-
Posts
92 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Posts posted by Mojopin2010
-
-
I have a whole parts kit, a M3A1 with most of the bits and stuff . Give me few days I can post some pictures for you. Was gonna sell it on gunscammer eventually
-
Chuch is a good seller. I ended up getting one of his last unfinished shells a while back.
-
On 12/19/2023 at 11:38 PM, maxfaxdude said:
Dose guy have a www site, not particularly thrilled on my Wilson Tube MP-40, I am purchasing, a tube Owen guy seems to peak my interest more.
-
That would had been interesting to see how long the depot used it for. I know guys from the guard in the early to mid 1990's that said they still had M3 Grease Gun's in the arms room. Talking some of the old timers from the few Depots and proving grounfa I worked at the WW2 and Korean Civilian Guard force was entertaining during the 50/60/70's. The guys used to drink beer, smoke cigarettes and play cards on night shift. I was told they occasionally would go rabbit hunting on shift also along with other hijinks. It is a lot more formal now in reguards to weapons, but I could see a Reising being issued there for a long time.
- 1
-
1 hour ago, Duza9999 said:
No that sounds correct if I’m understanding you correctly.
Eform 4’s are currently only for dealers to other entities, a non dealer entity can’t use a eform 4 yet even if it would be going to a dealer.
That will be coming at some point in the future but until then we’re stuck with paper.
This is probably it. He did a tranfer a year or so ago from a dealer to a individual over eforms with SS kiosk. This is from a individual to him then to me, he is a relatively new SOT, so probably still learning the idiosyncrasies of all this stuff.
Thanks for clarification of this matter.
-
1 hour ago, Rekraps said:
That really doesn't sound right.
Nope, it doesn't. He seemed conflicted about it
-
I went today start my purchase of a out of state M/G and the dealer told me some funny news from the ATF.
He said he was advised by the ATF all Form 4 M/G's ( mine being a out of state individual to him then to me)had to go the paper route and not eforms. In addition they wanted papered finger print card and not etf files.
He was going to double check with them again on this issue, but he was confused as hell due to the "new", policy.
-
On 1/2/2024 at 6:58 AM, GUNGUY45 said:
I did it for my Reising M50, & my M76/45 Stemple.
I got 8, or 9 pages of heavily redacted info on the Reising.
There was some good info, as I found out it spent WW2 in Chambersburg, PA, with the "Chief of Guards", whoever that was.
The Stemple, not much info, but I did get it's "born on" date.
I did this in the early 2000's.
What if it was the cilvian guard force at Letterkenny depot
-
Starting the Form 4 from MD to PA for a Wilson Tube MP-40. Any high wear parts that I should consider stocking up on?
-
Finally buying that MP-40 Wilson Tube , and I wondering on magazines.
Keep shooting has new production now and then for sale and obviously there are NOS and used magazines for sale all over the internets.
Thoughts ?
-
2 hours ago, StrangeRanger said:
There's this one listed on GunSpot for $20K negotiable
https://gunspot.com/listings/detail/15715/rare-original-french-mle-1938-mas-submachinegun/
So the guy on GB is asking $4.75K for a caliber conversion of unknown provenance and reliability. That seems a bit steep to me.
I dug out my reference material and looked at possible conversions for the MAS and I have to say whoever picked .380 did their homework. Working within the cartridge length and pressure limits of the 7.65 Longue I could find only 3 candidates among commonly available cartridges: .32ACP, .380ACP and 9x18 Makarov. The .32 ACP is anemic at best. The Makarov may provide better performance than the .380 but considering the cost difference probably not worth it.
So a pretty good idea but $4.75K??
I definitely never seen them go for 20k. Seem to hover around 10k , last one I saw on GB was 9k as I recall.
A 9mm Makarov would definitely peak my interest if it was a easy conversion.
I am purchasing a Wilson Tube MP-40, so my available cash has significantly decreased. Though, honestly I am not to keen on actual purchase , it is just underpriced so hard to pass up.
-
-
I had Gary trouble shoot my RR lower that people locally couldn't get working right and John Andrewski finished up my bare Medea M3A1 shell to a working gun.
Put a bid on Lewis Gun from Morphies see how it gose.
-
5 hours ago, StrangeRanger said:
If a BAR clone is on your list of possibles, these are just outside your budget and probably worth considering
https://www.sturmgewehr.com/forums/index.php?/topic/32944-wts2-ermco-bars-on-form-4s/
Just saw that today, gotta wait till this wilson tube mp-40 deals works through.
Overtime is pretty insane so need a few months to save up.
-
-
Thinking about getting a LMG of some flavor after firing a Lewis gun recently ( missed my m240 days). I figure about a 30k budget and would prefer something that is easy to maintain for a low IQ person like myself.
There is a reasonably priced type 96 on G/B I think, are the 7.62x39 conversions viable??
-
On 7/23/2023 at 2:34 PM, Rekraps said:
Can't go wrong with the Curtis Tactical Integral. It frees me up from going to the range! Now everywhere is my range!
They sold out to another company apparently
-
I was getting some light primer strikes though I dunno if it was from magazine or ammo issues at this point. Was letting some new shooterstry out the gun and a nice tug down in the magazine seemed to clear up the issues . The thing needs a deep clean now that is a couple thousand rounds in without a tear down.
-
11 hours ago, Rekraps said:
Ya.... good observation. My M3 configured exactly the same has a noticeably slower ROF. Lighter rounds perhaps?
230 grain CCi bulk
-
-
1 hour ago, Rekraps said:
Man what a deal. I am jealous.
They looked into selling via auction, I guess a firm price is better than a unknown one
-
5 hours ago, Rekraps said:
What ammo are you shooting?
Steel case Barnal, think it runs a bit spicy
-
They settled on 13k. Gonna take it, refinish and put it away as a investment item longterm/ shooter.
-
Fair market value for a transferrable Owen "tube" SMG?
in The Owen Gun Message Board
Posted · Edited by Mojopin2010