BluYondr66

Thank you all for your comments. I will see if I can get a picture and successfully upload it this weekend. I will also look up IMA and see what is for sale. Thank you!

I have a British 303 pan that was filled with grease. I recently cleaned the grease out and upon inspection found that the pan body has a crack in the exterior that runs from top side down one of the ways/loading areas where 2 rounds get stacked. I hope that makes sense, I am not sure what the proper terminology would be for that. At any rate, I am curious if this is something that can be repaired, or is really just for display. I greatly appreciate your comments and advice. Many thanks, John

I also don't know the answer, but my TM1 performs the same.

Thank you for that idea, I will check that.

Greetings all, After years of wanting, I recently became owner of a new Kahr/A-O TM1. This past weekend was our first outing at the range. I put 150 rounds through with almost no problem, a great way to start. My question is this. I have the new Kahr 30 round mag and a Kahr 20 round mag. I believe both to be new production as the mag catch holes are round. Both lock into the gun securely. Feeding was reliable except every now and then from the 30, and every time from the 20, the bolt would lock back with one final round remaining in the magazine. Would it be correct that the most likely culprit is the bolt catch tab on the mag follower and the solution that said tab just needs to be taken down ever so much? Thank you in advance for you courtesies with this! Happy new owner, John