-
Posts
80 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by elvis3006
-
Receiver not stripped, bolt is not in the firearm.
-
Took the barrel out of my semi auto TNW MG34 and then closed the receiver and barrel shroud back without barrel in shroud. Now I cannot open the receiver and shroud anymore. I press on the receiver catch and the two parts will not rotate open. HELP LOL ! Thank you
-
I got two of Bula's BM59 barrels and so far I have some reservations. I do not know what the true size of the BM59 gas port hole is but I can easily fit a 5/64 drill bit in it. And the splines for the fitting of the gas cylinders may be out of spec. The gas cylinders wobble a bit, but I know the cylinders could be worn out. Also after firing 40 rounds there is a lot of carbon build up behind the splines and gas cylinder pictured here. Perhaps people here more knowledgeable can say if this is normal or not. Thank you
-
Thank you Ursula I miss my BD38 also. Having the MP38 is great but she do not go bang
-
Also how do you remove the folding stock from the pistol grip ?
-
Hi Ursula I just got it this week an old style deactivation cock and click. Numbers do not match though but otherwise in great shape. Thank you for the tip will try a magnet. And thank you Ron. Regards. Rob
-
Thank you, I am removing the resting bar to re blue. Are those made of aluminum and will they blue ?
-
I have a deactivated MP38 and want to know if there is a particular way to remove roll pins. Does it matter if it is removed left to right or vise versa ? Thank you.
-
Hi Jeff I know what you mean lol. What I do with my OOW 1918A3 is pretty much as you see in the video, perhaps try wearing a glove. Not sure if this will help, maybe give you more grip and prevent cuts. Also check YouTube for disassemble/reassembly videos. Regards. Rob
-
M1 & M1A1 Thompson Pictures (Dewat)
elvis3006 replied to elvis3006's topic in Thompson Submachine Gun Message Board
Thanks Kocapuff1 , yes there are two different Thompsons in these pictures I have two dewats. An M1 Thompson and M1A1 Thompson, wish I could legally own functioning versions. -
M1 & M1A1 Thompson Pictures (Dewat)
elvis3006 replied to elvis3006's topic in Thompson Submachine Gun Message Board
Thank you Slimpikins and to everyone else for the compliments. The barrel band on this one is actually needed the fore stock actually wobbled too much without it. -
Hello Johnny70 welcome to the forum. That is a fine example of an M1 Thompson too bad it is a deact,what are you able to do with it, can you cycle the action and field strip it ?
-
M1 & M1A1 Thompson Pictures (Dewat)
elvis3006 replied to elvis3006's topic in Thompson Submachine Gun Message Board
Sorry for the poor quality the sun was not shinning to provide better light for the pictures. -
M1 & M1A1 Thompson Pictures (Dewat)
elvis3006 replied to elvis3006's topic in Thompson Submachine Gun Message Board
http://i38.servimg.com/u/f38/17/34/77/50/00712.jpg -
Thompson Savage M1A1 Replica Build
elvis3006 replied to Kocapuff1's topic in Thompson Submachine Gun Message Board
Great looking piece and thank you for the pictures. -
M1 & M1A1 Thompson Pictures (Dewat)
elvis3006 replied to elvis3006's topic in Thompson Submachine Gun Message Board
Thanks for the compliments guys. I did not take anymore pictures on my tromp in the snow, but I can take more if you wish. Also I have a thread on here of my M1 and M1A1 dewats, think you must use the search engine here for them. -
Stress Cracks Butt Stock
elvis3006 replied to elvis3006's topic in Thompson Submachine Gun Message Board
Thank you. I have several used M1 M1A1 butt stocks and most have these cracks. -
Is it common for the M1 and M1A1 Thompson butt stocks to develop stress cracks where the stock meets the lower frame ?
-
OOW M1918A3 BAR semi auto video
elvis3006 replied to elvis3006's topic in Browning Message Board (Semi Only)
Very nice thanks for sharing, got more ? Wish I could load a full mag on mine ! -
OOW M1918A3 BAR semi auto video
elvis3006 replied to elvis3006's topic in Browning Message Board (Semi Only)
Hi Darryl yes they are blocked to 5 rds unfortunately. -
Hi everyone here is a little video of me shooting my OOW M1918A3 BAR semi auto, nothing exciting hope you enjoy. http://youtu.be/y5S51EMZxus
-
Mk 1 Bren gun stock removal
elvis3006 replied to elvis3006's topic in Bren Light Machine Gun & Lewis Gun Message Board
Thank you for the information. -
Wild Bill Guarnere has passed away
elvis3006 replied to full auto 45's topic in Thompson Submachine Gun Message Board
RIP Jumper.