Butch Posted February 2 Report Share Posted February 2 I have just begun adding Machine Guns to my collection. My first 2 were M50's. Unfortunetly the first one failed after about less than 40 rds. The ejector shiered off. I have the broken piece and have secured the replacement. It is a very nice Reising and I would like to locate soneone with experience. I joind this Fourm so I could ask for help. Thank You all, Butch Link to comment Share on other sites More sharing options...
StrangeRanger Posted February 2 Report Share Posted February 2 You are located...where? Link to comment Share on other sites More sharing options...
Butch Posted February 3 Author Report Share Posted February 3 Maryland Link to comment Share on other sites More sharing options...
fartsalot Posted February 11 Report Share Posted February 11 I know where you can send it if interested. Link to comment Share on other sites More sharing options...
Butch Posted February 12 Author Report Share Posted February 12 On 2/10/2025 at 10:30 PM, fartsalot said: I know where you can send it if interested. Yes please let me know. Thank you Link to comment Share on other sites More sharing options...
fartsalot Posted February 16 Report Share Posted February 16 I sent the info to your PM Freestate gun C0 Class 3 SOT 913-626-5185 Basehor Kansas I had my extractor screw come loose and they fixed it and replaced an extractor on an extra bolt I bought. I have the pleasure of their shop being only 15 miles for me. They can do most anything, they have a lathe and other machining tools. cut crowns,,parkerize,,mount scopes etc etc and I think I asked them if they could reline the barrel on my reising in case I wore it out and I think they said they could. Link to comment Share on other sites More sharing options...
StrangeRanger Posted February 16 Report Share Posted February 16 You keep conflating extractor and ejector. They are very different items and require different solutions/capabilities. The broken ejector needs to be pressed out and the replacement pressed in. Alignment is critical and some minor tooling fabrication would be necessary or at least helpful to the process https://www.ar15.com/forums/armory/_ARCHIVED_THREAD____Anyone_familiar_with_the_Reising_mod__50_ejector_/2-285798/ https://www.machinegunboards.com/forums/index.php?/topic/11991-broken-ejector/ Link to comment Share on other sites More sharing options...
Butch Posted February 23 Author Report Share Posted February 23 On 2/16/2025 at 12:42 PM, StrangeRanger said: You keep conflating extractor and ejector. They are very different items and require different solutions/capabilities. The broken ejector needs to be pressed out and the replacement pressed in. Alignment is critical and some minor tooling fabrication would be necessary or at least helpful to the process https://www.ar15.com/forums/armory/_ARCHIVED_THREAD____Anyone_familiar_with_the_Reising_mod__50_ejector_/2-285798/ https://www.machinegunboards.com/forums/index.php?/topic/11991-broken-ejector/ Yes mine is the ejector. Shown in the pictures Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now