Reising suppressor adapter

[Abody71]

After checking the threading on my Reising, they are concentric enough to run a suppressor. I need to find a 7/8x24 to 5/8x24 adapter to mount the suppressor. I will be using the SG-2 from Thompson Machine.

I checked with Bowers as mentioned in another post. They didn't have one nor was interested in making one. The only other option is to rethreading the barrel to 5/8x24 which would mean I could not remount the compensator.

Any other suggestions on how to mount the suppressor?

[Bridgeport28A1]

I believe Frank I. also wrote an article on suppressing a Reising for Small Arms Review. I was not able to find a link for the article..

 

Edited December 4, 2022 by Bridgeport28A1

[StrangeRanger]

Make a drawing. Find someone with a lathe. 

 

[reichstall]

yes spinning one out on a lathe would be pretty much straight forward. any machine shop would be able to do it.

 

[skoda]

I had a Bowers can on mine with a Bowers adaptor. Concentricity wasn't a problem but the can is long so the gun overall was really long and I didn't like it. For a front sight I used a Mauser extra high sight.

[Frank Iannamico]

Here is a link to the Reising Suppressor article, to find old articles you have to click on the "Archives" tab. It will ask for a password, but you don't need one.

https://archive.smallarmsreview.com/display.article.cfm?idarticles=4066