Mad Machinist Posted March 23 Report Share Posted March 23 (edited) Does any one have an MP40 trunnion with a piece of tube.....I have aquired a saw cut reciever section that is missing the trunnion and about 1.187 to 1.250 of the tube where the trunnion fit....I have spare trunnions and can probably machine a patch.......but just thought I'd check here.....I have spare barrel nut/trunnion sets if someone needs for a Philly Ordnance tube.....and a few other miscellaneous parts if someone needs. Edited March 23 by Mad Machinist Link to comment Share on other sites More sharing options...
Mad Machinist Posted March 24 Author Report Share Posted March 24 (edited) Realized the trunnion on an MP41 kit had what I needed.....made a support fixture for the tube and a mandrel/driver for the trunnion.......heated the braze metal to molten and tapped the trunnion out of the tube remnant.....both pieces 100% undamaged......😀  Edited March 24 by Mad Machinist Link to comment Share on other sites More sharing options...
Rekraps Posted March 27 Report Share Posted March 27 This guy owns a 32 acre underground machine shop. Link to comment Share on other sites More sharing options...
Mad Machinist Posted March 30 Author Report Share Posted March 30 (edited) Got the two together.....and while it will be very usable.....the MP41 tube doesn't quite match the the MP40 in the seam where the flat was rolled......I can make it match but would prefer something I don't have to......so I'm still looking.  If someone has a front section that would allow me to cut it inder the rear magwell band......would allow a reweld that would be damn hard to spot  Rekraps......Not quite that big LOL Edited March 31 by Mad Machinist Link to comment Share on other sites More sharing options...
Mad Machinist Posted May 7 Author Report Share Posted May 7 (edited) YEAAAAAAAAAAAAA!!!!!!!!!!!!! found an overlapping section that will allow a reweld under the rear magwell band....and matches finish wise..... Â Edited May 7 by Mad Machinist Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now