Jump to content

Frame Cracks?

Recommended Posts

New here, great site.

My question is about reported frame cracks in the West Hurley 1928. Has anyone found any cracks in their WH 28s?

I have shot mine several thousand shots and all seems to be ok.


In the case, if a frame was to crack, could you return it to the factory to be replaced?

I brought my wh 28 before the 86 band and at first I had trouble getting it to work right, I slicked up the inside, but it still did not work right, then I put a G.I. bolt in it and it has never stopped roaring since.


I am a collector of all kinds of guns, but the old Thompson M. G. will always hold a special place in my heart, It may not be a Colt or wartime model, But to me it does what I want it to do just fine.


Its so great that so many fellow collectors have a place here to share about the guns only a few of us will ever own and share so many details and experences from fellow shooters and collectors around the world, Thanks Again, Texas Man. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/rolleyes.gif

Link to comment
Share on other sites

Texas Man:


Welcome to the forum!


It is likely you could fire your Westy several hundred thousand rounds and not have the receiver crack, provided you are using standard Thompson parts. IMHO.


The issue of receiver cracking, I think, has been greatly overstated. There is a section about this in the FAQ above, but I think most of the problems (with receiver fatigue) stems from attempts at speeding up the cycling of the gun or remedying feeding problems by removing the ears of the Blish lock.


Returning it to the factory is not possible (or wise!) as far as I know. However, there are several well qualified Thompsonsmiths about who could repair such a crack. Be sure to check the FAQ.


Glad your West Hurley Thompson is living up to your expectations. Mine does too....



Link to comment
Share on other sites

http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif I have WH 1928 that I've run about 12000 rounds thru and It hasn't had any

problem. I did get a bufferTecnogly buffer for a min 14 and put in it, and a new

recoil spring in it thou. The gun runs great and I haven't had any problems. It

it's all G I except the reciever. http://www.machinegunbooks.com/forums/invboard1_1_2/upload/html/emoticons/smile.gif


Bob in Oregon

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Create New...