeks back. It was well packaged and arrived shortly after Tiz (aka Carl) said it had shipped. I was pleasantly surprised and impressed with the quality and sturdiness of the magazine tool. I had a 30 round magazine with bent feed lips, that I was quickly able to straighten. I haven’t had the opportunity to test fire the magazine, but it appears to have exactly the same appearance of others I own. Would not hesitate to purchase. Well made and easy to use. Link to comment Share on other sites More sharing options...
Tiz Posted March 21, 2020 Author Report Share Posted March 21, 2020 (edited) Received mine a few weeks back. It was well packaged and arrived shortly after Tiz (aka Carl) said it had shipped. I was pleasantly surprised and impressed with the quality and sturdiness of the magazine tool. I had a 30 round magazine with bent feed lips, that I was quickly able to straighten. I haven’t had the opportunity to test fire the magazine, but it appears to have exactly the same appearance of others I own. Would not hesitate to purchase. Well made and easy to use.Autorotate, Thanks. I am glad you are pleased. Although I feel the use of the tool is pretty intuitive, diid you feel the instructions were adequate? Edited March 21, 2020 by Tiz Link to comment Share on other sites More sharing options...
Autorotate Posted March 21, 2020 Report Share Posted March 21, 2020 It was intuitive! No instructions necessary, but like to have in case I run into something unexpected. Question for you...do you recommend painting or putting any sort of coating on the tool? Link to comment Share on other sites More sharing options...
lamellarllc Posted March 22, 2020 Report Share Posted March 22, 2020 I can find the original link to the mag lip repair device , can someone please post it Link to comment Share on other sites More sharing options...
Tiz Posted March 22, 2020 Author Report Share Posted March 22, 2020 (edited) It was intuitive! No instructions necessary, but like to have in case I run into something unexpected. Question for you...do you recommend painting or putting any sort of coating on the tool?It is in the white so just wipe it down with a little oil to prevent any corrosion. I’m sure you an paint it or duracoat it if you wish but I do not think it is necessary although I did consider it. Edited March 22, 2020 by Tiz Link to comment Share on other sites More sharing options...
Tiz Posted March 22, 2020 Author Report Share Posted March 22, 2020 I can find the original link to the mag lip repair device , can someone please post it I just bumped the original post to the top. Check the pictures. If you are interested PM me and I can add you to the order list. Price is $115.00 shipping included.Thanks for your interest Link to comment Share on other sites More sharing options...
Tiz Posted March 23, 2020 Author Report Share Posted March 23, 2020 On another note, I am very close to running out of material to fabricate the tools and I am not certain when I will be able to get more steel. The local supplier is closed due to the virus, therefor there may be a delay in production until I can get more material. I will keep everyone informed with posts on the board. Keep an eye on your PM's if you are on the list. I have sent several PM's to members and gotten no reply, please let me know if you are no longer interested so I can go to the next interested party. Stay safe.Tiz Link to comment Share on other sites More sharing options...
Tiz Posted March 27, 2020 Author Report Share Posted March 27, 2020 More steel arrived today production will resume. Watch your PM's Link to comment Share on other sites More sharing options...
Tiz Posted March 28, 2020 Author Report Share Posted March 28, 2020 bump Link to comment Share on other sites More sharing options...
45PCC Posted April 3, 2020 Report Share Posted April 3, 2020 PM you. Thank you! Link to comment Share on other sites More sharing options...
Tiz Posted April 15, 2020 Author Report Share Posted April 15, 2020 I have been sending out PM's to those who have previously expressed interest in my Mag feed lip repair tool, however it appears that several PM's have gone unread. Please check for a PM if you originally expressed a desire to purchase one of the tools and let me know if you still want one. I have about 20 tools made and ready to go which comprises enough to cover preorders with some left over for anyone who would like one and did not initially express interest on the initial post. If you are someone who desires one of these tools, pictures appear on the original post. Let me know. Feed back has been awesome and I am gratified to be of service to the Thompson community and fellow board members. Everyone be safe. No Covid 19 in our area, only 2 cases in the entire County. BestTiz Link to comment Share on other sites More sharing options...
ccsteele Posted April 28, 2020 Report Share Posted April 28, 2020 I received my magazine tool today and just wanted to let you know that it works perfect and as far as I’m concerned it is a work of art thank you very much .Charles Link to comment Share on other sites More sharing options...
Tiz Posted April 28, 2020 Author Report Share Posted April 28, 2020 I received my magazine tool today and just wanted to let you know that it works perfect and as far as I’m concerned it is a work of art thank you very much .CharlesCharles,I am thrilled you are pleased, customer satisfaction is certainly paramount. Thanks for the feedback.To date all orders have been filled however, i still have a limited number of feed lip tools available from the second production run if anyone is interested and was not on the pre-production order list. PM me if you want one. Thanks to everyone, It is a pleasure to serve the Thompson Community. Tiz Link to comment Share on other sites More sharing options...
gijive Posted April 28, 2020 Report Share Posted April 28, 2020 I received my magazine tool today and just wanted to let you know that it works perfect and as far as I’m concerned it is a work of art thank you very much .CharlesCharles,I am thrilled you are pleased, customer satisfaction is certainly paramount. Thanks for the feedback.To date all orders have been filled however, i still have a limited number of feed lip tools available from the second production run if anyone is interested and was not on the pre-production order list. PM me if you want one. Thanks to everyone, It is a pleasure to serve the Thompson Community. TizPM sent. Link to comment Share on other sites More sharing options...
Steve45 Posted February 4, 2023 Report Share Posted February 4, 2023 I know this is an old topic but I am interested in your mag tool. Please let me know if you still make them and if there has been a price change and how you would like payment. Thanks, Steve45 Link to comment Share on other sites More sharing options...
Tiz Posted February 5, 2023 Author Report Share Posted February 5, 2023 Steve45. I will send a PM. I think I may have one or two still in inventory. Link to comment Share on other sites More sharing options...
Dpedersen Posted February 6, 2023 Report Share Posted February 6, 2023 If ya got more than 1, I’m interested as well! Link to comment Share on other sites More sharing options...
peter kohler Posted February 6, 2023 Report Share Posted February 6, 2023 so far ive used this tool on about 45 mags. 40 of my own and 5 for a friend. i just use a ream to open the slot where the bolt goes in its very hard to see where any metal has actually been removed so the bolt can be inserted. i also bought a small brass hammer from harbor freight that works nicely. Link to comment Share on other sites More sharing options...
Tiz Posted February 8, 2023 Author Report Share Posted February 8, 2023 Oh my, looks like might have to get back in the shop and get to work. Peter thanks for the testimonial. Link to comment Share on other sites More sharing options...
Tiz Posted February 8, 2023 Author Report Share Posted February 8, 2023 On 2/5/2023 at 7:17 PM, Dpedersen said: If ya got more than 1, I’m interested as well! I will let you know. Stay tuned. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now