jld3713 Posted September 2, 2024 Report Share Posted September 2, 2024 (edited) Firing pin for 1927a1 thompson, round pin or square pin. Milled from solid steel and not punched out from flat steel and uneven. Easily installed and ready to fire after a little filing on sear height. Selling them for $35 each. Milling them from harder steel also prevents stress cracks from being punched out. Will fit all models of AOWH and Kahr bolts. Edited September 30, 2024 by jld3713 Link to comment Share on other sites More sharing options...
peter kohler Posted September 11, 2024 Report Share Posted September 11, 2024 ill take one pm me for payment Link to comment Share on other sites More sharing options...
anticus Posted September 15, 2024 Report Share Posted September 15, 2024 I’ll take three if available. Link to comment Share on other sites More sharing options...
TennesseeTimmy Posted September 16, 2024 Report Share Posted September 16, 2024 I’m in for one. PM me for payment arrangements. Thanks Link to comment Share on other sites More sharing options...
68coupe Posted September 16, 2024 Report Share Posted September 16, 2024 I'm in for one of the current Kahr style. I sure would like to have a quality spare. I haven't had a broken firing pin since I started relieving all of the stress from the stamping. I use my rotary tool to knock off the edges and polish them so that only flat or rounded surfaces make contact with the inside of the bolt or sear block. Please PM me with payment info. Karl, 68coupe Link to comment Share on other sites More sharing options...
TennesseeTimmy Posted September 25, 2024 Report Share Posted September 25, 2024 Firing pin received today. Interesting to see one without the rolled / sharp edges on the ones Kahr stamps out. Feels good to have a spare. Thanks. Link to comment Share on other sites More sharing options...
ACARLG Posted September 29, 2024 Report Share Posted September 29, 2024 PM sent Link to comment Share on other sites More sharing options...
TtheD Posted October 2, 2024 Report Share Posted October 2, 2024 (edited) Still available? Interested, I think I need the flat style, I am a bit of a noob. Is there more than 1 style of flat? V/r Edited October 2, 2024 by TtheD Link to comment Share on other sites More sharing options...
jld3713 Posted October 3, 2024 Author Report Share Posted October 3, 2024 On 10/2/2024 at 7:00 AM, TtheD said: Still available? Interested, I think I need the flat style, I am a bit of a noob. Is there more than 1 style of flat? V/r There is a square pin and then there is a round long pin on the end. Depending on year and manufacturer Link to comment Share on other sites More sharing options...
jld3713 Posted October 3, 2024 Author Report Share Posted October 3, 2024 On 9/25/2024 at 6:19 PM, TennesseeTimmy said: Firing pin received today. Interesting to see one without the rolled / sharp edges on the ones Kahr stamps out. Feels good to have a spare. Thanks. Hope you are pleased with it. Any issues or questions feel free to contact me. I will stand behind every pin I make. Link to comment Share on other sites More sharing options...
anticus Posted October 3, 2024 Report Share Posted October 3, 2024 Nicely made . These will make great spares and definitely superior to original equipment. Link to comment Share on other sites More sharing options...
ghostintheshell Posted October 11, 2024 Report Share Posted October 11, 2024 I'll likely order 2 probably later this month. Link to comment Share on other sites More sharing options...
robth100 Posted April 8 Report Share Posted April 8 New to the board and late to this topic but interested in 3 pins if available. Thank you! Link to comment Share on other sites More sharing options...
DARIVS Posted April 9 Report Share Posted April 9 Just found this thread. I'd like to buy one also! Link to comment Share on other sites More sharing options...
The Oracle Posted April 14 Report Share Posted April 14 I'm new to the forum, If still available, I would like to get one. My girl has the round firing pin🙂 Link to comment Share on other sites More sharing options...
Gibbs2600 Posted May 4 Report Share Posted May 4 Im new to the forum too. I have a 1979 made West Hurley. Not sure which type of pin I need because mine broke and I cant see what the end looked like. Please let me know if they are still available and I will take one if you know which one the 79WH takes. Thanks! Link to comment Share on other sites More sharing options...
anticus Posted May 4 Report Share Posted May 4 The WH has a square pin. Link to comment Share on other sites More sharing options...
Gibbs2600 Posted May 4 Report Share Posted May 4 Thanks. I would like to get one if they are available. Please pm me how to pay etc. Thanks again! Link to comment Share on other sites More sharing options...
jld3713 Posted June 9 Author Report Share Posted June 9 Sorry guys. I have not gotten any notices from the website. Yes they are available. But at the moment the tooling is not set up for them. I sent some out but it looks like they have not been received. Not sure what’s going on with the mail lately. If you have paid please let me know so we can get this taken care of. For the new orders let me get retooled and get them cut first. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now