Jump to content

Can you give me information from the serial number?


Recommended Posts

7 hours ago, Chappy said:

Got Uzi

I can see that the receiver is solid. The reweld is actually a good job but would like to look from other angles. What surprises me is that why would a trigger frame be cut in the forst place. I have etra M1 trigger frames from when iI was stocking up on parts kits so the issue for me is:

1. Why cut a trigger fame?

2. Why go to the time and expense of welding when they are plentiful on the secondary market?

There were periods in the 1970-80’s prior to the many parts kit imports, when M1 Thompson Trigger Frames were fairly scarce and pricey. Welding up demilled parts was simply an option to obtain a needed part at that given time. 

Link to comment
Share on other sites

TSMGguy -I understand that personal inspecion would be best but I also live 100 miles away from an airport and after the TSA bully boys I will not fly anymore. After Covid (I was a federal contractor) I have pretty much given up on most people and prefer to stay in West Texas or Oklahoma. So I rely on the expertise of RIA and the high fees of Morthy. At least with RIA there is an examination period. I do expect some things to be missed but not outright fraud by the seller. Take a look at the item below. If it is found to be misrepresented and an excellent fake, then their is recourse. Too many on this forum expect faults and phonies and say you need to see it to believe it. In a digital world that is not always possible. Internet auctions have exploded and opened the country to national pricing and absentee buying. We need to be able to trust yet have recourse.

https://www.bidsquare.com/online-auctions/dumouchelles/perret-geneve-swiss-diamond-enamel-14-kt-yellow-gold-ladys-revolving-watch-l-7-dia-1-5-5614987?_hsmi=285598382

Link to comment
Share on other sites

It's obvious from the Form 4 that JEC is the applicants initials and he made the receiver. No doubt that this was manufactured in 84-85 and the auction company should have known as it is plain as day on the form. The seller used the A/O name  which was a copyright infringement but it is plain that he made this as a gun for himself some 40 years ago.


At the request of the auction house the forms have been taken down.

Edited by Chappy
Link to comment
Share on other sites

After seeing the forms, IHMO the auction house royally screwed the pooch and 110% misrepresented the gun and IMHO should eat the listing and refund any moneys spent.  Yes the buyer should have looked closer and noticed something was off, but the auction house is flirting with fraud as to the way they listed it.

Auction houses like to get creattive to get unknowing buyers...RIA does this with their made up "A" designation catgory when they list a West Hurley Thompson.  They rarely say the words "West Hurley" but they will call it an "A" designation Thompson and hope no one is the wiser to the game they are playing then spend big money on it.  I question if that hasnt been the case with some of the WH guns sold at RIA for more than USGI ones....

  • Like 1
Link to comment
Share on other sites

3 minutes ago, Got Uzi said:

 I question if that hasnt been the case with some of the WH guns sold at RIA for more than USGI ones....

Or fools who want a nice pretty one as opposed to one that looks like it's been through a war.

Link to comment
Share on other sites

Got Uzi

Auction houses like to get creattive to get unknowing buyers...RIA does this with their made up "A" designation catgory when they list a West Hurley Thompson.  They rarely say the words "West Hurley" but they will call it an "A" designation Thompson and hope no one is the wiser to the game they are playing then spend big money on it.  I question if that hasnt been the case with some of the WH guns sold at RIA for more than USGI ones....

 

I never thought about what you wrote. That is true abou the listing and since I knew of the WH issues it never dawned on me that they were trying to get one over on the buying public. I saw this being done on their just concluded auction. Good point.

 

Link to comment
Share on other sites

3 hours ago, Chappy said:

Inertord, thank you for the info. What I don't understand is why cut a lower when it isn't a controlled part?

That was a demill method used by the US Military at one time, saw or torch cut(s) thru both the receiver and frame and usually everything in between. Demilled parts were then auctioned as scrap. Just part of a military demill standard used at a certain point in time. 

Edited by inertord
  • Like 1
Link to comment
Share on other sites

Quick research showed the former owner is in his 80s. He may still be alive as I did not spend much time searching. Why don't you call him and find out firsthand about this Thompson submachine gun. If it runs, it may not be a bad deal at 15K. You most likely will not find one cheaper (but it needs to run). If you decide to keep it, perhaps bargaining with the auction house over the buyer's premium may be in order. It appears to me you have several options. The first decision is whether to buy it. Information from the prior owner and manufacturer may prove useful in making that decision. 

Link to comment
Share on other sites

1 hour ago, Got Uzi said:

After seeing the forms, IHMO the auction house royally screwed the pooch and 110% misrepresented the gun and IMHO should eat the listing and refund any moneys spent.  Yes the buyer should have looked closer and noticed something was off, but the auction house is flirting with fraud as to the way they listed it.

Auction houses like to get creattive to get unknowing buyers...RIA does this with their made up "A" designation catgory when they list a West Hurley Thompson.  They rarely say the words "West Hurley" but they will call it an "A" designation Thompson and hope no one is the wiser to the game they are playing then spend big money on it.  I question if that hasnt been the case with some of the WH guns sold at RIA for more than USGI ones....

Agree!!

Link to comment
Share on other sites

Chappy,

I've also spent a lot of money at RIA, and while you might think you're a good customer at RIA, I can tell you from personal experience they use "as is, where is" to their full advantage.  I bought a high dollar accessory from them at one point they described as "original"  They would not take it back.  They refunded my shipping charges.  I've spent 6 figures there.  Buyer beware.  They have NO ONE there that knows anything about NFA guns, other than what they look up in books and online.  They struggle with transfers, so I take care of that myself since they have failed miserably on numerous form 4's.  Now that they have moved I suspect it will be worse?

Link to comment
Share on other sites

So to update. The auction house has noted they made a mistake. Yje offer is to remove all buyer premiums and sell for $1,5000. I believe I will forgo the deal and wait for a decent pre-may M1.

I want to thank all of you for your assistance. This all started with asking about the s/n thinking you could give me some insight. Insight I did receive. I leave you, hopefully a little wiser and more leary.

Be well. Merry Christmas to you and yours,

Chappy

Edited by Chappy
Link to comment
Share on other sites

Glad it’s all going to work out. While I have a pair of pre sample M1 type now, a transferable shooter for $15k I wouldn’t look past even if it’s not a WWII gun. Odds are it’s better steel than what was used in the WH M1 guns and would be a better long term shooter. 

Link to comment
Share on other sites

On 12/7/2023 at 10:32 AM, TD. said:

May I suggest you purchase Frank's excellent book, American Thunder, Third Edition, while waiting for the transfer. It is the authority on all WW II Thompson submachine guns. It is available on Amazon.com at a great price and probably directly from Frank if you want an autographed copy. Private Message (PM) Frank and ask him. This book should be in every Forum member's library. Period. 

Chappy,

I am happy everything worked out to your satisfaction. My initial advice as to buying Frank's book is still valid, especially if you are going to buy another M1 Thompson submachine gun. It will be the best 40 bucks you spend in the Thompson community. But if you decide to buy a Colt, I have another book in mind 😁

Good luck!

Link to comment
Share on other sites

If I was sitting in a better position (and not having just secured another Thompson on Friday) I'd have told you to finish the deal and I'd take it off your hands.

 

I do agree it'll be interesting to see how the auction company lists it a second time

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...