SPIEMPASO Posted September 23, 2004 Report Share Posted September 23, 2004 Hello. I am deployed to Camp Anoconda, Iraq and with my little free time, we're always busy flying missions, I decided to get back into learning about weapons and fell deep into the thompson. I live in Illinois so I cannot owe a real Thompson, so I just bought, as a gift to myself for this deployment, a Model Gun Company 1921 Thompson blank firing, new with the rare 50 Round Drum. The stock set stain doesn't all match....... The pistol grip is a different color stain the the rest of the stock set. How do I strip down the stocks an get them ready for restaining? I want to refinish in the reddish stain, (like the picture of the Thompson on this board), how do I do it and where do I get the stain that I guess is like original? What goes on the stocks after the stain? I want to make this MGC Thompson look like an original 1921 Thompson for a nice wall hanger display and when board have fun shooting the blanks in it.. Appreciate the help guys. Also looking for a West Hurley Semi-Auto to buy from a private owner in Illinois. So if you have one let me know. Thank you, Keith Link to comment Share on other sites More sharing options...
SamG Posted September 23, 2004 Report Share Posted September 23, 2004 Keith, Where in ILL-inois? I'm in the Kapital. I know I don't need to tell you-but, be careful over there! Link to comment Share on other sites More sharing options...
The1930sRust Posted September 24, 2004 Report Share Posted September 24, 2004 Keith: Thanks so much for your service. Now, check the FAQ for some staining info... Link to comment Share on other sites More sharing options...
Ron Mills Posted September 24, 2004 Report Share Posted September 24, 2004 Keith: I'll echo the other gents' thanks for your service in Iraq. I stained my MGC wood to a nice red about 10 years ago, and it still looks nice; but I don't remember how I did it. Hey, that helps a lot, right? Do check the FAQ section on the board for staining info. Deerslayer, if you have time, maybe you can cut to the quick and help out our new member. Ron Mills Northern Illinois Link to comment Share on other sites More sharing options...
Grey Crow Posted September 24, 2004 Report Share Posted September 24, 2004 SPIEMPASO You have mail!! Sent the complete process from stripping to the final coat of oil. Link to comment Share on other sites More sharing options...
deerslayer Posted September 24, 2004 Report Share Posted September 24, 2004 You've probably checked the FAQ's by now, but get some oven cleaner and spray down the wood, let it sit for a while, then take steel wool and water and rub away. Removes finish and old oils really well. You'll need to do a little sanding after that. Stain and finish. It seems like MGC wood is often quite light in color. Hard to tell what species of wood was used. While most purists will insist on linseed oil, I really like birchwood casey true oil finish the best. Best wishes, Dan Link to comment Share on other sites More sharing options...
LIONHART Posted September 24, 2004 Report Share Posted September 24, 2004 Chu Wood Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now