MadDogDan Posted August 18, 2005 Report Share Posted August 18, 2005 My Kahr L Drum has two different click sounds that are hard to differentiate between each other. If you wind the drum key the 9 to 11 clicks that it says to, the drum doesn't work properly. I just spoke with Kahr and they told me that you count four audible clicks as "One True Click". If this is true why in the hell don't they say that in the instructions that come with the damn thing???? How many audible clicks do you wind your Kahr made L drums? MadDog http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/sad.gif Link to comment Share on other sites More sharing options...
Norm Posted August 18, 2005 Report Share Posted August 18, 2005 Ignore the little "clicks." It is the loud "CLUNKS!" that you count. Also, I think that one click (that counts) is 1/4 of a turn. Norm Link to comment Share on other sites More sharing options...
giantpanda4 Posted August 18, 2005 Report Share Posted August 18, 2005 Mad Dog is right - 1/4 turn + 1 click, so go about 2 and a quarter turns Link to comment Share on other sites More sharing options...
timkel Posted August 18, 2005 Report Share Posted August 18, 2005 Its a fairly easy job to fix the click problem. -Remove the rotor -examine the rivet heads on the inside back of the drum -set the 4 rivets again to flatten them down -then grind down the rivet heads some more -assemble the drum and test the drum clicks -when satisfied, reblue the rivet heads Done! Link to comment Share on other sites More sharing options...
Lotusnut Posted August 18, 2005 Report Share Posted August 18, 2005 as many as you like...won't work anyway.... Link to comment Share on other sites More sharing options...
Grey Crow Posted August 19, 2005 Report Share Posted August 19, 2005 Before doing anything check that the cartridges slide freely through the guide rails inside. 4 clicks = 1 turn so you will need 36 clicks for 9 complete turns. My Kahr L works great! (in a semi) PK stated in a very early post that in adjusted drums they worked good in the 28, and were slow in the 21. He also stated that he thought they might work in the 21 once they were run a while. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now