Wts: Brp Semi Mg42/mg3

[BLACKJOHN]

New only fire by BRP, MG42 AY gun 8mm BRP 4500$

400rds of new Greek ammo,bakelite and wood stock Bipod 2 DM1 belts,dummy rounds including.

 

Have tripods/belts/2 8mm drums with tray. 308/MG3 Hk drums complete 308 MG3 kits with new bbl sold seperately.

 

Trades Hk93/94/91/SP89, Galil ARM 372 223.Full size and Mini Uzi Valmets in 7.62x39 . PE57, Poly milled underfolders at fair markit value.

Thank you.

________________________________________________________________________________

 

More Onfo

I have a other BRP MG3/42 runs awesome :

MG42 by Brp.

Fires from a closed bolt with a pin a hammer; trigger pull 5-6 lbs can be made lighter. Looks like most internals are modified MG42 easy to fix. Original MG42 bolt modified to the closed bolt, drilled for spring loaded firing pin, on the back of the bolt added extension or sleeve to allow the hammer to travel were the recoil spring would be, shortened recoil spring. The lower fire control housing has a long AR type hammer and. New Stamped receivers and barrel jackets have the identical thickness as original MG-42 externally looks identical.

 

Most War 8mm and Post war MG3 308 parts will interchange:

Barrels, Feed trays, Booster cones, stock, sights, bipods, pistol grip panels.

308 will take m60 links or DM1 belts “Stick with the DM1 beltsâ€

MG3/42 parts

Parts:

Barrels new:

http://www.Dsarms.com

8mm to 308 in 15 minutes

Stock :

http://www.robertrtg.com/mgbuttstockniw.jpg

Barrel :

http://www.dsarms.com/item-detail.cfm?ID=M...toreid=1&image=

Feed tray

http://home.earthlink.net/~robertrtg/mg3feedtray.jpg

No need for a booster cone or extractor change from 8mm to 308 .

If you want the MG3 look can use:

http://home.earthlink.net/~robertrtg/mg3aasight.jpg

http://home.earthlink.net/~robertrtg/mg3bo...oster.jpg"

If you get a MG3 booster cone do not use with the 8mm setup .Tripods. MG3 Tripod a must.My tripod came from Tapco new Hk, 500$ with optics. Unbelievable quality. The Brp gun fits right on. Rapped fire from the MG3 tripod lets you run very fast! very little travail is needed using the fire lever built into the tripod. The best part is parts..

Cool MG3 Drums, box’s that clip right on the MG3 feed trays:

http://home.earthlink.net/~robertrtg/mg3dr...drumlinkkit.jpg

http://www.robertrtg.com/mg120rd.jpg

Belt loader: Original German Army .308 new very nice !

http://www.robertrtg.com/

 

 

 

[Abwehr]

I received my new SA MG-42 from BRP last week and the workmanship is exellent! Brian has done a good job on the conversion. The only thing I will do is add a little bluing to the charging handle which was on the thin side, and blue the extension added to the bolt for the SA operation.

 

I hope to be able to get the gun to the range over the Christmas Holidays and see if it shoots as good as it looks. I will be using the MG-3 ground tripod and also trying it on the MG-3 AA Tripod. All I need to do is get home for the Holidays and enjoy the new gun!