jld3713 Posted October 4, 2024 Report Share Posted October 4, 2024 Hello my fellow Tommy owners. Have some good news for the A1 shooters! I am taking orders for the knurled 1928 style cocking knobs as a direct replacement for your 1927A1. No modifications or fitting needed. Featuring the classic style round knob with the side knurling. We are also taking it one more step, a choice of finishes currently 3 available. And two style of knobs. Knurled or smooth with a choice of classic blued finish, Parkerized black, black oil finish. taking preorders for standard knobs is $65 shipping included. All parts are made on cnc machine with hand finishing. Heat treated and tempered for durability. Orders will be filled in order they are received. contact for pay info for PayPal. 1 Link to comment Share on other sites More sharing options...
M40scoutsniper Posted October 6, 2024 Report Share Posted October 6, 2024 Put me down for a knurled blued one brotha! 🤘🏼 Link to comment Share on other sites More sharing options...
jld3713 Posted October 6, 2024 Author Report Share Posted October 6, 2024 Will do. Retooling machine this weekend. Will let you know when ready to ship. Link to comment Share on other sites More sharing options...
ghostintheshell Posted October 7, 2024 Report Share Posted October 7, 2024 (edited) I'm new here to the board, but I have a newer 1927A1, but please message me the info. I'll grab one knurled blued handle, and thank you very much! Edit: typo Edited October 7, 2024 by ghostintheshell Link to comment Share on other sites More sharing options...
TennesseeTaylor95 Posted October 22, 2024 Report Share Posted October 22, 2024 I don't know if I can still get in on the list but I sent a message in case any are still available. Link to comment Share on other sites More sharing options...
jld3713 Posted October 23, 2024 Author Report Share Posted October 23, 2024 yes, i have been swamped lately. finally got machined retooled. they sent the wrong parts. So i didnt forget about anybody. my wife also took a nasty spill and broke both of her wrists so i was a little busy for a few days. Have them cut just have to make the last few details and i will get them shipped out after coloring. Thanks guys Link to comment Share on other sites More sharing options...
anticus Posted October 24, 2024 Report Share Posted October 24, 2024 Oh wow, hope your wife heals up quick. Link to comment Share on other sites More sharing options...
Countryboy77 Posted October 31, 2024 Report Share Posted October 31, 2024 Are there any more availible? Link to comment Share on other sites More sharing options...
jld3713 Posted November 1, 2024 Author Report Share Posted November 1, 2024 21 hours ago, Countryboy77 said: Are there any more availible? yes message sent Link to comment Share on other sites More sharing options...
jld3713 Posted November 2, 2024 Author Report Share Posted November 2, 2024 hey guys! just a quick update, First off thanks for everybody that has reached out about my wife. she has had surgery and is on the upstroke to recovery so for now i have to be her hands. which means there is minimal complaining about the food, lol but yet i am used to being told what to do while she watches anyways the only difference is that now she cant throw things at me to get my attention. It just takes a little more time out of the shop. But i have everybody on a list and parts will be rolling out again quickly. Anyhow onto the fun stuff, i have not forgotten anybody about the parts just been super swamped with work and her injury. However i want to thank the guys who have helped develop the charging knobs and given feedback. I apologize for the length of time it takes to get them made. I have some sent out this week and will work on getting the others completed this weekend now that i have a little help. Keep the comments and ideas coming also any other ideas for parts you can think of shoot them my way and lets see whay we can come up with. A huge shout out to Dan Block who has an amazing amount of knowledge and experience who has been an invaluable help in this endeavor. by the way if somebody could tell me how to upload a pic to this thread i would be greatful. So you guys can see what your getting. 1 Link to comment Share on other sites More sharing options...
TennesseeTaylor95 Posted November 2, 2024 Report Share Posted November 2, 2024 I'm glad to hear things are going well with your wife's recovery. I am not the most well versed in the forum, but if you are using the mobile version of the forum, adding a photo is as simple as clicking the "Add Files" button that I highlighted in red in the photo. You'd just need to pick the file that's already on your phone or take a photo using your camera. The photo should be able to be previewed below your text response before submitting your reply. I hope this helps explain the process to upload some photos to the thread. Link to comment Share on other sites More sharing options...
jld3713 Posted November 2, 2024 Author Report Share Posted November 2, 2024 13 minutes ago, TennesseeTaylor95 said: I'm glad to hear things are going well with your wife's recovery. I am not the most well versed in the forum, but if you are using the mobile version of the forum, adding a photo is as simple as clicking the "Add Files" button that I highlighted in red in the photo. You'd just need to pick the file that's already on your phone or take a photo using your camera. The photo should be able to be previewed below your text response before submitting your reply. I hope this helps explain the process to upload some photos to the thread. i tried that but it would not upload. can we add our email address here or is that against forum rules? ill try again, maybe i did something wrong. Link to comment Share on other sites More sharing options...
ghostintheshell Posted November 4, 2024 Report Share Posted November 4, 2024 I hope your wife is getting better and thank you for the update. You can also upload pictures by using a link by uploading the picture to imigur at https://imgur.com/t/upload Link to comment Share on other sites More sharing options...
ghostintheshell Posted November 22, 2024 Report Share Posted November 22, 2024 Oh I wanted to also ask, if there was any way for making a proper rear Lyman sight replica with the windage adjustment? Link to comment Share on other sites More sharing options...
jld3713 Posted November 23, 2024 Author Report Share Posted November 23, 2024 it would take quite a bit of work. Let me gwt the knobs caught up and then ill visit that project 1 Link to comment Share on other sites More sharing options...
jld3713 Posted November 23, 2024 Author Report Share Posted November 23, 2024 OK guys here we go!! Thanks to all who have helped develop this item.It was several weeks of trial and error but here we are. For those that have orders they are now being filled. We had some made up and when we were testing we ran into an issue so instead of sending them out and having them not work correctly we went ahead and fixed the issues. They will be colored and treated upon arrival. Keep the ideas coming and we will keep running with them. A huge shout out to Dan Block for helping me with this project. Very knowledgeable and great to work with! Link to comment Share on other sites More sharing options...
jld3713 Posted November 23, 2024 Author Report Share Posted November 23, 2024 3 1 Link to comment Share on other sites More sharing options...
deerslayer Posted November 23, 2024 Report Share Posted November 23, 2024 Looking good! Link to comment Share on other sites More sharing options...
M40scoutsniper Posted November 24, 2024 Report Share Posted November 24, 2024 Looks super good! 😎🤘🏼 Link to comment Share on other sites More sharing options...
jld3713 Posted November 24, 2024 Author Report Share Posted November 24, 2024 1 Link to comment Share on other sites More sharing options...
jld3713 Posted November 24, 2024 Author Report Share Posted November 24, 2024 Finally caught up with orders, everybody will be getting there parts this week. Or at least on the way Link to comment Share on other sites More sharing options...
WrenchNHammer Posted January 15 Report Share Posted January 15 Sorry to have been away from this forum for a while - and missed out on this. Is there any way you either have one more on hand or would you be making more in the future? Link to comment Share on other sites More sharing options...
jld3713 Posted January 19 Author Report Share Posted January 19 Yes more is being made at this time. sent pm Link to comment Share on other sites More sharing options...
jld3713 Posted March 7 Author Report Share Posted March 7 For all future purchases of these actuator knobs please go through gunbroker and contact user “1921 Industries”. We are only selling them on gunbroker going forward. Thank you for your support. Link to comment Share on other sites More sharing options...
Motorcar Posted March 7 Report Share Posted March 7 So they were $65, and the Gunbroker "Buy Now" price is $175? Just wondering. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now