Dp28 Posted February 17, 2021 Report Share Posted February 17, 2021 I've got a mg34 semi auto that has a serial numberLooks like a tnw from bottom but does not have the serial.The front 2 inches was missing so I found one from a cut 34 and had lewman arms assemble it.Problem is that the back portion1 lacks an ejection port cover hole 2 the barrel in her hole is drilled for the big part of the plunger but not the smaller part that slides into the spring.I can't use it as isWho can i send it to to do the machine work Link to comment Share on other sites More sharing options...
Dp28 Posted February 17, 2021 Author Report Share Posted February 17, 2021 Inner hole* not in her hole Link to comment Share on other sites More sharing options...
Ryo Posted February 24, 2021 Report Share Posted February 24, 2021 2 the barrel in her hole is drilled for the big part of the plunger but not the smaller part that slides into the spring.Had a good laugh.. So your trying to modify the TNW to accept a ejector cover? Any reason why?Mine (real MG34, mismatch S/N) broke the ejection cover spring, hence it stays open rather than closed. As for the S/N it's on the ring near the stock attachment. (or at least it was for me. Pain to find due to all the mismatch parts) Link to comment Share on other sites More sharing options...
peter kohler Posted February 26, 2021 Report Share Posted February 26, 2021 my mg34 ejection cover door stays open Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now