Countryboy77
-
Posts
226 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Forums
Gallery
Posts posted by Countryboy77
-
-
5 hours ago, choppero said:
Is there any problem using new aluminum lowers on older west hurley pistols?
Not as long as it is in spec.Will just be lighter
-
You need to make a display of Doug's stuff like an omage to his work.
-
Well seems because the pose says it came from a police dept. And it's nickel its colt The finish is wrong if your one of the bidders do your due diligence in research before trying to grab somthingvon the auction block Time to take these usa black crinkle clean the paint off nickel and make 2000% profit Know how to tell its a knock off( it's a pretty good one) look at the texture of the photo looking down at the cap showing made in the USA.see the bead blast texture?The sides was all polished correctly but the top was overlooked and not seen on originals.Somone tool a reproduction polished sides and bottom and nickel plated it again.Colt oiler guys tell me I'm wrong I hope I'm wrong I never like people overpaying or cheated
-
Looking at the detail of the knurling if it's not investment cast they would have to been knurled after and if they are as hard as they are saying probly a quality cast .Ruger uses investment cast parts but they are using quality refined metals and been doing it a long time. It's about the materials and attention to details .If they are as hard as said maybe they should be annealed before cutting to 21 configuration and that would make them less brittle and less prone to breakage if they are 4140.Casting can be just as strong as billet and most castings get finish machining lapping ect.For the price I'm buying 2.I will be doing exactly as I say and when I get home hardness reading I will post it before and after anneal.
-
1
-
-
My That is the Most INTERESTING Thompson I have seen in a looking time.I believe you have somthing rare there!
-
2
-
-
Gunbroker doesn't confront if they keep paying their bill.lots of scammers and people who don't always send what is sold but go on selling.Tgey don't care doubt anyone looked into it.
-
The center section is not Original to the kit,so the original kit didn't have the centerpiece,that had to be added .Not illegal unless you piss someone off and they want you.
-
Incorrect.Several SOT's that gave up licenses cut guns once or twice and that was legal (and overseen and approved of by local ATF) so the destruction tion by saw is fine here.Even contraband firearms were being destroyed by police by saw by many small departments.The torch cuts was ONLY importers.The kit for sale is legal to sell as it Is destroyed ,I'm not an attorney but lots of incorrect 'ideas' based on people trying to use common sense and come to conclusions that it 'seems' like it should be illegal and people wishing to steer clear tells everyone they should follow their interpretations and why they think they are right.Talk to a knowledgeable firearms attorney, that's what most of us do when we have questions important enough.If you piss someone off they will prosecute you for anything ,even a drawing on a piece of metal can get you thrown in the pokey.
-
Rivets! Use rivets!
-
I stopped doing sales on there shortly after taxes. Sold an expensive item never got paid and they would never straighten out the fees and taxes for it.Many emails and attempts to reach out I finally had them reach out once more to say the buyer said they paid and I told them impossible get proof and nothing.Had several non paying bidders around the taxes.
-
Take a little off the face of tge receiver so it turns around enough you can torque it and be done.
-
Hell buff it and turn it GOLD!!get it nicely tastefully Engraved.
-
Even if it's plastic,if a bolt will go inside it would be a felony.
-
Notice no photos of the threads
-
My buddy that still drives tanks for tge reserves think it was probly a tracer device and mag was probly loaded with tracers,but I'm sure it could keepsomone from shoving wedges in tge muzzel
-
Even if modified for semi auto you can get a donor mag and swap rear straps with the hole .The magazine bodies can be taken apart and the 'V' front saved and the rear replaced like it was never converted
-
1
-
-
You only have to worry about detachable stocks on guns that without a stock don't meet the 26" overall length even though the barrel is 16",like uzis ect.
-
1
-
-
Had to be drugs.Somone at Kahr.This is What a Redneck on LSD would do to his Thompson after watching Dukes of Hazard. I thought case hardened Thompson was ugly ,This makes Case Hardened Thompson not look so bad.After years of Infamy the Thompson has to be subject to this! Sorry time for Kahr to end their Thompson line
-
We all should agree it's ALL a 2nd Amendment Infringement and should help based on that alone. The first time in years there's momentum gaining against the NFA and we should be helping EVERY case to prevent any Precedents from being set.!!. Your Not a true 2A supporter if you support ANY of these laws. Yes do what you have to do to stay legal ,but 2A owners need to unite. Too many older crowd happy with what they have and are like damn the rest and that's wrong
-
2
-
-
If any more turn up or 1 falls through I'm interested
-
Put it on Gunbroker and see where it goes. Market been high on Richardson 80% receivers even though Philadelphia ordnance puts out an equal product,even their products have been out of stock for awhile .
-
Maybe it's not Richardson knockoff,but whoever produced it marking it not even knowing Richardson.I don't think someone would knock it off.
-
The oiler might help relieve some stress on the rear but with no blish lock ears to come in contact with the pads it's useless.
-
Mr Bill,you really should post photos
Engraved M1927A1 Semi-Automatic Carbine
in Thompson Semi-Auto Discussion Forum (West Hurley & Kahr Semis)
Posted
Look at the lower,no markings eigther.This looks home built by a garage craftsman.Bet that's a Philly blank