Need "Type 2" Firing Pin

[floyd556]

I have a late '80s west hurley semi

I was told i need a type 2 firing pin which ...has a rectangular tip instead of round

 

Does anyone have one i could purchase

Also

I saw the thread.

But is there someone who could contact me

And walk me through modifying a GI MAG CATCH to accept standard mags?? In my semi

[Gio]

floyd556,

 

If you have seen the mag modifying thread with the pics and have a Dremal tool and small files you can do it. Don't cut off to much and install the mag catch as you go you only have to get the mag to set 1/10" lower.

 

As for firing pin check with Sarco or Numrick they may have one.

 

Good luck,

Frank

[T Hound]

There is a difference, I have seen, but cannot post the photo simply because

of the copyright rules for this forum. Sarco or Numerich are probably your

only hope. But here is another suggestion. Use a Kahr bolt and firing pin. That should

work as a substitute given that the lower frame and bolt recess are the same. I mean

if your only goal is to get it working. On the other hand, if you want authenticity then

go luck brother.

Edited January 9, 2013 by T Hound